STB100N10F7, STD100N10F7, STF100N10F7
STI100N10F7, STP100N10F7
Datasheet
N-channel 100 V, 6.8 mΩ typ., 80 A STripFET F7 Power MOSFETs
in D2PAK, DPAK, TO-220FP, I2PAK and TO-220 packages
TAB
Features
TAB
2 3
1
3
1
D2PAK
TAB
TAB
ID
Package
STB100N10F7
80 A
D2PAK
STD100N10F7
80 A
DPAK
45 A
TO-220FP
STI100N10F7
80 A
I2PAK
STP100N10F7
80 A
TO-220
Order codes
DPAK
STF100N10F7
1
2
TO-220FP
3
12
3
I2PAK
1
2
3
TO-220
D(2, TAB)
G(1)
VDS
100 V
RDS(on) max.
8.0 mΩ
•
Among the lowest RDS(on) on the market
•
•
Excellent FoM (figure of merit)
Low Crss/Ciss ratio for EMI immunity
•
High avalanche ruggedness
Applications
•
Switching applications
S(3)
AM01475v1_noZen
Description
These N-channel Power MOSFETs utilize STripFET F7 technology with an enhanced
trench gate structure that results in very low on-state resistance, while also reducing
internal capacitance and gate charge for faster and more efficient switching.
Product status links
STB100N10F7
STD100N10F7
STF100N10F7
STI100N10F7
STP100N10F7
DS9291 - Rev 6 - March 2022
For further information contact your local STMicroelectronics sales office.
www.st.com
STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
Electrical ratings
1
Electrical ratings
Table 1. Absolute maximum ratings
Value
Symbol
D2PAK
Parameter
DPAK
TO-220FP
I2PAK
Unit
TO-220
VDS
Drain-source voltage
100
V
VGS
Gate-source voltage
±20
V
Drain current (continuous) at TC = 25 °C
ID
IDM(2)
PTOT(1)
80
45(1)
80
A
Drain current (continuous) at TC = 100 °C
62
32(1)
70
A
Drain current (pulsed)
320
180
320
A
Total power dissipation at TC = 25 °C
120
30
150
W
Insulation withstand voltage (RMS) from all three leads
VISO
to external heatsink
2.5
kV
(t = 1 s, TC = 25 °C)
TJ
Operating junction temperature
Tstg
°C
-55 to 175
Storage temperature range
°C
1. This value is limited by package.
2. Pulse width is limited by safe operating area.
Table 2. Thermal resistance
Value
Symbol
Parameter
RthJC
Thermal resistance, junction-to-case
RthJA
Thermal resistance, junction-to-ambient
(1)
RthJB
Thermal resistance, junction-to-board
D2PAK
DPAK
TO-220FP
1
1.25
5
30
I2PAK
Unit
TO-220
1
°C/W
62.5
°C/W
50
°C/W
1. When mounted on an 1-inch2 FR-4 board, 2oz CU, t < 10 s.
Table 3. Avalanche characteristics
Symbol
EAS
DS9291 - Rev 6
Parameter
Single pulse avalanche energy
(TJ = 25 °C, L = 3.5 mH, IAS = 15 A, VDD = 50 V, VGS = 10 V)
Value
Unit
400
mJ
page 2/30
STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
Electrical characteristics
2
Electrical characteristics
TCASE = 25 °C unless otherwise specified.
Table 4. On-/off-states
Test conditions
Symbol
D2PAK, DPAK
Parameter
I2PAK, TO-220
V(BR)DSS
Drain-source breakdown
voltage
TO-220FP
ID = 250 μA, VGS = 0 V
Min.
Typ.
100
IDSS
1
µA
100
µA
100
nA
4.5
V
6.8
8.0
mΩ
Min.
Typ.
Max.
Unit
-
4369
-
pF
-
823
-
pF
-
36
-
pF
VDS = 100 V, VGS = 0 V,
TC = 125 °C(1)
IGSS
Gate-body leakage current
VGS = 20 V, VDS = 0 V
VGS(th)
Gate threshold voltage
VDS = VGS, ID = 250 μA
RDS(on)
Static drain-source onresistance
VGS = 10 V,
VGS = 10 V,
ID = 40 A
ID = 22.5 A
Unit
V
VDS = 100 V, VGS = 0 V
Zero gate voltage drain
current
Max.
