SM6T10CA

SM6T Datasheet 600 W TVS in SMB Features K • • • • • Peak pulse power: 600 W (10/1000 μs) and 4 kW (8/20 μs) Stand-off voltage range from 5 V to 188 V Unidirectional and bidirectional types Low leakage current: 0.2 μA at 25 °C and 1 μA at 85 °C Operating Tj max: 150 °C • High power capability at Tj max.: up to 515 W (10/1000 µs) • Lead finishing: matte tin plating Complies with the following standards A Bidirectional Unidirectional • • • • • • • • Product status link SM6T SM6T6V8A, SM6T6V8CA, SM6T7V5A, SM6T7V5CA, SM6T10A, SM6T10CA, SM6T12A, SM6T12CA, SM6T15A, SM6T15CA, SM6T18A, SM6T18CA, SM6T22A, SM6T22CA, SM6T24A, SM6T24CA, SM6T27A, SM6T27CA, SM6T30A, SM6T30CA, SM6T33A, SM6T33CA, SM6T36A, SM6T36CA, SM6T39A, SM6T39CA, SM6T56A, SM6T56CA, SM6T68A, SM6T68CA, SM6T75A, SM6T75CA, SM6T100A, SM6T100CA, SM6T150A, SM6T150CA, SM6T200A, SM6T200CA, SM6T220A, SM6T220CA UL94, V0 J-STD-020 MSL level 1 J-STD-002, JESD 22-B102 E3 and MIL-STD-750, method 2026 solderable matte tin plated leads JESD-201 class 2 whisker test IPC7531 footprint JEDEC registered package outline IEC 61000-4-4 level 4: – 4 kV IEC 61000-4-2, C = 150 pF - R = 330 Ω exceeds level 4: – 30 kV (air discharge) – 30 kV (contact discharge) Description The SM6T series are designed to protect sensitive equipment against electrostatic discharges according to IEC 61000-4-2 and MIL STD 883, method 3015, and electrical overstress according to IEC 61000-4-4 and 5. This device is more generally used against surges below 600 W (10/1000 μs). The Planar technology makes it suitable for high-end equipment and SMPS where low leakage current and high junction temperature are required to provide reliability and stability over time. The SM6T series are packaged in SMB. DS0684 - Rev 13 - June 2021 For further information contact your local STMicroelectronics sales office. www.st.com SM6T Characteristics 1 Characteristics Table 1. Absolute maximum ratings (Tamb = 25 °C) Symbol Parameter Value Unit Contact discharge 30 kV Air discharge 30 10/1000 µs, Tj initial = Tamb 600 W IEC 61000-4-2 (C = 150 pF, R = 330 Ω) VPP Peak pulse voltage PPP Peak pulse power dissipation Tstg Storage temperature range -65 to +150 °C Tj Operating junction temperature range -55 to +150 °C TL Maximum lead temperature for soldering during 10 s 260 °C Figure 1. Electrical characteristics - parameter definitions Figure 2. Pulse definition for electrical characteristics DS0684 - Rev 13 page 2/13 SM6T Characteristics Table 2. Electrical characteristics - parameter values (Tamb = 25 °C, unless otherwise specified) Type 25 °C 85 °C µA 10 / 1000 µs VBR at IBR (1) IRM max at VRM VCL Min. Typ. Max. V V (2)(3) (4) IPP Max. 8 / 20µs RD VCL (2)(3) Max. Max. IPP(4) RD αT Max. Max. mA V A Ω V A Ω 10-4/°C SM6T6V8A/CA 20 50 5.80 6.45 6.8 7.14 10 10.5 57 0.059 14.4 275 0.027 5.7 SM6T7V5A/CA 20 50 6.40 7.13 7.5 7.88 10 11.3 53 0.065 15.2 266 0.027 6.1 SM6T10A/CA 20 50 8.55 10.0 10.5 1 14.5 41 0.098 18.6 215 0.038 7.3 SM6T12A/CA 0.2 1 10.2 11.4 12 12.6 1 16.7 36 0.114 21.7 184 0.049 7.8 SM6T15A/CA 0.2 1 12.8 14.3 15 15.8 1 21.2 28 0.193 27.2 147 0.078 8.4 SM6T18A/CA 0.2 1 15.3 17.1 18 18.9 1 25.2 24 0.263 32.5 123 0.111 8.8 SM6T22A/CA 0.2 1 18.8 20.9 22 23.1 1 30.6 20 0.375 39.3 102 0.159 9.2 SM6T24A/CA 0.2 1 20.5 22.8 24 25.2 1 33.2 18 0.444 42.8 93 0.189 9.4 SM6T27A/CA 0.2 1 23.1 25.7 27 28.4 1 37.5 16 0.569 48.3 83 0.240 9.6 SM6T30A/CA 0.2 1 25.6 28.5 30 31.5 1 41.5 14.5 0.690 53.5 75 0.293 9.7 SM6T33A/CA 0.2 1 28.2 31.4 33 34.7 1 45.7 13.1 0.840 59.0 68 0.357 9.8 