STB11NM80, STF11NM80
STI11NM80, STP11NM80, STW11NM80
N-channel 800 V, 0.35 Ω, 11 A MDmesh™ Power MOSFET
in D²PAK, TO-220FP, I²PAK, TO-220, TO-247
Features
Order codes
VDSS
RDS(on)
max
RDS(on)*Qg
ID
3
3
1
STB11NM80
1
D²PAK
STF11NM80
STI11NM80
800 V
< 0.40 Ω
14Ω*nC
2
TO-220FP
11 A
STP11NM80
STW11NM80
■
Low input capacitance and gate charge
■
Low gate input resistance
■
Best RDS(on)*Qg in the industry
I²PAK
Applications
■
3
3
12
Figure 1.
1
TO-220
2
2
3
1
TO-247
Internal schematic diagram
Switching applications
$
Description
These N-channel Power MOSFETs are
developed using STMicroelectronics'
revolutionary MDmesh™ technology, which
associates the multiple drain process with the
company's PowerMESH™ horizontal layout.
These devices offer extremely low on-resistance,
high dv/dt and excellent avalanche
characteristics. Utilizing ST's proprietary strip
technique, these Power MOSFETs boast an
overall dynamic performance which is superior to
similar products on the market.
Table 1.
'
3
!-V
Device summary
Order codes
Marking
Package
Packaging
STB11NM80
B11NM80
D²PAK
Tape and reel
STF11NM80
F11NM80
TO-220FP
STI11NM80
I11NM80
I²PAK
STP11NM80
P11NM80
TO-220
STW11NM80
W11NM80
TO-247
Tube
September 2011
Doc ID 9241 Rev 11
1/22
www.st.com
22
Contents
STB/F/I/P/W11NM80
Contents
1
Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1
Electrical characteristics (curves)
............................ 6
3
Test circuits
4
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5
Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
6
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
2/22
.............................................. 9
Doc ID 9241 Rev 11
STB/F/I/P/W11NM80
1
Electrical ratings
Electrical ratings
Table 2.
Absolute maximum ratings
Value
Symbol
Parameter
Unit
D²PAK, I²PAK
TO-220, TO-247
VDS
Drain-source voltage (VGS = 0)
800
VGS
Gate-source voltage
±30
TO-220FP
V
V
(1)
ID
Drain current (continuous) at TC = 25 °C
11
11
ID
Drain current (continuous) at TC=100 °C
8
8 (1)
IDM
(2)
PTOT
VISO
TJ
Tstg
44
(1)
A
A
Drain current (pulsed)
44
Total dissipation at TC = 25 °C
150
35
W
Derating factor
1.2
0.28
W/°C
2500
V
Insulation withstand voltage (DC)
Operating junction temperature
Storage temperature
-65 to 150
A
°C
1. Limited only by the maximum temperature allowed
2. Pulse width limited by safe operating area
Table 3.
Thermal data
Value
Symbol
Parameter
Unit
D²PAK TO-220FP I²PAK TO-220 TO-247
Rthj-case
Rthj-a
Rthj-pcb(1)
Tl
Thermal resistance junction-case
max
0.83
Thermal resistance junctionambient max
Thermal resistance junction-pcb
max
3.6
0.83
62.5
50
30
Maximum lead temperature for
soldering purpose
°C/W
°C/W
°C/W
300
°C
1. When mounted on 1inch² FR-4 board, 2 oz Cu
Table 4.
Symbol
Avalanche characteristics
Parameter
Value
Unit
IAS
Avalanche current, repetitive or notrepetitive (pulse width limited by Tj max)
2.5
A
EAS
Single pulse avalanche energy
(starting Tj = 25 °C, ID = IAR, VDD = 50 V)
400
mJ
Doc ID 9241 Rev 11
3/22
Electrical characteristics
2
STB/F/I/P/W11NM80
Electrical characteristics
(TCASE= 25 °C unless otherwise specified)
Table 5.
Symbol
On/off states
Parameter
Test conditions
Min.
Typ.
Max.
