SAMPLEKITM0-7

SAMPLEKITM0-7 M0-7 Sample kit box Data brief   Immediate evaluation of M0-7 devices with demonstration examples The kit includes:  10 samples  Printed card providing overview of product portfolio, key features, main applications, package description. Description The SAMPLEKITM0-7 provides a selection of M0-7 samples representative of the entire family useful for evaluating and promoting M0-7 VIPower product family. Table 1: Device summary Order code SAMPLEKITM0-7 Features Channels RDS(on) Package Single 4 mΩ 7 mΩ Octapak Single 10 mΩ PowerSSO-16 Single 40 mΩ SO-8 Double 12 mΩ PowerSSO-36 Double 20 mΩ PowerSSO-16 Quad (alternatively) 50 mΩ PowerSSO-16 January 2015 DocID027225 Rev 1 For further information contact your local STMicroelectronics sales office Reference M0-7 Sample kit box 1/5 www.st.com Contents SAMPLEKITM0-7 Contents 1 Overview .......................................................................................... 3 2 Revision history .............................................................................. 4 2/5 DocID027225 Rev 1 SAMPLEKITM0-7 1 Overview Overview ® MO-7 high-side drivers are manufactured using ST proprietary VIPower technology and housed in PowerSSO-16, Octapak and PowerSSO-36 packages. They are intended to drive 12 V automotive grounded loads through a 3 V and 5 V CMOS-compatible interface, and to provide protection and diagnostics. The family integrates advanced protective functions such as load current limitation, overload active management by power limitation and overtemperature shutdown with configurable latch-off. A FaultRST pin unlatches the output in case of fault or disables the latch-off functionality. A dedicated multifunction multiplexed analog output pin delivers sophisticated diagnostic functions such as high precision proportional load current sense, supply voltage feedback and chip temperature sense, in addition to the detection of overload and short circuit to ground, short to V CC and OFF-state open-load. A sense enable pin allows OFF-state diagnosis to be disabled during the module low-power mode as well as external sense resistor sharing among similar devices. DocID027225 Rev 1 3/5 Revision history 2 SAMPLEKITM0-7 Revision history Table 2: Revision history 4/5 Date Revision 07-Jan-2015 1 DocID027225 Rev 1 Changes Initial release. SAMPLEKITM0-7 IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2015 STMicroelectronics – All rights reserved DocID027225 Rev 1 5/5 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: STMicroelectronics: SAMPLEKITM0-7