STB13005-1

STB13005 High voltage fast-switching NPN power transistor Features ■ Low spread of dynamic parameters ■ Minimum lot-to-lot spread for reliable operation ■ Very high switching speed ■ Through hole TO-262 (I2PAK) power package in tube (suffix “-1”) 3 12 Applications ■ Electronic ballast for fluorescent lighting ■ Switch mode power supplies I2PAK Description The device is manufactured using high voltage multi-epitaxial planar technology for high switching speeds and medium voltage capability. It uses a cellular emitter structure with planar edge termination to enhance switching speeds while maintaining the wide RBSOA. Table 1. Figure 1. Internal schematic diagram Device summary Order code Marking (1) B13005A STB13005-1 B13005B Package Packaging I2PAK Tube 1. Product is pre-selected in DC current gain (group A and group B). STMicroelectronics reserves the right to ship either groups according to production availability. Please contact your nearest STMicroelectronics sales office for delivery details. October 2007 Rev 1 1/11 www.st.com 11 Contents STB13005 Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3 Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 5 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2/11 STB13005 1 Electrical ratings Electrical ratings Table 2. Absolute maximum rating Symbol Parameter Value Unit VCES Collector-emitter voltage (VBE = 0) 700 V VCEO Collector-emitter voltage (IB = 0) 400 V VEBO Emitter-base voltage (IC = 0) 9 V Collector current 4 A Collector peak current (tP < 5ms) 8 A Base current 2 A IBM Base peak current (tP < 5ms) 4 A Ptot Total dissipation at Tc = 25°C 75 W Tstg Storage temperature -65 to 150 °C 150 °C IC ICM IB TJ Max. operating junction temperature 3/11 Electrical characteristics 2 STB13005 Electrical characteristics (Tcase = 25°C unless otherwise specified) Table 3. Electrical characteristics Symbol Parameter ICES Collector cut-off current (VBE = 0) IEBO Emitter cut-off current (IC = 0) Collector-emitter VCEO(sus) (1) sustaining voltage (IB = 0) VCE(sat) (1) Collector-emitter saturation voltage Test conditions hFE (1)(2) Base-emitter saturation voltage DC current gain Typ. VCE =700 V VCE =700 V TC = 125°C VEB = 9 V IC =10 mA Max. Unit 1 5 mA mA 1 mA 400 IC = 1 A _ IB = 0.2 A IC = 2 A _ _ IB = 0.5 A IC = 4 A _ _ VBE(sat) (1) Min. V IB = 1 A IC = 1 A _ IB = 0.2 A IC = 2 A _ _ IB = 0.5 A IC = 1 A _ VCE = 5 V Group A Group B IC = 2 A _ _ VCE = 5 V Resistive load IC = 2 A ts Storage time IB1 = - IB2 = 0.4 A tf Fall time tp = 30 µs 0.5 0.6 1 V V V 1.2 1.6 V V 15 32 27 45 8 40 1.5 3 VCC = 125 V 0.2 µs µs 1. Pulsed duration = 300 ms, duty cycle £1.5% 2. Product is pre-selected in DC current gain (group A and group B). STMicroelectronics reserves the right to ship either groups according to production availability. Please contact your nearest STMicroelectronics sales office for delivery details. 4/11 STB13005 2.1 Electrical characteristics Electrical characteristics (curves) Figure 2. Safe operating area Figure 3. Derating curve Figure 4. DC current gain Figure 5. DC current gain Figure 6. Collector-emitter saturation voltage Figure 7. Base-emitter saturation voltage 5/11 Electrical characteristics Figure 8. Inductive load fall time Figure 10. Resistive load fall time Figure 12. Reverse biased operating area 6/11 STB13005 Figure 9. Inductive load storage time Figure 11. Resistive load storage time STB13005 3 Test circuit Test circuit Figure 13. Inductive load switching test circuit 1) Fast electronic switch 2) Non-inductive resistor 3) Fast recovery rectifier Figure 14. Resistive load switching test circuit 1) Fast electronic switch 2) Non-inductive resistor 7/11 Package mechanical data 4 STB13005 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 8/11 STB13005 Package mechanical data TO-262 (I2PAK) MECHANICAL DATA mm. inch DIM. MIN. TYP MAX. MIN. TYP. MAX. A 4.40 4.60 0.173 0.181 A1 2.40 2.72 0.094 0.107 b 0.61 0.88 0.024 0.034 b1 1.14 1.70 0.044 0.066 c 0.49 0.70 0.019 0.027 c2 1.23 1.32 0.048 0.052 D 8.95 9.35 0.352 0.368 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.194 0.202 E 10 10.40 0.393 0.410 L 13 14 0.511 0.551 L1 3.50 3.93 0.137 0.154 L2 1.27 1.40 0.050 0.055 9/11 Revision history 5 STB13005 Revision history Table 4. 10/11 Document revision history Date Revision 11-Oct-2007 6 Changes Initial release STB13005 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS “AUTOMOTIVE GRADE” MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 11/11