Unit
V(BR)DSS
Drain-source breakdown
voltage (VGS = 0)
ID = 250 µA
dv/dt (1)
Drain source voltage slope
VDD = 640 V, ID = 11 A,
VGS = 10 V
IDSS
Zero gate voltage drain
current (VGS = 0)
VDS = 800 V,
VDS = 800 V @125°C
10
100
µA
µA
IGSS
Gate body leakage current
(VDS = 0)
VGS = ±30 V
100
nA
VGS(th)
Gate threshold voltage
VDS= VGS, ID = 250 µA
4
5
V
RDS(on)
Static drain-source on
resistance
VGS= 10 V, ID= 5.5 A
0.35
0.40
Ω
Min.
Typ.
Max.
Unit
800
V
30
3
V/ns
1. Characteristic value at turn off on inductive load
Table 6.
Symbol
Dynamic
Parameter
Test conditions
gfs (1)
Forward transconductance
VDS > ID(on) x RDS(on)max,
ID= 7.5 A
-
8
-
S
Ciss
Coss
Crss
Input capacitance
Output capacitance
Reverse transfer
capacitance
VDS =25 V, f=1 MHz,
VGS=0
-
1630
750
30
-
pF
pF
pF
Qg
Qgs
Qgd
Total gate charge
Gate-source charge
Gate-drain charge
VDD=640 V, ID = 11 A
VGS =10 V
(see Figure 18)
-
43.6
11.6
21
-
nC
nC
nC
Rg
Gate input resistance
f=1MHz Gate DC Bias=0
Test signal level=20 mV
open drain
-
2.7
-
Ω
Turn-on delay time
Rise time
Turn-off delay time
Fall time
VDD=400 V, ID= 5.5 A,
RG=4.7 Ω, VGS=10 V
(see Figure 17)
-
22
17
46
15
-
ns
ns
ns
ns
td(on)
tr
td(off)
tf
1. Pulsed: pulse duration=300µs, duty cycle 1.5%
4/22
Doc ID 9241 Rev 11
STB/F/I/P/W11NM80
Table 7.
Symbol
ISD
Electrical characteristics
Source drain diode
Parameter
Test conditions
Min.
Typ.
Source-drain current
Max.
Unit
11
A
44
A
0.86
V
-
ISDM(1)
Source-drain current (pulsed)
VSD(2)
Forward on voltage
ISD=11 A, VGS=0
-
Reverse recovery time
Reverse recovery charge
Reverse recovery current
ISD=11 A,
di/dt = 100 A/µs,
VDD= 50 V
-
612
7.22
23.6
ns
µC
A
Reverse recovery time
Reverse recovery charge
Reverse recovery current
ISD=11 A,
di/dt = 100 A/µs,
VDD= 50 V, Tj=150 °C
-
970
11.25
23.2
ns
µC
A
trr
Qrr
IRRM
trr
Qrr
IRRM
1. Pulse width limited by safe operating area
2. Pulsed: pulse duration=300µs, duty cycle 1.5%
Doc ID 9241 Rev 11
5/22
Electrical characteristics
STB/F/I/P/W11NM80
2.1
Electrical characteristics (curves)
Figure 2.
Safe operating area for D²PAK,
I²PAK, TO-220, TO-247
Figure 3.
Thermal impedance for D²PAK,
I²PAK, TO-220, TO-247
Figure 5.
Thermal impedance for TO-220FP
Figure 7.
Output characteristics @ TJ=150 °C
AM03328v1
ID
(A)
n)
(o
10µs
100µs
DS
Op
Lim era
ite tion
d
by in th
m is
ax ar
R e
a
is
1µs
10
1
1ms
Tj=150°C
Tc=25°C
10ms
Sinlge
pulse
0.1
0.1
1
10
100
VDS(V)
Figure 4.
Safe operating area for TO-220FP
ID
(A)
AM03329v1
10
1
1µs
is
ea )
ar S(on
is D
th R
in ax
n
io y m
t
b
ra
pe ed
O imit
L
10µs
100µs
1ms
10ms
Tj=150°C
Tc=25°C
0.1
Sinlge
pulse
0.01
0.1
Figure 6.
6/22
1
10
100
Output characteristics
VDS(V)
Doc ID 9241 Rev 11
STB/F/I/P/W11NM80
Figure 8.
