ST7MDT25-T32/DVP

ST7MDT25-T32/DVP TQFP32 (7x7) Connection Kit for ST7MDT25-DVP3 DATA BRIEF The TQFP32 (7x7) Connection Kit (ST7MDT25T32/DVP) provides the hardware you need to connect your ST7MDT25-DVP3 emulator to your application when debugging applications for ST7 microcontrollers in the TQFP32 (7x7) package. Figure 2. TQFP32 device adapter (DB522) ) s ( ct Connection Kit Contents ■ TQFP32 adapter (DB615) – Allows the connection of your ST7MDT25-DVP3 emulator to your application board in place of your ST7. ■ TQFP32 (7x7) device adapter (DB522) – Adapts the emulator connection to the package of your ST7. ■ Ironwood TQFP32 socket (SK-UGA06/32A01) – solders to your application board to allow connection of the emulator. ) (s Replacing the TQFP32 (7x7) device adapter with your ST7 is possible using the Ironwood clam shell socket (ref: CA-QFE32SA-L-Z-T-02-D1442). The clam shell socket is not provided in the kit. t c u u d o r P e t e l o Figure 3. s b O Connection to application board 2. Plug device adapter (DB522) into the corresponding connector on the adapter (DB615). d o r P For more information... ■ ST7-DVP3 User Manual – Information common to all DVP3 series emulators ■ ST7MDT25-DVP3 Probe User Guide – Information specific to ST7MDT25-DVP3 s b O e t e ol Figure 1. 3. Plug the adapter’s connectors into the J1 and J2 connectors on the target emulation board. TQFP32 adapter (DB615) 4. Align pin 1 indicators, then insert the socket’s pins into the connector on the device adapter. Pin 1 Indicators 1. Solder socket to application board. September 2005 Rev 1 1/3 www.st.com 3 ST7MDT25-T32/DVP Revision history Date Revision 13-Sep-2005 1 Changes Initial release. ) s ( ct u d o r P e t e l o ) (s d t c u e t e ol s b O 2/3 o r P s b O ST7MDT25-T32/DVP ) s ( ct u d o r P e t e l o ) (s s b O t c u d e t e ol o r P s b O Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners © 2005 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 3/3