ST1802FX

ST1802FX HIGH VOLTAGE FAST - SWITCHING NPN POWER TRANSISTOR Features ■ NEW SERIES, ENHANCED PERFORMANCE ■ FULLY INSULATED POWER PACKAGE (U.L. COMPLIANT) FOR EASY MOUNTING ■ HIGH VOLTAGE CAPABILITY (>1500V) ■ HIGH SWITCHING SPEED ■ TIGTHER hFE CONTROL ■ IMPROVED RUGGEDNESS ■ IN COMPLIANCE WITH THE 2002/93/EC EUROPEAN DIRECTIVE ISOWATT218FX Applications ■ HORIZONTAL DEFLECTION OUTPUT FOR COLOR TV UP TO 29-INCHES Internal Schematic Diagram Description The ST1802FX is manufactured using new Diffused Collector Technology for more stable operation Vs base drive circuit variations resulting in very low worst case dissipation. Order codes Part Number Marking Package Packing ST1802FX 1802FX ISOWATT218FX TUBE October 2005 Rev 1 1/10 www.st.com 10 ST1802FX 1 Electrical Ratings 1 Electrical Ratings Table 1. Absolute Maximum Rating Symbol Parameter Value Unit VCBO Collector-Base Voltage (IE = 0) 1500 V VCEO Collector-Emitter Voltage (IB = 0) 600 V VEBO Collector-Base Voltage (IC = 0) 7 V Collector Current 10 A Collector Peak Current (tP < 5ms) 15 A Base Current 4 A PTOT Total dissipation at Tc = 25°C 60 W Visol Insulation Withstand Voltage (RMS) from all three Leads to External Heatsink 2500 V Tstg Storage Temperature TJ -65 to 150 150 °C Max. Operating Junction Temperature Value Unit 2.1 °C/W IC ICM IB Table 2. Symbol Rthj-case 2/10 Thermal Data Parameter Thermal Resistance Junction-Case ____________________Max ST1802FX 2 2 Electrical Characteristics Electrical Characteristics (TCASE = 25°C; unless otherwise specified) Table 3. Symbol Electrical Characteristics Parameter ICES Collector Cut-off Current (V BE = 0) IEBO Emitter Cut-off Current (IC = 0) VCEO(sus) Collector-Emitter Sustaining Note 1) Voltage (IB = 0) VCE(sat) Note 1 VBE(sat) Note 1 hFE ts tf Collector-Emitter Saturation Voltage Test Conditions INDUCTIVE LOAD Storage Time Fall Time Typ. VCE = 1500V VCE = 1500V Tc= 125°C VEB = 7V IC = 700 mA L = 25 mH Max. Unit 1 2 mA mA 1 mA 600 V IC = 4 A IB = 0.8 A IC = 4 A IB = 1.2 A 5 1.5 V V IB = 1 A 1.2 V Base-Emitter Saturation Voltage IC = 4.5 A DC Current Gain Min. IC = 1 A VCE = 5 V IC = 5 A VCE = 1 V IC = 5 A VCE = 5 V IC = 4A ___ _ _ 4 9 fh = 16KHz IBon(END) = 850mA VBB(off) = -2.5V 25 4.5 LB = 4.5μH 2.6 0.2 4 0.6 μs μs 1 Pulsed duration = 300 μs, duty cycle ≤1.5%. 3/10 ST1802FX 2 Electrical Characteristics 2.1 Electrical Characteristics (curves)) Figure 1. Safe Operating Area Figure 3. Collector-emitter saturation voltage Figure 4. Base-emitter saturation voltage Figure 5. DC current gain DC current gain 4/10 Figure 2. Figure 6. Thermal Impedance ST1802FX 2 Electrical Characteristics Figure 7. Power losses at 16KHz Figure 9. Reverse biased area Figure 8. Switching time inductive load 5/10 3 Test Circuit 3 Test Circuit Figure 10. Inductive load switching test circuit 6/10 ST1802FX ST1802FX 4 4 Package Mechanical Data Package Mechanical Data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 7/10 ST1802FX 4 Package Mechanical Data ISOWATT218FX MECHANICAL DATA DIM. A C D D1 E F F2 G G1 H L L2 L3 L4 L5 L6 L7 N R Dia MIN. 5.30 2.80 3.10 1.80 0.80 0.65 1.80 10.30 mm. TYP MAX. 5.70 3.20 3.50 2.20 1.10 0.95 2.20 11.50 5.45 15.30 9 22.80 26.30 43.20 4.30 24.30 14.60 1.80 3.80 3.40 15.70 10.20 23.20 26.70 44.40 4.70 24.70 15 2.20 4.20 3.80 7627132 B 8/10 ST1802FX 5 5 Revision History Revision History Date Revision 18-Oct-2005 1 Changes First release 9/10 ST1802FX 5 Revision History Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners © 2005 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 10/10