SMCJ10A-TR

SMCJxxA, SMCJxxCA Datasheet 1500 W TVS in SMC Features • • • • • Peak pulse power: – 1500 W (10/1000 μs) – up to 10 kW (8/20 μs) Stand-off voltage range from 5 V to 188 V Unidirectional and bidirectional types Low leakage current: 0.2 µA at 25 °C Operating Tj max: 150 °C • High power capability at Tj max.: up to 1250 W (10/1000 µs) • Lead finishing: matte tin plating Complies with the following standards • • • • • • • Product status link SMCJ SMCJ5.0A, SMCJ5.0CA, SMCJ6.0A, SMCJ6.0CA, SMCJ6.5A, SMCJ6.5CA, SMCJ8.5A, SMCJ8.5CA, SMCJ10A, SMCJ10CA, SMCJ12A, SMCJ12CA, SMCJ13A, SMCJ13CA, SMCJ15A, SMCJ15CA, SMCJ18A, SMCJ18CA, SMCJ20A, SMCJ20CA, SMCJ22A, SMCJ22CA, SMCJ24A, SMCJ24CA, SMCJ26A, SMCJ26CA, SMCJ28A, SMCJ28CA, SMCJ30A, SMCJ30CA, SMCJ33A, SMCJ33CA, SMCJ40A, SMCJ40CA, SMCJ48A, SMCJ48CA, SMCJ58A, SMCJ58CA, SMCJ70A, SMCJ70CA, SMCJ85A, SMCJ85CA, SMCJ100A, SMCJ100CA, SMCJ130A, SMCJ130CA, SMCJ154A, SMCJ154CA, SMCJ170A, SMCJ170CA, SMCJ188A, SMCJ188CA UL94, V0 J-STD-020 MSL level 1 J-STD-002, JESD 22-B102 E3 and MIL-STD-750, method 2026 JESD-201 class 2 whisker test IPC7531 footprint and JEDEC registered package outline IEC 61000-4-4 level 4: – 4kV IEC 61000-4-2, C = 150 pF, R = 330 Ω exceeds level 4: – 30 kV (air discharge) – 30 kV (contact discharge) Description The TVS series are designed to protect sensitive equipment against electrostatic discharges according to IEC 61000-4-2, MIL STD 883 Method 3015, and electrical overstress such as IEC 61000-4-4 and 5. They are used for surges below 1500 W 10/1000 μs. This planar technology makes it compatible with high-end equipment and SMPS where low leakage current and high junction temperature are required to provide reliability and stability over time. DS1284 - Rev 11 - December 2020 For further information contact your local STMicroelectronics sales office. www.st.com SMCJxxA, SMCJxxCA Characteristics 1 Characteristics Table 1. Absolute maximum ratings (Tamb = 25 °C) Symbol Parameter Value Unit Contact discharge 30 kV Air discharge 30 IEC 61000-4-2 (C = 150 pF, R = 330 Ω) VPP Peak pulse voltage PPP Peak pulse power dissipation Tstg Tj initial = Tamb 1500 W Storage temperature range -65 to +150 °C Tj Operating junction temperature range -55 to +150 °C TL Maximum lead temperature for soldering during 10 s 260 °C Figure 1. Electrical characteristics - parameter definitions Figure 2. Pulse definition for electrical characteristics DS1284 - Rev 11 page 2/12 SMCJxxA, SMCJxxCA Characteristics Table 2. Electrical characteristics - parameter values (Tamb = 25 °C, unless otherwise specified) IRM max at VRM Type 25 °C 85 °C µA 10 / 1000 µs VBR at IR (1) Min. V VCL Typ. V (2)(3) (4) IPP