2.5
1. Defined by design, not subject to production test.
Table 5. Dynamic
Symbol
Parameter
Test conditions
Ciss
Input capacitance
Coss
Output capacitance
Crss
Reverse transfer capacitance
Qg
Total gate charge
VDD = 50 V, ID = 80 A,
-
61
-
nC
Gate-source charge
VGS = 0 to 10 V
-
26
-
nC
Gate-drain charge
(see Figure 17. Test circuit for gate charge
behavior)
-
13
-
nC
Min.
Typ.
Max.
Unit
Qgs
Qgd
VDS = 50 V, f = 1 MHz,
VGS = 0 V
Table 6. Switching times
Symbol
td(on)
tr
td(off)
tf
DS9291 - Rev 6
Parameter
Test conditions
Turn-on delay time
VDD = 50 V, ID = 40 A,
-
27
-
ns
Rise time
RG = 4.7 Ω, VGS = 10 V
-
40
-
ns
Turn-off delay time
(see Figure 16. Test circuit for resistive load
switching times and Figure 21. Switching time
waveform)
-
46
-
ns
-
15
-
ns
Fall time
page 3/30
STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
Electrical characteristics
Table 7. Source-drain diode
Symbol
ISD
ISDM
(1)
VSD(2)
Parameter
Test conditions
Min.
Typ.
Max.
Unit
Source-drain current
-
80
A
Source-drain current (pulsed)
-
320
A
1.2
V
Forward on voltage
ISD = 80 A, VGS = 0 V
-
trr
Reverse recovery time
ISD = 80 A, di/dt = 100 A/µs
-
77
ns
Qrr
Reverse recovery charge
VDD = 80 V, TJ = 150 °C
-
146
nC
IRRM
Reverse recovery current
(see Figure 18. Test circuit for inductive load
switching and diode recovery times)
-
4
A
1. Pulse width is limited by safe operating area.
2. Pulsed: pulse duration = 300 µs, duty cycle 1.5%
DS9291 - Rev 6
page 4/30
STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
Electrical characteristics (curves)
2.1
Electrical characteristics (curves)
Figure 1. Safe operating area for DPAK
Figure 2. Thermal impedance for DPAK
AM15754v1
)
on
D
S(
O
Li p e r
m at
ite io
d ni
by n
m th is
ax a
R re a
is
ID
(A)
100
100µs
10
Zth= k*R thJC
δ = tp /Ƭ
1ms
1
Tj=175°C
Tc=25°C
S ingle puls e
0.1
0.1
10
1
10ms
100
tp
Ƭ
VDS (V)
Figure 3. Safe operating area for TO-220FP
Figure 4. Thermal impedance for TO-220FP
AM15755v1
)
on
D
S(
O
pe
m ratio
ite n
d
by in th
m is
ax ar
R ea
is
ID
(A)
Li
100
10
100µs
Zth= k*R thJC
δ = tp /Ƭ
1ms
1
Tj=175°C
Tc=25°C
Single pulse
0.1
0.1
10
1
10ms
100
Ƭ
VDS(V)
Figure 5. Safe operating area for D2PAK, I2PAK and
TO-220
AM15756v1
Figure 6. Thermal impedance for D2PAK, I2PAK and
TO-220
K δ=0.5
AM15761v1
)
on
D
S(
O
Li p e r
m at
ite io
d ni
by n
m th is
ax a
R re a
is
ID
(A)
tp
100
0.2
0.05
0.02
0.01
0.1
10
100µs
10 -1
Zth= k*R thJC
δ = tp /Ƭ
1ms
1
S ingle puls e
Tj=175°C
Tc=25°C
S ingle puls e
0.1
0.1
DS9291 - Rev 6
1
10
10ms
100
VDS (V)
tp
10
Ƭ
-2
10 -5
10 -4
10 -3
10 -2
10 -1
t (s )
p
page 5/30
STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
Electrical characteristics (curves)
Figure 8. Transfer characteristics
Figure 7. Output characteristics
AM15757v1
ID
(A)
VGS=10V
300
250
8V
200
200
7V
150
150
100
100
6V
50
50
5V
0
VDS=5V
300
9V
250
AM15745v1
ID
(A)
0
2
1
3
4
VDS(V)
Figure 9. Normalized V(BR)DSS vs temperature
AM15747v1
V(BR)DSS
(norm)
ID=250 µA
1.04
0
2
3
4
5
6
7
8
9
10 VGS(V)
Figure 10. Static drain-source on-resistance
AM15748v1
RDS(on)
(mΩ)
14.0
VGS=10V
12.0
1.02
10.0
8.0
1
6.0
0.98
4.0
0.96
2.0
0.94
-55 -30
0.0
-5
20
70
45
95 120
TJ(°C)
Figure 11. Gate charge vs gate-source voltage
AM15758v1
VGS
(V)