Electrical characteristics
Transfer characteristics
Figure 9.
Transconductance
Figure 10. Gate charge vs gate-source voltage Figure 11. Capacitance variations
Figure 12. Normalized gate threshold voltage
vs temperature
Figure 13. Static drain-source on resistance
Doc ID 9241 Rev 11
7/22
Electrical characteristics
STB/F/I/P/W11NM80
Figure 14. Source-drain diode forward
characteristics
Figure 15. Normalized on resistance vs
temperature
Figure 16. Normalized BVDSS vs temperature
8/22
Doc ID 9241 Rev 11
STB/F/I/P/W11NM80
3
Test circuits
Test circuits
Figure 17. Switching times test circuit for
resistive load
Figure 18. Gate charge test circuit
VDD
12V
47kΩ
1kΩ
100nF
3.3
μF
2200
RL
μF
VGS
IG=CONST
VDD
100Ω
Vi=20V=VGMAX
VD
RG
2200
μF
D.U.T.
D.U.T.
VG
2.7kΩ
PW
47kΩ
1kΩ
PW
AM01468v1
AM01469v1
Figure 19. Test circuit for inductive load
Figure 20. Unclamped inductive load test
switching and diode recovery times
circuit
A
A
D.U.T.
FAST
DIODE
B
B
L
A
D
G
VD
L=100μH
S
3.3
μF
B
25 Ω
1000
μF
D
VDD
2200
μF
3.3
μF
VDD
ID
G
RG
S
Vi
D.U.T.
Pw
AM01470v1
Figure 21. Unclamped inductive waveform
AM01471v1
Figure 22. Switching time waveform
ton
V(BR)DSS
tdon
VD
toff
tr
tdoff
tf
90%
90%
IDM
10%
ID
VDD
10%
0
VDD
VDS
90%
VGS
AM01472v1
0
Doc ID 9241 Rev 11
10%
AM01473v1
9/22
Package mechanical data
4
STB/F/I/P/W11NM80
Package mechanical data
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com. ECOPACK
is an ST trademark.
10/22
Doc ID 9241 Rev 11
STB/F/I/P/W11NM80
Table 8.
Package mechanical data
D²PAK (TO-263) mechanical data
mm
Dim.
Min.
Typ.
Max.
A
4.40
4.60
A1
0.03
0.23
b
0.70
0.93
b2
1.14
1.70
c
0.45
0.60
c2
1.23
1.36
D
8.95
9.35
D1
7.50
E
10
E1
8.50
10.40
e
2.54
e1
4.88
5.28
H
15
15.85
J1
2.49
2.69
L
2.29
2.79
L1
1.27
1.40
L2
1.30
1.75
R
V2
0.4
0°
8°
Doc ID 9241 Rev 11
11/22
Package mechanical data
STB/F/I/P/W11NM80
Figure 23. D²PAK (TO-263) drawing
0079457_S
Figure 24. D²PAK footprint(a)
16.90
12.20
5.08
1.60
3.50
9.75
a. All dimension are in millimeters
12/22
Doc ID 9241 Rev 11
Footprint
STB/F/I/P/W11NM80
Table 9.
Package mechanical data
TO-220FP mechanical data
mm
Dim.
Min.
Typ.
Max.
A
4.4
4.6
B
2.5
2.7
D
2.5
2.75
E
0.45
0.7
F
0.75
1
F1
1.15
1.70
F2
1.15
1.70
G
4.95
5.2
G1
2.4
2.7
H
10
10.4
L2
16
L3
28.6
30.6
L4
9.8
10.6
L5
2.9
3.6
L6
15.9
16.4
L7
9
9.3
Dia
3
3.2
Figure 25. TO-220FP drawing
L7
E
A
B
D
Dia
L5
L6
F1
F2
F
G
H
G1
L4
L2
L3
7012510_Rev_K
Doc ID 9241 Rev 11
13/22
Package mechanical data
Table 10.
STB/F/I/P/W11NM80
I²PAK (TO-262) mechanical data
mm.
DIM.
min.
typ
max.
