SPC560P-DISP

SPC56P-Discovery SPC560P-DISP: Discovery+ evaluation board Data brief Description The SPC560P-DISP Discovery+ kit helps to discover SPC560 P line Power Architecture Microcontrollers with full access to CPUs, GPI/O's and peripherals such as CAN, JTAG, K-Line, LIN at budget price. Dedicated connectors allow plugging Arduino shields (Arduino-compatible). Free ready-to-run application firmware examples are available inside SPC5Studio (www.st.com/spc5studio) to support quick evaluation and development. Features  SPC560P50L5 32-bit 64MHz e200z0h CPU;32-bit Power Architecture® Technology CPU, 576 KB Flash in an LQFP144 package.  Shield Connectors (Arduino compatible).  On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers (2 x 7 male 100mil connector).  Free 128 Kbyte code size limited debugging  Board power supply: from the USB bus (5 V supply voltage) or through external +12 V PSU.  All GPIOs and DSPI/USB signals accessible by a 4x37 100mil pin grid array allowing connection of an additional boards for dedicated applications. SPC5Studio includes visual configurable code generation engine, board support package (BSP), start-up routines, interrupt services, free RTOS (optional) and a full set of low level drivers. SPC5Studio includes HighTec GNU "C" compiler, with a 30-days full free trial support. SPC5Studio is available for free download. The SPC560 P line is designed to address cost sensitive chassis, airbag, electrical hydraulic power steering (EHPS), electric power steering (EPS), and electrical motor control applications. An E2E Community is available on ST WEB. Table 1. Device summary Order code SPC560P-DISP  CAN, K-LINE, LIN, FlexRay interfaces. Reference SPC56P DISCOVERY+ with SPC560P50L5  Main power switch.  Reset push button.  2 potentiometers for ADC evaluation  12 MHz crystal.  Board size 152 x 103 mm August 2018 DB2227 Rev 3 For further information contact your local STMicroelectronics sales office. 1/6 www.st.com Contents SPC56P-Discovery Contents 1 2 2/6 System requirements, HW and SW resources . . . . . . . . . . . . . . . . . . . . 4 1.1 System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1.2 Development toolchain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1.3 Demonstration software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 DB2227 Rev 3 SPC56P-Discovery List of tables List of tables Table 1. Table 2. Device summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 DB2227 Rev 3 3/6 3 System requirements, HW and SW resources SPC56P-Discovery 1 System requirements, HW and SW resources 1.1 System requirements 1.2 1.3  Windows PC (Windows XP, Windows 7)  PSU: Input 100-240Vac (EU plug). Output 12V-2A Development toolchain  SPC5Studio (includes Hightec compiler, with 1 year full free trial support)  SPC5-UDESTK-SW (free 256 Kbyte code size limited PLS USB/JTAG debugging software for SPC5 MCUs) Demonstration software Demonstration software is preloaded in the MCU flash memory for easy demonstration of the SPC560P50L5 in stand-alone mode. 4/6 DB2227 Rev 3 SPC56P-Discovery 2 Revision history Revision history Table 2. Revision history Date Revision Changes 19-Feb-2014 1 Initial release. 19-Mar-2014 2 Updated Description. 01-Aug-2018 3 Updated Section 1.1: System requirements. Minor text changes. DB2227 Rev 3 5/6 5 SPC56P-Discovery IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2018 STMicroelectronics – All rights reserved 6/6 DB2227 Rev 3