VDD=50V
12
0
20
40
60
80
100
ID(A)
Figure 12. Capacitance variations
AM15759v1
C
(pF)
5000
ID=80A
10
Ciss
4000
8
3000
6
2000
4
1000
2
0
DS9291 - Rev 6
0
20
40
60
Qg (nC)
0
0
10 20 30 40 50 60 70 80
Coss
Crss
VDS(V)
page 6/30
STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
Electrical characteristics (curves)
Figure 13. Normalized gate threshold voltage vs
temperature
Figure 14. Normalized on-resistance vs temperature
AM15760v2
RDS(on)
AM15746v1
VGS(th)
(norm)
(norm)
2
1.04
ID = 40 A
VGS = 10 V
1.8
ID= 250 µA
1.02
1.6
1
1.4
1.2
0.98
1
0.96
0.8
0.6
0.94
0.92
-55 -30
-5
20
45
70
95 120
0.4
-55 -30 -5
TJ(°C)
20 45
70
95 120
TJ(°C)
Figure 15. Source-drain diode forward characteristics
AM15749v1
VSD (V)
TJ=-55°C
1.1
1
0.9
TJ=25°C
0.8
0.7
TJ=150°C
0.6
0.5
0
DS9291 - Rev 6
20
40
60
80
100
ISD(A)
page 7/30
STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
Test circuits
3
Test circuits
Figure 16. Test circuit for resistive load switching times
Figure 17. Test circuit for gate charge behavior
VDD
12 V
2200
+ μF
3.3
μF
VDD
VD
VGS
1 kΩ
100 nF
RL
IG= CONST
VGS
RG
47 kΩ
+
pulse width
D.U.T.
2.7 kΩ
2200
μF
pulse width
D.U.T.
100 Ω
VG
47 kΩ
1 kΩ
AM01469v1
AM01468v1
Figure 18. Test circuit for inductive load switching and
diode recovery times
D
G
A
D.U.T.
S
25 Ω
A
A
L
100 µH
fast
diode
B
B
B
G
RG
VD
3.3
µF
D
+
Figure 19. Unclamped inductive load test circuit
1000
+ µF
2200
+ µF
VDD
3.3
µF
VDD
ID
D.U.T.
S
_
D.U.T.
Vi
pulse width
AM01470v1
AM01471v1
Figure 20. Unclamped inductive waveform
Figure 21. Switching time waveform
ton
V(BR)DSS
td(on)
toff
td(off)
tr
tf
VD
90%
90%
IDM
VDD
VDD
VGS
0
AM01472v1
DS9291 - Rev 6
10%
0
ID
VDS
10%
90%
10%
AM01473v1
page 8/30
STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
Package information
4
Package information
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages,
depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product
status are available at: www.st.com. ECOPACK is an ST trademark.
4.1
D²PAK (TO-263) type A package information
Figure 22. D²PAK (TO-263) type A package outline
0079457_26
DS9291 - Rev 6
page 9/30
STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
D²PAK (TO-263) type A package information
Table 8. D²PAK (TO-263) type A package mechanical data
Dim.
mm
Min.
Max.
A
4.40
4.60
A1
0.03
0.23
b
0.70
0.93
b2
1.14
1.70
c
0.45
0.60
c2
1.23
1.36
D
8.95
9.35
D1
7.50
7.75
8.00
D2
1.10
1.30
1.50
E
10.00
E1
8.30
8.50
8.70
E2
6.85
7.05
7.25
e
10.40
2.54
e1
4.88
5.28
H
15.00
15.85
J1
2.49
2.69
L
2.29
2.79
L1
1.27
1.40
L2
1.30
1.75
R
V2
DS9291 - Rev 6
Typ.
0.40
0°
8°
page 10/30
STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
D²PAK (TO-263) type A package information
Figure 23. D²PAK (TO-263) recommended footprint (dimensions are in mm)
0079457_Rev26_footprint
DS9291 - Rev 6
page 11/30
STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
DPAK (TO-252) type A2 package information
4.2
DPAK (TO-252) type A2 package information
Figure 24. DPAK (TO-252) type A2 package outline
0068772_type-A2_rev30
DS9291 - Rev 6
page 12/30
STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
DPAK (TO-252) type A2 package information
Table 9. DPAK (TO-252) type A2 mechanical data
Dim.
mm
Min.
Max.
