ST7MDT10-DVP3

ST7MDT10-16/DVP DIP16/SO16 Connection Kit for ST7MDT10-DVP3 DATA BRIEF The DIP16/SO16 Connection Kit (ST7MDT1016/DVP) provides the hardware you need to connect your ST7MDT10-DVP3 emulator to your application when debugging applications for ST7 microcontrollers in DIP16 and SO16 packages. Figure 2. DIP16 application board connection ) s ( ct Connection Kit Contents ■ DIP16/SO16 device adapter (DB587) – Allows the connection of your ST7MDT10-DVP3 emulator to your application board in place of your ST7 in DIP16 or SO16 package. u d o r P e 2. Remove the SO16 adapter 3. Plug flat cable into the J1 Pin 1 Indicators t e l o connector on the adapter This adapter is provided by default when ordering the ST7MDT10-DVP3 emulator (ordering code: ST7MDT10-DVP3) and the ST7MDT10-DVP3 target emulation board (ST7MDT10-TEB/DVP). The 34-pin flat cable for connection between the emulator and adapter is provided with your ST7MDT10-DVP3 emulator. ) (s t c u For more information... d ro ■ ST7-DVP3 User Manual – Information common to all DVP3 series emulators ■ ST7MDT10-DVP3 Probe User Guide – Information specific to ST7MDT10-DVP3 s b O s b O insert the pins of the DIP16 adapter into the socket on the application board. 1. Solder socket to application board. Figure 3. SO16 application board connection P e t e l o Figure 1. 4. Align pin 1 indicators, then DIP16/SO16 device adapter (DB587) For SO16 connection 2. Plug flat cable into the J1 connector on the adapter Pin 1 Indicators 3. Align pin 1 indicators, then insert the SO16 connection pins into the corresponding connector on the device adapter. 1. Solder SO16 connection pins to application board. October 2005 Rev 1 1/3 www.st.com 3 ST7MDT10-16/DVP Revision history Date Revision 12-October-2005 1 Changes Initial release. ) s ( ct u d o r P e t e l o ) (s d t c u e t e ol s b O 2/3 o r P s b O ST7MDT10-16/DVP ) s ( ct u d o r P e t e l o ) (s s b O t c u d e t e ol o r P s b O Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners © 2005 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 3/3