Max. 8 / 20µs RD VCL (2)(3) Max. Max. IPP(4) RD αT Max. Max. mA V A Ω V A mΩ 10-4/°C SMCJ5.0A/CA 500 2000 5 6.4 6.74 10 9.20 171 0.012 13.4 746 8.5 5.7 SMCJ6.0A/CA 500 2000 6 6.7 7.05 10 10.3 152 0.019 13.7 730 8.6 5.9 SMCJ6.5A/CA 250 1000 6.5 7.2 7.58 10 11.2 140 0.023 14.5 690 9.5 6.1 SMCJ8.5A/CA 10 50 8.5 9.4 9.9 1 14.4 105 0.038 19.5 512 18 7.3 SMCJ10A/CA 0.2 1 10 11.1 11.7 1 17 92 0.051 21.7 461 20 7.8 SMCJ12A/CA 0.2 1 12 13.3 14 1 19.9 79 0.066 25.3 394 27 8.3 SMCJ13A/CA 0.2 1 13 14.4 15.2 1 21.5 73 0.076 27.2 368 31 8.4 SMCJ15A/CA 0.2 1 15 16.7 17.6 1 24.4 64 0.092 32.5 308 46 8.8 SMCJ18A/CA 0.2 1 18 20 21.1 1 29.2 53 0.133 39.3 254 68 9.2 SMCJ20A/CA 0.2 1 20 22.2 23.4 1 32.4 48 0.163 42.8 234 78 9.4 SMCJ22A/CA 0.2 1 22 24.4 25.7 1 35.5 44 0.194 48.3 207 103 9.6 SMCJ24A/CA 0.2 1 24 26.7 28.1 1 38.9 40 0.235 50 200 102 9.6 SMCJ26A/CA 0.2 1 26 28.9 30.4 1 42.1 37 0.275 53.5 187 115 9.7 SMCJ28A/CA 0.2 1 28 31.1 32.7 1 45.4 34 0.325 59 169 146 9.8 SMCJ30A/CA 0.2 1 30 33.3 35.1 1 48.4 32 0.361 64.3 156 176 9.9 SMCJ33A/CA 0.2 1 33 36.7 38.6 1 53.3 29 0.440 69.7 143 204 10.0 SMCJ40A/CA 0.2 1 40 44.4 46.7 1 64.5 24 0.644 84 119 294 10.1 SMCJ48A/CA 0.2 1 48 53.3 56.1 77.4 20 0.925 100 100 411 10.3 SMCJ58A/CA 0.2 1 58 64.4 67.8 1 93.6 16 1.40 121 83 600 10.4 SMCJ70A/CA 0.2 1 70 77.8 81.9 1 113 13.9 1.94 146 69 870 10.5 SMCJ85A/CA 0.2 1 85 94 99 1 137 11.5 2.87 178 56 1322 10.6 SMCJ100A/CA 0.2 1 100 111 117 1 162 9.7 4.04 212 47 1897 10.7 SMCJ130A/CA 0.2 1 130 144 152 1 209 7.5 6.59 265 38 2774 10.8 SMCJ154A/CA 0.2 1 154 171 180 1 246 6.1 9.34 317 31.5 4063 10.8 SMCJ170A/CA 0.2 1 170 189 199 1 274 5.5 11.8 353 28 5145 10.8 SMCJ188A/CA 0.2 1 188 209 220 1 328 4.6 21.1 388 26 6038 10.8 1. To calculate VBR versus Tj : VBR at Tj = VBR at 25 °C x (1 + αT x (Tj - 25)) 2. To calculate VCL versus Tj : VCL at Tj = VCL at 25 °C x (1 + αT x (Tj - 25)) 3. To calculate VCL max versus IPPappli: VCLmax = VCL - RD x (IPP - IPPappli) where IPP appli is the surge current in the application 4. Surge capability given for both directions for unidirectional and bidirectional devices DS1284 - Rev 11 page 3/12 SMCJxxA, SMCJxxCA Characteristics (curves) 1.1 Characteristics curves Figure 3. Maximum peak power dissipation versus initial junction temperature Ppp (W) 2000 Figure 4. Maximum peak pulse power versus exponential pulse duration PPP (W) 100000 Tj initial = 25 °C 10/1000 µs 1500 10000 1000 1000 500 0 Tj (°C) 0 25 50 75 100 125 150 175 Figure 5. Maximum peak pulse current versus clamping voltage 10000 Ipp (A) tp (ms) 100 0.001 0.01 0.1 1 10 100 Figure 6. Dynamic resistance versus pulse duration 1000 RD (Ω) 8/20 µs 100 10/1000 µs 1000 10 SMCJ188A/CA 100 