A
2.20
2.40
A1
0.90
1.10
A2
0.03
0.23
b
0.64
0.90
b4
5.20
5.40
c
0.45
0.60
c2
0.48
0.60
D
6.00
6.20
D1
4.95
E
6.40
E1
5.10
5.20
5.30
e
2.159
2.286
2.413
e1
4.445
4.572
4.699
H
9.35
10.10
L
1.00
1.50
L1
2.60
2.80
3.00
L2
0.65
0.80
0.95
L4
0.60
R
V2
DS9291 - Rev 6
Typ.
5.10
5.25
6.60
1.00
0.20
0°
8°
page 13/30
STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
DPAK (TO-252) type A2 package information
Figure 25. DPAK (TO-252) recommended footprint (dimensions are in mm)
FP_0068772_30
DS9291 - Rev 6
page 14/30
STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
DPAK (TO-252) type C package information
4.3
DPAK (TO-252) type C package information
Figure 26. DPAK (TO-252) type C package outline
0068772_C_30
DS9291 - Rev 6
page 15/30
STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
DPAK (TO-252) type C package information
Table 10. DPAK (TO-252) type C mechanical data
Dim.
mm
Min.
Typ.
Max.
A
2.20
2.30
2.38
A1
0.90
1.01
1.10
A2
0.00
0.10
b
0.72
0.85
b4
5.13
c
0.47
0.60
c2
0.47
0.60
D
6.00
D1
5.25
E
6.50
E1
4.70
e
5.46
6.10
6.20
6.60
6.70
2.186
2.286
2.386
H
9.80
10.10
10.40
L
1.40
1.50
1.70
L1
L2
2.90 REF
0.90
L3
L4
1.25
0.51 BSC
0.60
L6
DS9291 - Rev 6
5.33
0.80
1.00
1.80 BSC
θ1
5°
7°
9°
θ2
5°
7°
9°
V2
0°
8°
page 16/30
STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
DPAK (TO-252) type C package information
Figure 27. DPAK (TO-252) recommended footprint (dimensions are in mm)
FP_0068772_30
DS9291 - Rev 6
page 17/30
STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
D²PAK and DPAK packing information
4.4
D²PAK and DPAK packing information
Figure 28. Tape outline
DS9291 - Rev 6
page 18/30
STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
D²PAK and DPAK packing information
Figure 29. Reel outline
T
40mm min.
access hole
at slot location
B
D
C
N
A
G measured
at hub
Tape slot
in core for
tape start
2.5mm min.width
Full radius
AM06038v1
Table 11. D²PAK tape and reel mechanical data
Tape
Dim.
DS9291 - Rev 6
Reel
mm
mm
Dim.
Min.
Max.
Min.
Max.
A0
10.5
10.7
A
B0
15.7
15.9
B
1.5
D
1.5
1.6
C
12.8
D1
1.59
1.61
D
20.2
E
1.65
1.85
G
24.4
F
11.4
11.6
N
100
K0
4.8
5.0
T
P0
3.9
4.1
P1
11.9
12.1
Base quantity
1000
P2
1.9
2.1
Bulk quantity
1000
R
50
T
0.25
0.35
W
23.7
24.3
330
13.2
26.4
30.4
page 19/30
STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
D²PAK and DPAK packing information
Table 12. DPAK tape and reel mechanical data
Tape
Dim.
mm
mm
Dim.
Min.
Max.
A0
6.8
7
A
B0
10.4
10.6
B
1.5
12.1
C
12.8
1.6
D
20.2
B1
D
DS9291 - Rev 6
Reel
1.5
Min.
Max.
330
13.2
D1
1.5
G
16.4
E
1.65
1.85
N
50
18.4
F
7.4
7.6
T
K0
2.55
2.75
P0
3.9
4.1
Base qty.
2500
P1
7.9
8.1
Bulk qty.
2500
P2
1.9
2.1
R
40
T
0.25
0.35
W
15.7
16.3
22.4
page 20/30
STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
TO-220FP package information
4.5
TO-220FP package information
Figure 30. TO-220FP package outline
7012510_Rev_13_B
DS9291 - Rev 6
page 21/30
STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
TO-220FP package information
Table 13. TO-220FP package mechanical data
Dim.
mm
Min.
Max.
A
4.40
4.60
B
2.50
2.70
D
2.50
2.75
E
0.45
0.70
F
0.75
1.00
F1
1.15
1.70
F2
1.15
1.70
G
4.95
5.20
G1
2.40
2.70
H
10.00
10.40
L2
DS9291 - Rev 6
Typ.
