SMC30J24CA

SMC30JxxA, SMC30JxxCA Datasheet 3000 W TVS in SMC Features • • • • • Peak pulse power: – 3000 W (10/1000 μs) – up to 36 kW (8/20 μs) Stand-off voltage range from 5 V to 48 V Unidirectional and bidirectional types Low leakage current: 0.2 µA at 25 °C Operating Tj max: 175 °C • • • JEDEC registered package outline Resin meets UL94, V0 Lead finishing: matte tin plating Complies with the following standards • • • • • • Product status link SMC30J SMC30J5.0A, SMC30J5.0CA, SMC30J6.0A, SMC30J6.0CA, SMC30J6.5A, SMC30J6.5CA, SMC30J8.5A, SMC30J8.5CA, SMC30J10A, SMC30J10CA, SMC30J12A, SMC30J12CA, SMC30J13A, SMC30J13CA, SMC30J15A, SMC30J15CA, SMC30J16A, SMC30J16CA, SMC30J18A, SMC30J18CA, SMC30J20A, SMC30J20CA, SMC30J22A, SMC30J22CA, SMC30J24A, SMC30J24CA, SMC30J26A, SMC30J26CA, SMC30J28A, SMC30J28CA, SMC30J30A, SMC30J30CA, SMC30J33A, SMC30J33CA, SMC30J36A, SMC30J36CA, SMC30J40A, SMC30J40CA, SMC30J48A, SMC30J48CA • UL94, V0 J-STD-020 MSL level 1 J-STD-002, JESD 22-B102 E3 and MIL-STD-750, method 2026 JESD-201 class 2 whisker test IPC7531 footprint and JEDEC registered package outline IEC 61000-4-4 level 4: – 4kV IEC 61000-4-2, C = 150 pF, R = 330 Ω exceeds level 4: – 30 kV (air discharge) – 30 kV (contact discharge) Description The SMC30J TVS series are designed to protect sensitive equipment against electrostatic discharges according to IEC 61000-4-2, MIL STD 883 Method 3015, and electrical overstress such as IEC 61000-4-4 and 5. They are used for surges below 3000 W 10/1000 μs. This planar technology makes it compatible with high-end equipment and SMPS where low leakage current and high junction temperature are required to provide reliability and stability over time. DS8598 - Rev 5 - March 2020 For further information contact your local STMicroelectronics sales office. www.st.com SMC30JxxA, SMC30JxxCA Characteristics 1 Characteristics Table 1. Absolute maximum ratings (Tamb = 25 °C) Symbol Parameter Value Unit Contact discharge 30 kV Air discharge 30 IEC 61000-4-2 (C = 150 pF, R = 330 Ω) VPP Peak pulse voltage PPP Peak pulse power dissipation Tstg Tj initial = Tamb 3000 W Storage temperature range -65 to +175 °C Tj Operating junction temperature range -55 to +175 °C TL Maximum lead temperature for soldering during 10 s 260 °C Figure 1. Electrical characteristics - parameter definitions Figure 2. Pulse definition for electrical characteristics DS8598 - Rev 5 page 2/13 SMC30JxxA, SMC30JxxCA Characteristics Table 2. Electrical characteristics - parameter values (Tamb = 25 °C, unless otherwise specified) Type IRM max at VRM 10 / 1000 µs VBR at IR (1) Min. (2)(3) VCL Typ. (4) IPP Max. 8 / 20µs RD (2)(3) VCL Max. Max. IPP(4) RD αT Max. Max. mA V A Ω V A Ω 10-4/°C 6.74 10 9.20 327 0.008 14.4 1610 0.005 5.7 7.05 10 10.3 291 0.011 14.7 1580 0.005 5.9 7.2 7.58 10 11.2 268 0.014 15.2 1530 0.005 6.1 8.5 9.4 9.9 1 14.4 208 0.022 18.6 1280 0.006 7.3 0.2 10 11.1 11.7 1 17 176 0.030 21.7 1170 0.008 7.8 SMC30J12A/CA 0.2 12 13.3 14 1 19.9 151 0.039 25.3 1045 0.011 8.3 SMC30J13A/CA 0.2 13 14.4 15.2 1 21.5 140 0.045 27.2 993 0.011 8.4 SMC30J15A/CA 0.2 15 16.7 17.6 1 24.4 123 0.055 32.5 926 0.015 8.8 SMC30J16A/CA 0.2 16 17.8 18.7 1 26 115 0.063 34.4 868 0.017 8.8 SMC30J18A/CA 0.2 18 20 21.1 1 29.2 103 0.079 39.3 800 0.021 9.2 SMC30J20A/CA 0.2 20 22.2 23.4 1 32.4 93 0.097 42.8 747 0.024 9.4 SMC30J22A/CA 0.2 22 24.4 25.7 1 35.5 85 0.115 48.3 701 0.030 9.6 SMC30J24A/CA 0.2 24 26.7 28.1 1 38.9 77 0.140 50.0 660 0.031 9.6 SMC30J26A/CA 0.2 26 