ST1510FX

ST1510FX Datasheet High voltage fast-switching NPN Power transistor Features • 1 2 3 TO-3PF • • • State-of-the-art technology: – Diffused collector “Enhanced generation” EHVS1 More stable performances versus operating temperature variation Low base-drive requirements Tighter hFE range at operating collector current • • Fully insulated power package UL compliant In compliance with the 2002/93/EC European directive Application • • Electronic ballast for fluorescent lighting Switch mode power supplies Description The device is manufactured using Diffused Collector in Planar technology adopting new and enhanced high voltage structure 1 (EHVS1). Product status link ST1510FX Product summary Order code ST1510FX Marking 1510FX Package TO-3PF Packing Tube DS4900 - Rev 3 - November 2020 For further information contact your local STMicroelectronics sales office. www.st.com ST1510FX Electrical ratings 1 Electrical ratings Tcase = 25°C unless otherwise specified. Table 1. Electrical characteristics Symbol Parameter Value Unit VCES Collector-emitter voltage (VBE = 0 V) 1500 V VCEO Collector-emitter voltage (IB = 0 A) 750 V VEBO Collector-base voltage (IC = 0 A) 9 V Collector current 12 A Collector peak current (tP < 5 ms) 20 A Base current 6 A PTOT Total power dissipation at Tc = 25°C 62 W Visol Insulation withstand voltage (RMS) from all three leads to external heat sink 2.5 kV Tstg Storage temperature IC ICM IB TJ -65 to 150 Max. operating junction temperature 150 °C Table 2. Thermal data Symbol DS4900 - Rev 3 Parameter Value Unit Rthj-case Thermal resistance junction-case 2 °C/W Rthj-amb Thermal resistance junction-ambient 50 °C/W page 2/11 ST1510FX Electrical characteristics 2 Electrical characteristics Tcase = 25°C unless otherwise specified. Table 3. Electrical characteristics Symbol Parameter Test conditions Min. Typ. VCE = 1500 V ICES Collector cut-off current Emitter cut-off current mA VCE = 1500 V TC = 125°C 2 VEB = 9 V 1 IC = 0 A IC = 100 mA Unit 0.2 VBE = 0 V VBE = 0 V (1) IEBO Max. mA VCEO(sus) (2) Collector-emitter sustaining voltage VCE(sat) (2) Collector-emitter saturation voltage IC = 6 A IB = 1.5 A 2 V VBE(sat) (2) Base-emitter saturation voltage IC = 6 A IB = 1.5 A 1.1 V hFE (2) DC current gain IB = 0 A 750 IC = 1 A VCE = 5 V 15 IC = 6 A VCE = 5 V 6.5 IC = 7 A VCE = 1V Inductive load IC = 6 A, IB(on) = 1.2 A, ts Storage time IB(off) = -2.4 A, L = 500 μH, tf Fall time Vclamp = 350 V V 28 9.5 5.5 2 0.2 μs 1. Defined by design, not subject to production test. 2. Pulsed: Pulse duration = 300 ms, duty cycle 1.5%. DS4900 - Rev 3 page 3/11 ST1510FX Electrical characteristics (curves) 2.1 Electrical characteristics (curves) Figure 1. Safe operating area Figure 2. Derating curve Figure 3. Output characteristics Figure 4. Reverse biased SOA Figure 5. DC current gain at VCE = 1 V Figure 6. DC current gain at VCE = 5 V DS4900 - Rev 3 page 4/11 ST1510FX Electrical characteristics (curves) Figure 7. Collector emitter saturation voltage DS4900 - Rev 3 Figure 8. Base emitter saturation voltage page 5/11 ST1510FX Test circuits 3 Test circuits Figure 9. Power losses and inductive load switching DS4900 - Rev 3 Figure 10. Reverse biased safe operating area page 6/11 ST1510FX Package information 4 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark. 4.1 TO-3PF package information Figure 11. TO-3PF package outline 7627132_6 DS4900 - Rev 3 page 7/11 ST1510FX TO-3PF package information Table 4. TO-3PF mechanical data Dim. mm Min. Max. A 5.30 5.70 C 2.80 3.20 D 3.10 3.50 D1 1.80 2.20 E 0.80 1.10 F 0.65 0.95 F2 1.80 2.20 G 10.30 11.50 G1 DS4900 - Rev 3 Typ. 5.45 H 15.30 15.70 L 9.80 L2 22.80 23.20 L3 26.30 26.70 L4 43.20 44.40 L5 4.30 4.70 L6 24.30 24.70 L7 14.60 15.00 N 1.80 2.20 R 3.80 4.20 Dia 3.40 3.80 10.00 10.20 page 8/11 ST1510FX Revision history Table 5. Document revision history DS4900 - Rev 3 Date Version Changes 02-Nov-2005 1 Initial release. 23-Feb-2007 2 Order code and parameters on Table1 has been change. 12-Nov-2020 3 Updated Section 4 Package information. Minor text changes. page 9/11 ST1510FX Contents Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 2 Electrical characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.1 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 4 Package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 4.1 TO-3PF package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 DS4900 - Rev 3 page 10/11 ST1510FX IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. For additional information about ST trademarks, please refer to www.st.com/trademarks. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2020 STMicroelectronics – All rights reserved DS4900 - Rev 3 page 11/11