ST7DALI-EVAL

ST7DALI-EVAL ST7DALI-EVAL evaluation kit Data brief Features ■ Master board with: – preprogrammed ST72334x – power supply – serial port for host PC connection ■ 2 slave boards with: – preprogrammed ST7DALI microcontrollers implementing the DALI communication interface – 1 to 10 V output (standard dimmable ballast input) – 12 V power supply connector ■ Software CD-ROM for installation of the lighting control interface software Description The ST7DALI-EVAL evaluation kit provides a complete evaluation and demonstration platform for the on-chip lighting control features of the ST7DALI device. The ST7DALI devices integrate the DALI Communication Module (DCM) for serial communication with controllable electronic ballasts, which provide the required starting voltage and operating current for fluorescent, mercury and other electric-discharge lamps. When developers are ready to create their own applications, the kit serves as a reference design for a DALI gateway topology. Table 1. Device summary Order code ST7DALI-EVAL Reference ST7DALI evaluation kit The DCM uses IEC standard DALI (Digital Addressable Lighting Interface) communications (based on the bi-phase Manchester asynchronous serial data format). To help developers implement the ST7DALI to control lighting networks, the ST7DALI-EVAL provides a complete software/hardware application for networking up to 64 ST7DALIbased lighting control slave boards and testing the various DALI lighting control commands from an easy-to-use, PC-based software interface. November 2010 Doc ID 18072 Rev 1 For further information contact your local STMicroelectronics sales office. 1/3 www.st.com 3 ST7DALI-EVAL Revision history Table 2. 2/3 Document revision history Date Revision 22-Nov-2010 1 Changes Initial release. Doc ID 18072 Rev 1 ST7DALI-EVAL Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2010 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com Doc ID 18072 Rev 1 3/3