28.9 30.4 1 42.1 71 0.165 53.5 626 0.035 9.7 SMC30J28A/CA 0.2 28 31.1 32.7 1 45.4 66 0.192 59.0 596 0.041 9.8 SMC30J30A/CA 0.2 30 33.3 35.1 1 48.4 62 0.215 64.3 569 0.048 9.9 SMC30J33A/CA 0.2 33 36.7 38.6 1 53.3 56 0.263 69.7 526 0.056 10.0 SMC30J36A/CA 0.2 36 40.0 42.1 1 58.1 48.41 0.331 76.0 503 0.063 10.0 SMC30J40A/CA 0.2 40 44.4 46.7 1 64.5 43.5 0.409 84.0 469 0.075 10.1 SMC30J48A/CA 0.2 48 53.2 56.0 1 76.6 38.0 0.542 100 409 0.101 10.3 µA V V SMC30J5.0A/CA 500 5 6.4 SMC30J6.0A/CA 500 6 6.7 SMC30J6.5A/CA 250 6.5 SMC30J8.5A/CA 10 SMC30J10A/CA 1. To calculate VBR versus Tj : VBR at Tj = VBR at 25 °C x (1 + αT x (Tj - 25)) 2. To calculate VCL versus Tj : VCL at Tj = VCL at 25 °C x (1 + αT x (Tj - 25)) 3. To calculate VCL max versus IPPappli: VCLmax = VCL - RD x (IPP - IPPappli) where IPP appli is the surge current in the application 4. Surge capability given for both directions for unidirectional and bidirectional devices DS8598 - Rev 5 page 3/13 SMC30JxxA, SMC30JxxCA Characteristics (curves) 1.1 Characteristics (curves) Figure 3. Maximum peak power dissipation versus initial junction temperature Ppp (W) 3500 Figure 4. Maximum peak pulse power versus exponential pulse duration 1000 PPP (kW) Tj initial = 25 °C 10/1000 µs 3000 VBR < 36V 100 2500 2000 VBR ≥ 36V 10 1500 1000 1 500 0 Tj (°C) 0 25 50 75 100 125 150 175 200 Figure 5. Maximum peak pulse current versus clamping voltage 10000 Ipp (A) tp (ms) 0.1 0.001 0.01 0.1 1 10 100 Figure 6. Dynamic resistance versus pulse duration 100 RD (Ω) 8/20 µs 10/1000 µs 1000 10 1 100 0.1 DS8598 - Rev 5 10 SMC30J33A/CA 1 SMC30J22A/CA 0.1 SMC30J15A/CA SMC30J5.0A/CA 1 SMC30J48A/CA 10 SMC30J48A/CA SMC30J33A/CA 0.01 SMC30J15A/CA SMC30J5.0A/CA VCL (V) 100 0.001 0.01 0.1 tp (ms) 1 10 100 page 4/13 SMC30JxxA, SMC30JxxCA Characteristics (curves) Figure 7. Junction capacitance versus reverse applied voltage (unidirectional type) C (nF) 100 Figure 8. Junction capacitance versus applied voltage (bidirectional type) C (nF) 100 f = 1 MHz Vosc = 30 mVRMS Tj = 25 °C 10 f = 1 MHz Vosc = 30 mVRMS Tj = 25 °C 10 SMC30J5.0A SMC30J5.0CA SMC30J15A SMC30J15CA SMC30J33A 1 SMC30J33CA 1 SMC30J48A 0.1 SMC30J48CA VR (V) 1 10 100 Figure 9. Leakage current versus junction temperature 100000 IR (nA) 0.1 VR (V) 1 10 100 Figure 10. Peak forward voltage drop versus peak forward current IF (A) 100 VR = VRM single pulse VRM < 10V 10000 Tj = 175 °C 10 1000 Tj = 25 °C 100 Tj = 150 °C 1 VRM ≥ 10V 10 1 Tj (°C) 25 50 75 100 125 150 175 Figure 11. Thermal impedance junction to ambient versus pulse duration 1000 Zth(j-a) (°C/W) VF (V) 0.1 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 Figure 12. Thermal resistance junction to ambient versus copper area under each lead Rth(j-a) (°C/W) 120 Single pulse on recommended footprint. Epoxy printed circuit board FR4, 70 µm Cu thickness Single pulse on recommended footprint. Epoxy printed circuit board FR4, 70 µm Cu thickness 100 100 80 60 10 40 20 1 0.01 DS8598 - Rev 5 tp (s) 0.1 1 10 100 1000 0 SCu (cm²) 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 page 5/13 SMC30JxxA, SMC30JxxCA Package information 2 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark. 2.1 SMC package information • Epoxy meets UL94, V0 Figure 13. SMC package outline E1 D E A1 A2 b C L E2 Table 3. SMC package mechanical data Dimensions Ref. DS8598 - Rev 5 Millimeters Inches (for reference only) Min. Max. Min. Max. A1 1.90 2.45 0.075 0.096 A2 0.05 0.20 0.002 0.008 b 2.90 3.20 0.114 0.126 c 0.15 0.40 0.006 0.016 D 5.55 6.25 0.218 0.246 E 7.75 8.15 0.305 0.321 E1 6.60 7.15 0.260 0.281 E2 4.40 4.70 0.173 0.185 L 0.75 1.50 0.030 0.060 page 6/13 SMC30JxxA, SMC30JxxCA SMC package information Figure 14. Footprint recommendation Figure 15. Marking layout 1.54 (0.061) 5.11 (0.201) 1.54 (0.061) 3.14 (0.124) 8.19 (0.323) millimeters (inches) Figure 16. Package orientation in reel Figure 18. 