1 SMCJ40A/CA 10 0.1 100 SMCJ188A/CA SMCJ85A/CA SMCJ40A/CA DS1284 - Rev 11 10 SMCJ24A/CA 1 SMCJ12A/CA SMCJ5.0A/CA 1 0.1 SMCJ85A/CA SMCJ24A/CA 0.01 SMCJ12A/CA SMCJ5.0A/CA V CL (V) 1000 0.001 0.01 0.1 tp (ms) 1 10 100 page 4/12 SMCJxxA, SMCJxxCA Characteristics (curves) Figure 7. Junction capacitance versus applied voltage (unidirectional type) C (nF) 10 Figure 8. Junction capacitance versus applied voltage (bidirectional type) C (nF) 10 f = 1 MHz Vosc = 30 mVRMS Tj = 25°C SMCJ5.0A f = 1 MHz Vosc = 30 mVRMS Tj = 25°C SMCJ5.0CA SMCJ12A SMCJ12CA 1 1 SMCJ24A SMCJ24CA SMCJ40CA SMCJ40A SMCJ85A 0.1 SMCJ85CA 0.1 SMCJ188CA SMCJ188A 0.01 VR (V) 1 10 100 1000 Figure 9. Leakage current versus junction temperature IR (nA) 10000 0.01 VR (V) 1 100 1000 Figure 10. Peak forward voltage drop versus peak forward current IF (A) 100 VR =VRM 10 single pulse 1000 VRM < 10V 10 Tj = 125 °C 100 Tj = 25 °C 1 1 VRM ≥ 10V 10 Tj (°C) 25 50 75 100 125 150 Figure 11. Thermal impedance junction to ambient versus pulse duration 1000 Zth(j-a) (°C/W) VF (V) 0 0 0.5 1 1.5 2 2.5 3 Figure 12. Thermal resistance junction to ambient versus copper area under each lead Rth(j-a) (°C/W) 120 Single pulse on recommended footprint. Epoxy printed circuit board FR4, 70 µm Cu thickness Single pulse on recommended footprint. Epoxy printed circuit board FR4, 70 µm Cu thickness 100 100 80 60 10 40 20 1 0.01 DS1284 - Rev 11 tp (s) 0.1 1 10 100 1000 0 SCu (cm²) 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 page 5/12 SMCJxxA, SMCJxxCA Package information 2 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark. 2.1 SMC package information • Epoxy meets UL94, V0 Figure 13. SMC package outline E1 D E A1 A2 b C L E2 Table 3. SMC package mechanical data Dimensions Millimeters Ref. DS1284 - Rev 11 Inches (for reference only) Min. Max. Min. Max. A1 1.90 2.45 0.075 0.096 A2 0.05 0.20 0.002 0.008 b 2.90 3.20 0.114 0.126 c 0.15 0.40 0.006 0.016 D 5.55 6.25 0.218 0.246 E 7.75 8.15 0.305 0.321 E1 6.60 7.15 0.260 0.281 E2 4.40 4.70 0.173 0.185 L 0.75 1.50 0.030 0.060 page 6/12 SMCJxxA, SMCJxxCA SMC package information Figure 14. Footprint recommendation Figure 15. Marking layout 1.54 (0.061) 5.11 (0.201) 1.54 (0.061) 3.14 (0.124) 8.19 (0.323) millimeters (inches) Figure 16. Package orientation in reel Figure 18. 