ST7MDT25-T64/DVP

ST7MDT25-T64/DVP TQFP64 (14x14) connection kit for ST7MDT25-DVP3 Features ■ Figure 2. TQFP64 device adapter (DB543) TQFP64/44 adapter (DB612) Allows the connection of your ST7MDT25DVP3 emulator to your application board in place of your ST7. ■ ) s ( ct TQFP64 (14x14) device adapter (DB543) u d o Adapts the emulator connection to the package of your ST7. ■ r P e CAB TQFP64 (14x14) socket and cover (CAB 3303262 and CAB 3303307) Solders to your application board to allow connection of the emulator or installation of your ST7. Description ) (s The TQFP64 (14x14) connection kit (ST7 MDT25-T64/DVP) provides the hardware you need to connect your ST7MDT25-DVP3 emulator to your application when debugging applications for ST7 microcontrollers in the TQFP64 (14x14) package. t c u d o r P e The two 50-pin flat cables for connection between the emulator and the adapter are provided with your ST7MDT25-DVP3 emulator. t e l o s b O Figure 1. t e l o Figure 3. s b O Connection to application board 3. Plug flat cables into the corresponding connectors J1 and J2 on the adapter 4. Plug the W2 and W1 connectors on the adapter into the corresponding connectors on the device adapter TQFP64/44 adapter (DB612) Orientation indicators Pin 1 indicators 2. Align pin indicators, then secure the device adapter to the socket 1. Solder socket to application board MS30124V1 November 2011 Doc ID 11625 Rev 2 1/3 www.st.com 3 Revision history 1 ST7MDT25-T64/DVP Revision history Table 1. Document revision history Date Revision Changes 13-Sep-2005 1 Initial release. 18-Nov-2011 2 Document formatting update ) s ( ct u d o r P e t e l o ) (s s b O t c u d o r P e t e l o s b O 2/3 Doc ID 11625 Rev 2 ST7MDT25-T64/DVP ) s ( ct Please Read Carefully: u d o Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. r P e All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. t e l o No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. ) (s s b O UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. t c u UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. d o r P e t e l o Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. s b O ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2011 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com Doc ID 11625 Rev 2 3/3