ST7MDTU5-EPB/US

ST7-EPB ST7-EPB series programming boards Data brief Features ■ In-circuit programming or in-situ programming of various ST7 devices (depending on the EPB and the ST7 it supports) ■ Supports executables in Motorola S19 and Intel formats ■ Voltage: 5 V ■ The EPB programming boards are delivered in a complete package that includes: – Programming sockets for all packages in the supported ST7 sub-family – Power supply – Parallel port interface to the host PC – STVP software for in-circuit programming s ( t c STMicroelectronic's ST7-EPB series programming boards can program all ST7 microcontrollers with OTP, EPROM, EEPROM or Flash memories, regardless of the package type. u d o Pr Some programming boards support in-situ programming or in-circuit programming of ST7 Flash microcontrollers installed on an application board. s b O All ST7-EPB series programming boards are delivered with ST Visual Programmer (STVP), ST's powerful, easy-to-use microcontroller programming interface which allows you to read, write and verify ST7 memory and option bytes. STVP also provides a project mode for storing programming configurations and automating programming sequences. November 2010 c u d e t le o r P o s b O ) Description e t e ol ) s t( Table 1. Part number ST7-EPB Order code – ST7MDTS1-EPB/xx for ST7SCR1x devices – ST7MDTU3-EPB/xx for ST7260x/263x devices – ST7MDTU5-EPB/xx for ST7265x devices(1) 1. Not recommended for new design Doc ID 18051 Rev 1 For further information contact your local STMicroelectronics sales office. Device summary 1/3 www.st.com 3 ST7-EPB Revision history Table 2. Document revision history Date Revision 05-Nov-2010 1 Changes Initial release. ) s t( c u d e t le o s b O ) s ( t c u d o r P e t e l o s b O 2/3 Doc ID 18051 Rev 1 o r P ST7-EPB ) s t( Please Read Carefully: c u d Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. e t le o r P Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. o s b No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. O ) UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. s ( t c u d o UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. r P e t e l o Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. s b O ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2010 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com Doc ID 18051 Rev 1 3/3