13'' reel dimension values (mm) DS1284 - Rev 11 Figure 17. Tape and reel orientation Figure 19. Inner box dimension values (mm) page 7/12 SMCJxxA, SMCJxxCA SMC package information Figure 20. Tape outline Table 4. Tape dimension values Dimensions Millimeters Ref. DS1284 - Rev 11 Min. Typ. Max. D0 1.4 1.5 1.6 D1 1.5 F 7.4 7.5 7.6 K0 2.39 2.49 2.59 P0 3.9 4.0 4.1 P1 7.9 8.0 8.1 P2 1.9 2.0 2.1 W 15.7 16 16.3 page 8/12 SMCJxxA, SMCJxxCA Reflow profile 2.2 Reflow profile Figure 21. ST ECOPACK recommended soldering reflow profile for PCB mounting 250 240-245 °C Temperature (°C) -2 °C/s 2 - 3 °C/s 60 sec (90 max) 200 -3 °C/s 150 -6 °C/s 100 0.9 °C/s 50 Time (s) 0 Note: DS1284 - Rev 11 30 60 90 120 150 180 210 240 270 300 Minimize air convection currents in the reflow oven to avoid component movement. Maximum soldering profile corresponds to the latest IPC/JEDEC J-STD-020. page 9/12 SMCJxxA, SMCJxxCA Ordering information 3 Ordering information Table 5. Ordering information Order code Marking Package Weight Base qty. Delivery mode SMCJxxA/CA-TR(1) See Table 6. Marking SMC 0.25 g 2500 Tape and reel 1. Where xxx is nominal value of VBR and A or CA indicates unidirectional or bidirectional version. Table 6. Marking DS1284 - Rev 11 Order code Marking Order code Marking SMCJ5.0A-TR FUA SMCJ5.0CA-TR FBA SMCJ6.0A-TR FUB SMCJ6.0CA-TR FBB SMCJ6.5A-TR FUC SMCJ6.5CA-TR FBC SMCJ8.5A-TR FUD SMCJ8.5CA-TR FBD SMCJ10A-TR FUF SMCJ10CA-TR FBF SMCJ12A-TR FUH SMCJ12CA-TR FBH SMCJ13A-TR FUI SMCJ13CA-TR FBI SMCJ15A-TR FUJ SMCJ15CA-TR FBJ SMCJ18A-TR FUL SMCJ18CA-TR FBL SMCJ20A-TR FUM SMCJ20CA-TR FBM SMCJ22A-TR FUN SMCJ22CA-TR FBN SMCJ24A-TR FUO SMCJ24CA-TR FBO SMCJ26A-TR FUP SMCJ26CA-TR FBP SMCJ28A-TR FUQ SMCJ28CA-TR FBQ SMCJ30A-TR FUR SMCJ30CA-TR FBR SMCJ33A-TR FUS SMCJ33CA-TR FBS SMCJ40A-TR FUU SMCJ40CA-TR FBU SMCJ48A-TR FUW SMCJ48CA-TR FBW SMCJ58A-TR FUZ SMCJ58CA-TR FBZ SMCJ70A-TR GUB SMCJ70CA-TR GBB SMCJ85A-TR GUE SMCJ85CA-TR GBE SMCJ100A-TR GUG SMCJ100CA-TR GBG SMCJ130A-TR GUI SMCJ130CA-TR GBI SMCJ154A-TR GUL SMCJ154CA-TR GBL SMCJ170A-TR GUM SMCJ170CA-TR GBM SMCJ188A-TR GUN SMCJ188CA-TR GBN page 10/12 SMCJxxA, SMCJxxCA Revision history Table 7. Document revision history Date Version Changes August-1999 5 Previous update. 14-May-2009 6 Reformatted to current standards. Updated ECOPACK statement. 17-Sep-2009 7 Document updated for low leakage current. 12-Jul-2010 8 Changed timescale in Figure 9. 03-Feb-2020 9 12-Mar-2020 10 14-Dec-2020 11 Minor text changes to improve readability. DS1284 - Rev 11 Updated Table 2. Electrical characteristics - parameter values (Tamb = 25 °C, unless otherwise specified) and Section 1.1 Characteristics (curves). Updated title of the document. Removed section 3. Application and design guidelines. Updated Table 2. page 11/12 SMCJxxA, SMCJxxCA IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. For additional information about ST trademarks, please refer to www.st.com/trademarks. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2020 STMicroelectronics – All rights reserved DS1284 - Rev 11 page 12/12