SM6T36A/CA 0.2 1 30.8 34.2 36 37.8 1 49.9 12 1.01 64.3 62 0.427 9.9 SM6T39A/CA 0.2 1 33.3 37.1 39 41.0 1 53.9 11.1 1.16 69.7 57 0.504 10.0 SM6T56A/CA 0.2 1 47.6 53.2 56 58.8 1 76.6 7.8 2.28 100 40 1.030 10.0 SM6T68A/CA 0.2 1 58.1 64.6 68 71.4 1 92 6.5 3.17 121 33 1.503 10.4 SM6T75A/CA 0.2 1 64.1 71.3 75 78.8 1 103 5.8 4.17 134 30 1.84 10.5 SM6T100A/CA 0.2 1 85.5 95.0 100 105 1 137 4.4 7.27 178 22.5 3.24 10.6 SM6T150A/CA 0.2 1 128 143 150 158 1 207 2.9 16.9 265 15 7.13 10.8 SM6T200A/CA 0.2 1 171 190 200 210 1 274 2.2 29.1 353 11.3 12.7 10.8 SM6T220A/CA 0.2 1 188 209 220 231 1 328 2 48.5 388 10.3 15.2 10.8 9.5 1. To calculate VBR versus Tj : VBR at Tj = VBR at 25 °C x (1 + αT x (Tj - 25)) 2. To calculate VCL versus Tj : VCL at Tj = VCL at 25 °C x (1 + αT x (Tj - 25)) 3. To calculate VCL max versus IPPappli: VCLmax = VBR max + RD x IPPappli 4. Surge capability given for both directions for unidirectional and bidirectional devices DS0684 - Rev 13 page 3/13 SM6T Characteristics (curves) 1.1 Characteristics (curves) Figure 3. Maximum peak power dissipation versus initial junction temperature Figure 4. Maximum peak pulse power versus exponential pulse duration Ppp (W) 700 100.0 10/1000 µs PPP(kW) Tj initial = 25 °C 600 500 10.0 400 300 1.0 200 100 Tj (°C) 0 0 25 50 75 100 125 150 175 Figure 5. Maximum peak pulse current versus clamping voltage 10000 IPP (A) 0.1 1.0E-03 t P(ms) 1.0E-02 1.0E-01 1.0E+00 1 1.0E+01 Figure 6. Dynamic resistance versus pulse duration (typical values) 1000 RD (Ω) 8/20 µs 100 10/1000 µs 1000 10 100 1 SM6T100A/CA DS0684 - Rev 13 10 SM6T68A/CA 1 SM6T30A/CA 0.1 SM6T15A/CA SM6T6V8A/CA 1 100 SM6T220A/CA 10 SM6T220A/CA SM6T68A/CA 0.1 0.01 V CL (V) 1000 SM6T30A/CA SM6T6V8A/CA 0.001 0.01 tp (ms) 0.1 1 10 page 4/13 SM6T Characteristics (curves) Figure 7. Junction capacitance versus reverse applied voltage (unidirectional types) C (pF) 10000 Figure 8. Junction capacitance versus applied voltage (bidirectional type) C (pF) 10000 f = 1 MHz Vosc = 30 mVRMS Tj = 25 ° C f = 1 MHz Vosc = 30 mVRMS Tj = 25 °C 1000 SM6T6V8A SM6T6V8CA 1000 SM6T15CA SM6T15A 100 SM6T30CA 100 SM6T30A SM6T68CA SM6T100CA SM6T68A 10 SM6T100A SM6T220CA SM6T220A 10 V R (V) 1 10 100 1000 Figure 9. Leakage current versus junction temperature IR (nA) 1000 1 V R (V) 1 100 1000 Figure 10. Peak forward voltage drop versus peak forward current IF (A) 100 VR=VRM 10 single pulse 100 VRM < 10V 10 Tj = 125 °C 10 Tj = 25 °C VRM ≥ 10V 1 1 0 Tj (°C) 25 50 75 100 125 150 Figure 11. Thermal impedance junction to ambient versus pulse duration 1000 0 VF (V) 0 0.5 1 1.5 2 2.5 3 Figure 12. Thermal resistance junction to ambient versus copper area under each lead Zth(j-a) (°C/W) Rth(j-a) (°C/W) 150 Single pulse on recommended footprint. Epoxy printed circuit board FR4, 70 µm Cu thickness Single pulse on recommended footprint .Epoxy printed circuit board FR4, 70 µm Cu thickness 120 100 90 60 10 30 1 0.01 DS0684 - Rev 13 tp (s) 0.1 1 10 100 1000 0 SCu (cm²) 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 page 5/13 SM6T Package information 2 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark. 2.1 SMB package information Figure 13. SMB package outline E1 D E A1 C A2 b L Table 3. SMB package mechanical data Dimensions Inches(1) Millimeters Ref. Min. Max. Min. Max. A1 1.90 2.45 0.0748 0.0965 A2 0.05 0.20 0.0020 0.0079 b 1.95 2.20 0.0768 0.0867 c 0.15 0.40 0.0059 0.0157 D 3.30 3.95 0.1299 0.1556 E 5.10 5.60 0.2008 0.2205 E1 4.05 4.60 0.1594 0.1811 L 0.75 1.50 0.0295 0.0591 1. Values in inches are converted