ST62E6XC-EPB/US

ST6-EPB ST6 EPROM programmers Data brief Features ■ Programming of ST6 devices with EPROM or OTP memory ■ Dedicated EPB for each ST6 microcontroller family with support for all corresponding packages ■ In-situ programming ■ Parallel or serial connection to host PC ■ The EPB programming boards are delivered in a complete package that includes: – Programming board with complete range of sockets – Power supply – Parallel or 25-pin serial cable for host PC interface – Software tools on CD-ROM ) (s u d o r P e t e l o s b O t c u Description d o r The ST6-EPB programming board is designed for single-site programming of EPROM or OTP ST6 microcontrollers. P e The ST6-EPB supports two operating modes, either in standalone mode, or whilst connected to a PC. let o s b ) s ( ct In standalone mode, microcontrollers can be programmed by simple key operation. The programmer also supports Blank-check and Verify tests in standalone mode. O Table 1. Part number ST6-EPB The ST6-EPB can be also connected via a serial or parallel interface to a host PC running the ST6 Windows EEPROMER (WINEE software). The ST6 EPROM offers Read, Program, Verify and Blank-check features along with many other functions. October 2010 Doc ID 18050 Rev 1 For further information contact your local STMicroelectronics sales office. Device summary Reference – ST62E2XC-EPB for ST62E0x/T0x/E1x/T1x/E2x/T2x devices – ST62E3X-EPB for ST62E3x/T3x devices – ST62E4XB-EPB for ST62E4x/T4x devices – ST62E6XC-EPB for ST62E5x/T5x/E6x/T6x devices 1/3 www.st.com 3 ST6-EPB Revision history Table 2. Document revision history Date Revision 22-Oct-2010 1 Changes Initial release. ) s ( ct u d o r P e t e l o ) (s s b O t c u d o r P e t e l o s b O 2/3 Doc ID 18050 Rev 1 ST6-EPB ) s ( ct Please Read Carefully: u d o Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. r P e All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. t e l o No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. ) (s s b O UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. t c u UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. d o r P e t e l o Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. s b O ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2010 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com Doc ID 18050 Rev 1 3/3