SPC56EL70L5DISP

SPC56L-Discovery SPC56EL70L5DISP: Discovery+ evaluation board Data brief Description The SPC56xL Discovery+ kit helps you to discover SPC56L line Power Architecture® Microcontrollers with full access to CPUs, I/O signals and peripherals such as CAN, UART, FlexRay, JTAG, K-Line, LIN at budget price. Free ready-to-run application firmware examples are available on www.st.com/SPC56Ldiscovery and inside SPC5Studio (www.st.com/spc5studio) to support quick evaluation and development. Features  Board Supply: Single 12 VDC external power supply input. Two regulators provide power voltages 5 V and 3.3 V.  Main power switch and three power supply status LEDs (+12 V, +5 V and +3.3 V)  All MCU signals accessible by a 37 x 4 100 mil pin grid array allowing connection of an additional board for dedicated applications.  JTAG interface (7 x 2 male 100 mil connector)  Two FlexRay channels with jumper enable and DB9 male connector. SPC5studio includes visual configurable code generation engine, board support package (BSP), startup routines, interrupt services, free RTOS (optional) and a full set of low level drivers. SPC5Studio includes Hightec GNU "C" compiler, with a 30-days full free trial license. SPC5Studio is available for free download. The SPC56xL family is designed to address all Automotive Applications but as well industrial safety oriented applications. The SPC56xL devices featured specific functions to make the design of ASIL D/SIL-3 applications easier. An E2E Community is available on ST WEB: https://my.st.com/public/STe2ecommunities/mcu.  Two CAN channels with jumper enable and DB9 male connector Table 1. Device summary Order code  K-Line interface.  Two LIN interfaces (HW configurable) SPC56EL70L5DISP  Two potentiometers for analog voltage input Reference SPC56xL DISCOVERY+ with SPC56EL70L5  Three user LEDs.  40 MHz crystal.  Reset push button.  Specification: – Board size 115 x 135mm – 12 VDC center positive, 2.1 mm inner diameter. August 2018 DB2005 Rev 3 For further information contact your local STMicroelectronics sales office. 1/4 www.st.com 1 System requirements, HW and SW resources SPC56L-Discovery 1 System requirements, HW and SW resources 1.1 System requirements 1.2 1.3  Windows PC (2000, XP, Vista)  PSU: Input 100-240 Vac (EU plug). Output 12V-2A Development toolchain  SPC5Studio (includes Hightec GNU "C" compiler, with a 30-days full free trial license)  SPC5-UDESTK Demonstration software Demonstration software is preloaded in the MCU flash memory for easy demonstration of the SPC56EL70L5 in stand-alone mode. For more information and to download the latest version available, please refer to www.st.com/SPC56Ldiscovery and www.st.com/spc5studio. 2/4 DB2005 Rev 3 SPC56L-Discovery 2 Revision history Revision history Table 2. Revision history Date Revision Changes 31-Jul-2013 1 Initial release. 25-Sep-2013 2 Updated Disclaimer. 01-Aug-2018 3 Updated Section 1.2: Development toolchain. Minor text changes. DB2005 Rev 3 3/4 SPC56L-Discovery IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2018 STMicroelectronics – All rights reserved 4/4 DB2005 Rev 3