from mm DS0684 - Rev 13 page 6/13 SM6T SMB package information Figure 14. SMB recommended footprint 1.62 0.064 2.60 (0.102) Figure 15. Marking layout 1.62 0.064 2.18 (0.086) 5.84 (0.230) millimeters (inches) Figure 16. Package orientation in reel Bidirectional Figure 17. Tape and reel orientation Unidirectional Taped according to EIA-481 Pocket dimensions are not on scale. Pocket shape may vary depending on package On bidirectional devices, marking and logo may not be always in the same direction. Figure 18. Reel dimensions (mm) DS0684 - Rev 13 Figure 19. Inner box dimensions (mm) page 7/13 SM6T SMB package information Figure 20. Tape and reel outline Table 4. Tape and reel mechanical data Dimensions Millimeters Ref. DS0684 - Rev 13 Min. Typ. Max. ØD0 1.5 1.55 1.6 ØD1 1.5 F 5.4 5.5 5.6 K0 2.64 2.74 2.84 P0 3.9 4.0 4.1 P1 7.9 8.0 8.1 P2 1.9 2.0 2.1 W 11.7 12.0 12.3 page 8/13 SM6T Reflow profile 2.2 Reflow profile Figure 21. ST ECOPACK recommended soldering reflow profile for PCB mounting 250 240-245 °C Temperature (°C) -2 °C/s 2 - 3 °C/s 60 sec (90 max) 200 -3 °C/s 150 -6 °C/s 100 0.9 °C/s 50 Time (s) 0 Note: DS0684 - Rev 13 30 60 90 120 150 180 210 240 270 300 Minimize air convection currents in the reflow oven to avoid component movement. Maximum soldering profile corresponds to the latest IPC/JEDEC J-STD-020. page 9/13 SM6T Ordering information 3 Ordering information Figure 22. Ordering information scheme SM 6 T XX CA Surface mount Peak pulse power 6 = 600 W Transil in SMB Breakdown voltage 30 = 30 V Types CA = Bidirectional A = Unidirectional Table 5. Ordering information DS0684 - Rev 13 Order code Marking Package Weight Base qty. Delivery mode SM6TxxxA / CA See Table 6. Marking SMB 0.11 g 2500 Tape and reel page 10/13 SM6T Ordering information Table 6. Marking Order code DS0684 - Rev 13 Marking Order code Marking SM6T6V8A DE SM6T6V8CA LE SM6T7V5A DG SM6T7V5CA LG SM6T10A DP SM6T10CA LP SM6T12A DT SM6T12CA LT SM6T15A DX SM6T15CA LX SM6T18A EE SM6T18CA ME SM6T22A EK SM6T22CA MK SM6T24A EM SM6T24CA MM SM6T27A EP SM6T27CA MP SM6T30A ER SM6T30CA MR SM6T33A ET SM6T33CA MT SM6T36A EV SM6T36CA MV SM6T39A EX SM6T39CA MX SM6T56A FL SM6T56CA NL SM6T68A FQ SM6T68CA NQ SM6T75A FS SM6T75CA NS SM6T100A FY SM6T100CA NY SM6T150A GL SM6T150CA OL SM6T200A GU SM6T200CA OU SM6T220A GW SM6T220CA OW page 11/13 SM6T Revision history Table 7. Document revision history DS0684 - Rev 13 Date Version Changes Aug-2001 4 Previous update. 15-Sep-2004 5 1. Types table parameters on page 2: IRM @ Tj = 85 °C condition added 2. IRM max values changed 26-Mar-2009 6 Reformatted to current standard. SMB dimensions and footprint updated. Maximum junction temperature replaced with operating junction temperature range in Table 1. 25-May-2009 7 Reformatted to current standard. Added standards compliance information on page 1. Added device SM6T56 to Table 3. Updated all characteristic curves. 17-Sep-2009 8 Document updated for low leakage current. 20-Oct-2009 9 Updated Figure 13. 10-Jan-2018 10 Updated Table 3: "Electrical characteristics parameter values (Tamb = 25 °C, unless otherwise specified)". 03-Sep-2020 11 Updated Section 1.1 Characteristics (curves). 11-Sep-2020 12 Minor text change. 02-Jun-2021 13 Updated Figure 12. page 12/13 SM6T IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. For additional information about ST trademarks, please refer to www.st.com/trademarks. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2021 STMicroelectronics – All rights reserved DS0684 - Rev 13 page 13/13