ST7MDT20-T64/DVP

ST7MDT20-T64/DVP TQFP64 (14x14) Connection Kit for ST7MDT20-DVP3 DATA BRIEF The TQFP64 (14x14) Connection Kit (ST7 MDT20-T64/DVP) provides the hardware you need to connect your ST7MDT20-DVP3 emulator to your application when debugging applications for ST7 microcontrollers in the TQFP64 (14x14) package. Figure 2. TQFP64 device adapter (DB543) ) s ( ct u d o Connection Kit Contents ■ One additional 50-pin flat cable required for connection between emulator and the adapter. ■ TQFP80/64/44 adapter (DB530) – Allows the connection of your ST7MDT20-DVP3 emulator to your application board in place of your ST7. ■ TQFP64 (14x14) device adapter (DB543) – Adapts the emulator connection to the package of your ST7. ■ CAB TQFP64 (14x14) socket and cover (CAB 3303262 and CAB 3303307) – solders to your application board to allow connection of the emulator or installation of your ST7. r P e t e l o bs Figure 3. Connection to application board O ) s ( t c u d For more information... o r P e t e l o s b O ■ ST7-DVP3 User Manual – Information common to all DVP3 series emulators ■ ST7MDT20-DVP3 Probe User Guide – Information specific to ST7MDT20-DVP3 Figure 1. Orientation Indicators 3. Plug flat cables into the corresponding connectors J1 and J2 on the adapter 4. Plug the W1 and W2 connectors on the adapter into the corresponding connectors on the device adapter. Flat cable and adapter Pin 1 Indicators TQFP 80/64/44 Adapter (DB530) 2. Align pin 1 indicators, then secure the device adapter to the socket. 1. Solder socket to Additional 50-pin flat cable October 2005 application board. Rev 1 1/3 www.st.com 3 ST7MDT20-T64/DVP Revision history Date Revision 10-October-2005 1 Changes Initial release. ) s ( ct u d o r P e t e l o ) (s d t c u e t e ol s b O 2/3 o r P s b O ST7MDT20-T64/DVP ) s ( ct u d o r P e t e l o ) (s s b O t c u d e t e ol o r P s b O Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners © 2005 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 3/3