13'' reel dimension values (mm) DS8598 - Rev 5 Figure 17. Tape and reel orientation Figure 19. Inner box dimension values (mm) page 7/13 SMC30JxxA, SMC30JxxCA SMC package information Figure 20. Tape outline Table 4. Tape dimension values Dimensions Ref. DS8598 - Rev 5 Millimeters Min. Typ. Max. D0 1.4 1.5 1.6 D1 1.5 F 7.4 7.5 7.6 K0 2.39 2.49 2.59 P0 3.9 4.0 4.1 P1 7.9 8.0 8.1 P2 1.9 2.0 2.1 W 15.7 16 16.3 page 8/13 SMC30JxxA, SMC30JxxCA Reflow profile 2.2 Reflow profile Figure 21. ST ECOPACK recommended soldering reflow profile for PCB mounting 250 240-245 °C Temperature (°C) -2 °C/s 2 - 3 °C/s 60 sec (90 max) 200 -3 °C/s 150 -6 °C/s 100 0.9 °C/s 50 Time (s) 0 Note: DS8598 - Rev 5 30 60 90 120 150 180 210 240 270 300 Minimize air convection currents in the reflow oven to avoid component movement. Maximum soldering profile corresponds to the latest IPC/JEDEC J-STD-020. page 9/13 SMC30JxxA, SMC30JxxCA Ordering information 3 Ordering information Figure 22. Ordering information scheme SMC 30J xx - CA Package SMC package Power capability (10/1000 µs) 3000 W Stand-off voltage VRM Type A = unidirectional CA = bidirectional Table 5. Ordering information Order code Marking Package Weight Base qty. Delivery mode SMC30JxxA/CA(1) See Table 6. Marking SMC 0.25 g 2500 Tape and reel 1. Where xxx is nominal value of VBR and A or CA indicates unidirectional or bidirectional version. DS8598 - Rev 5 page 10/13 SMC30JxxA, SMC30JxxCA Ordering information Table 6. Marking DS8598 - Rev 5 Order code Marking Order code Marking SMC30J5.0A 3AAA SMC30J5.0CA 3BAA SMC30J6.0A 3AAB SMC30J6.0CA 3BAB SMC30J6.5A 3AAC SMC30J6.5CA 3BAC SMC30J8.5A 3AAD SMC30J8.5CA 3BAD SMC30J10A 3AAW SMC30J10CA 3BAW SMC30J12A 3AAF SMC30J12CA 3BAF SMC30J13A 3AAG SMC30J13CA 3BAG SMC30J15A 3AAH SMC30J15CA 3BAH SMC30J16A 3AAI SMC30J16CA 3BAI SMC30J18A 3AAJ SMC30J18CA 3BAJ SMC30J20A 3AAK SMC30J20CA 3BAK SMC30J22A 3AAL SMC30J22CA 3BAL SMC30J24A 3AAE SMC30J24CA 3BAE SMC30J26A 3AAM SMC30J26CA 3BAM SMC30J28A 3AAN SMC30J28CA 3BAN SMC30J30A 3AAO SMC30J30CA 3BAO SMC30J33A 3AAP SMC30J33CA 3BAP SMC30J36A 3AAQ SMC30J36CA 3BAQ SMC30J40A 3AAR SMC30J40CA 3BAR SMC30J48A 3AAS SMC30J48CA 3BAS page 11/13 SMC30JxxA, SMC30JxxCA Revision history Table 7. Document revision history Date Version 28-Jul-2011 1 Changes Initial release. Updated features on cover page. 15-Jul-2015 2 Updated Table 1, Figure 3, Figure 5, Figure 6, Figure 7, Figure 8, Figure 10 and Figure 11. Updated Table 5. DS8598 - Rev 5 22-Jul-2015 3 Updated Figure 9. 12-Nov-2019 4 Updated front page, Table 2. Electrical characteristics - parameter values (Tamb = 25 °C, unless otherwise specified) and Section 1.1 Characteristics (curves). 10-Mar-2020 5 Updated Table 2. Electrical characteristics - parameter values (Tamb = 25 °C, unless otherwise specified). page 12/13 SMC30JxxA, SMC30JxxCA IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. For additional information about ST trademarks, please refer to www.st.com/trademarks. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2020 STMicroelectronics – All rights reserved DS8598 - Rev 5 page 13/13