16.00
L3
28.60
30.60
L4
9.80
10.60
L5
2.90
3.60
L6
15.90
16.40
L7
9.00
9.30
Dia
3.00
3.20
page 22/30
STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
I²PAK package information
4.6
I²PAK package information
Figure 31. I²PAK package outline
0004982_Rev_9
DS9291 - Rev 6
page 23/30
STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
I²PAK package information
Table 14. I²PAK package mechanical data
Dim.
DS9291 - Rev 6
mm
Min.
Typ.
Max.
A
4.40
-
4.60
A1
2.40
-
2.72
b
0.61
-
0.88
b1
1.14
-
1.70
c
0.49
-
0.70
c2
1.23
-
1.32
D
8.95
-
9.35
e
2.40
-
2.70
e1
4.95
-
5.15
E
10.00
-
10.40
L
13.00
-
14.00
L1
3.50
-
3.93
L2
1.27
-
1.40
page 24/30
STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
TO-220 type A package information
4.7
TO-220 type A package information
Figure 32. TO-220 type A package outline
0015988_typeA_Rev_23
DS9291 - Rev 6
page 25/30
STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
TO-220 type A package information
Table 15. TO-220 type A package mechanical data
Dim.
mm
Min.
Max.
A
4.40
4.60
b
0.61
0.88
b1
1.14
1.55
c
0.48
0.70
D
15.25
15.75
D1
1.27
E
10.00
10.40
e
2.40
2.70
e1
4.95
5.15
F
1.23
1.32
H1
6.20
6.60
J1
2.40
2.72
L
13.00
14.00
L1
3.50
3.93
L20
16.40
L30
28.90
øP
3.75
3.85
Q
2.65
2.95
Slug flatness
DS9291 - Rev 6
Typ.
0.03
0.10
page 26/30
STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
Ordering information
5
Ordering information
Table 16. Order codes
Order code
Package
Packing
STB100N10F7
D2PAK
Tape and reel
STD100N10F7
DPAK
Tape and reel
TO-220FP
Tube
STI100N10F7
I2PAK
Tube
STP100N10F7
TO-220
Tube
STF100N10F7
DS9291 - Rev 6
Marking
100N10F7
page 27/30
STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
Revision history
Table 17. Document revision history
Date
Version
05-Oct-2012
1
Changes
Initial release.
Inserted device in TO-220FP.
07-Feb-2013
2
Updated title and features on the cover page, Table 1: Device summary, Table
2: Absolute maximum ratings, Table 3: Thermal resistance and Table 5: On/off
states accordingly.
Updated Table 6: Dynamic, Table 7: Switching times, Table 8: Source drain
diode and Section 4: Package mechanical data.
Added Section 5: Packaging mechanical data.
Modified: the entire typical values in Table 6, tf typical value in Table 7, VSD
and typical values for trr, qrr, IRRM
29-Apr-2013
3
Inserted: Table 4: Avalanche characteristics and Section 2.1: Electrical
characteristics (curves)
Minor text changes
Inserted device in D2PAK.
25-Nov-2013
4
Updated title and features on the cover page, Table 1: Device summary, Table
2: Absolute maximum ratings, Table 3: Thermal resistance and Table 5: On/off
states accordingly.
Updated Table 6: Dynamic, Section 4: Package mechanical data and Section
5: Packaging mechanical data.
Added STI100N10F7 device and updated the document accordingly.
Removed maturity status indication, updated title, features and description on
18-Jun-2018
5
cover page.
Updated Table 1. Absolute maximum ratings.
Updated Section 4 Package information.
Minor text changes.
02-Mar-2022
DS9291 - Rev 6
6
Updated Section 4 Package information.
Minor text changes.
page 28/30
STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
Contents
Contents
1
Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
2
Electrical characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.1
Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3
Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
4
Package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
5
4.1
D²PAK (TO-263) type A package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4.2
DPAK (TO-252) type A2 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4.3
DPAK (TO-252) type C package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
4.4
D²PAK and DPAK packing information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
4.5
TO-220FP package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
4.6
I²PAK package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
4.7
TO-220 type A package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
DS9291 - Rev 6
page 29/30
STB100N10F7,STD100N10F7,STF100N10F7,STI100N10F7,STP100N10F7
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST
products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST
products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of
Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. For additional information about ST trademarks, please refer to www.st.com/trademarks. All other product or service
names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2022 STMicroelectronics – All rights reserved
DS9291 - Rev 6
page 30/30