A
4.40
4.60
A1
2.40
2.72
b
0.61
0.88
b1
1.14
1.70
c
0.49
0.70
c2
1.23
1.32
D
8.95
9.35
e
2.40
2.70
e1
4.95
5.15
E
10
10.40
L
13
14
L1
3.50
3.93
L2
1.27
1.40
Figure 26. I²PAK (TO-262) drawing
0004982_Rev_H
14/22
Doc ID 9241 Rev 11
STB/F/I/P/W11NM80
Table 11.
Package mechanical data
TO-220 type A mechanical data
mm
Dim.
Min.
Typ.
Max.
A
4.40
4.60
b
0.61
0.88
b1
1.14
1.70
c
0.48
0.70
D
15.25
15.75
D1
1.27
E
10
10.40
e
2.40
2.70
e1
4.95
5.15
F
1.23
1.32
H1
6.20
6.60
J1
2.40
2.72
L
13
14
L1
3.50
3.93
L20
16.40
L30
28.90
∅P
3.75
3.85
Q
2.65
2.95
Doc ID 9241 Rev 11
15/22
Package mechanical data
STB/F/I/P/W11NM80
Figure 27. TO-220 type A drawing
0015988_typeA_Rev_S
16/22
Doc ID 9241 Rev 11
STB/F/I/P/W11NM80
Table 12.
Package mechanical data
TO-247 mechanical data
mm
Dim.
Min.
Typ.
Max.
A
4.85
5.15
A1
2.20
2.60
b
1.0
1.40
b1
2.0
2.40
b2
3.0
3.40
c
0.40
0.80
D
19.85
20.15
E
15.45
15.75
e
5.45
L
14.20
14.80
L1
3.70
4.30
L2
18.50
∅P
3.55
3.65
∅R
4.50
5.50
S
5.50
Doc ID 9241 Rev 11
17/22
Package mechanical data
STB/F/I/P/W11NM80
Figure 28. TO-247 drawing
0075325_F
18/22
Doc ID 9241 Rev 11
STB/F/I/P/W11NM80
5
Packaging mechanical data
Packaging mechanical data
Table 13.
D²PAK (TO-263) tape and reel mechanical data
Tape
Reel
mm
mm
Dim.
Dim.
Min.
Max.
A0
10.5
10.7
A
B0
15.7
15.9
B
1.5
D
1.5
1.6
C
12.8
D1
1.59
1.61
D
20.2
E
1.65
1.85
G
24.4
F
11.4
11.6
N
100
K0
4.8
5.0
T
P0
3.9
4.1
P1
11.9
12.1
Base qty
1000
P2
1.9
2.1
Bulk qty
1000
R
50
T
0.25
0.35
W
23.7
24.3
Doc ID 9241 Rev 11
Min.
Max.
330
13.2
26.4
30.4
19/22
Packaging mechanical data
STB/F/I/P/W11NM80
Figure 29. Tape
10 pitches cumulative
tolerance on tape +/- 0.2 mm
T
P0
Top cover
tape
P2
D
E
F
W
K0
B0
A0
P1
D1
User direction of feed
R
Bending radius
User direction of feed
AM08852v2
Figure 30. Reel
T
REEL DIMENSIONS
40mm min.
Access hole
At sl ot location
B
D
C
N
A
Full radius
Tape slot
in core for
tape start 25 mm min.
width
G measured at hub
AM08851v2
20/22
Doc ID 9241 Rev 11
STB/F/I/P/W11NM80
6
Revision history
Revision history
Table 14.
Document revision history
Date
Revision
Changes
30-Sep-2004
4
Preliminary version
26-Nov-2005
5
Complete version
07-Apr-2006
6
Modified value on Figure 8
15-May-2006
7
New dv/dt value on Table 5
20-Jul-2006
8
The document has been reformatted
20-Dec-2007
9
Updated ID value on Table 2: Absolute maximum ratings
24-Mar-2010
10
Inserted dv/dt value in Table 2: Absolute maximum ratings
12-Sep-2011
11
Added new package and mechanical data : I²PAK
Minor text changes
Doc ID 9241 Rev 11
21/22
STB/F/I/P/W11NM80
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2011 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
22/22
Doc ID 9241 Rev 11