STB13007DT4

STB13007DT4 High voltage fast-switching NPN power transistor General features ■ Improved specification: Lower leakage current, Tighter gain range, DC current gain preselection, Tighter storage time range ■ High voltage capability ■ Integrated free-wheeling diode ■ Low spread of dynamic parameters ■ Minimum lot-to-lot spread for reliable operation ■ Very high switching speed D2PAK ■ Fully characterized at 125 °C (T0-263) ■ Large RBSOA ■ In compliance with the 2002/93/EC European Directive 1 3 Internal schematic diagram Description The device is manufactured using high voltage Multi-Epitaxial Planar technology for high switching speeds and medium voltage capability. It uses a Cellular Emitter structure to enhance switching speeds. Applications ■ Electronic transformers for halogen lamps ■ Switch mode power supplies Order codes Part Number Marking Package Packing STB13007DT4 B13007D D 2PAK Tape & Reel April 2007 Rev 2 1/9 www.st.com 9 Electrical ratings STB13007DT4 1 Electrical ratings Table 1. Absolute maximum rating Symbol Parameter Value Unit VCEV Collector-emitter voltage (VBE = -1.5V) 700 V VCEO Collector-emitter voltage (IB = 0) 400 V VEBO Emitter-base voltage (IC = 0) 9 V Collector current 8 A Collector peak current (tP < 5ms) 16 A Base current 4 A IBM Base peak current (tP < 5ms) 8 A Ptot Total dissipation at Tc = 25°C 80 W Tstg Storage temperature -65 to 150 °C 150 °C Value Unit 1.56 62.5 °C/W °C/W IC ICM IB TJ Table 2. Symbol Rthj-case Rthj-amb 2/9 Max. operating junction temperature Thermal data Parameter Thermal resistance junction-case Thermal resistance junction-amb __max __max STB13007DT4 2 Electrical characteristics Electrical characteristics (Tcase = 25°C unless otherwise specified) Table 3. Symbol Electrical characteristics Parameter Test Conditions Min. Typ. VCE =700V Max. Unit 10 0.5 µA mA ICES Collector cut-off current (V BE =0V) ICEO Collector cut-off current (IB =0) VCE =400V 100 µA IEBO Emitter cut-off current (IC =0) VEB =9V 100 µA Collector-emitter VCEO(sus) (1) sustaining voltage (IB = 0) VCE =700V Tc =100°C IC =10mA 400 V IC = 2A VCE(sat) (1) Collector-emitter saturation voltage _ _ _ IB = 0.4A IC = 5 A __ _ IB = 1A IC = 8 A __ _ IB = 2A 0.8 V 1.5 V 2 V 3 V 1.2 V IC = 5A _ _ _ IB = 0.4A __ _ IB = 1A 1.6 V IC = 5A __ _ IB = 1A 1.5 V IC = 5 A __ _ IB = 1A Tc =100°C IC = 2A VBE(sat) (1) Base-emitter saturation voltage Tc =100°C DC current gain IC = 2A IC = 5A Vf Diode forward voltage IC = 3A ts Inductive load Storage time Fall time hFE tf ts tf Inductive load Storage time Fall time _ _VCE = 5V _VCE = 5V 18 40 8 25 2.5 V 1.7 2.3 µs 90 150 ns IC = 5A ___ VClamp = 250V IB1 = 1A VBE(off) = -5V RBB = 0Ω L = 200µH (see fig. 11) IC = 5A ___ VClamp = 250V IB1 = 1A VBE(off) = -5V RBB = 0Ω L = 200µH Tc =125°C (see fig. 11) 2.2 µs 150 ns Note (1) Pulsed duration = 300 µs, duty cycle ≤1.5% 3/9 Electrical characteristics 2.1 4/9 STB13007DT4 Electrical characteristics (curves) Figure 1. Safe operating area Figure 2. Derating curve Figure 3. DC current gain Figure 4. DC current gain Figure 5. Collector-emitter saturation voltage Figure 6. Base-emitter saturation voltage STB13007DT4 2.2 Electrical characteristics Figure 7. Diode forward voltage Figure 8. Switching times inductive load Figure 9. Switching times inductive load Figure 10. Reverse biased safe operating area Test circuits Figure 11. Inductive load switching test circuit 1) Fast electronic switch 2) Non-inductive resistor 3) Fast recovery rectifier 5/9 Package mechanical data 3 STB13007DT4 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 6/9 STB13007DT4 Package mechanical data TO-263 (D2PAK) MECHANICAL DATA DIM. mm MIN. TYP. inch MAX. MIN. TYP. MAX. A 4.40 4.60 0.173 0.181 A1 2.49 2.69 0.098 0.106 A2 0.03 0.23 0.001 0.009 B 0.70 0.93 0.027 0.036 B2 1.14 1.70 0.044 0.067 C 0.45 0.60 0.017 0.023 C2 1.23 1.36 0.048 0.053 D 8.95 9.35 0.352 D1 E 8.00 10.00 E1 0.368 0.315 10.40 0.393 8.50 0.409 0.334 G 4.88 5.28 0.192 0.208 L 15.00 15.85 0.590 0.624 L2 1.27 1.4 0.050 0.055 L3 1.40 1.75 0.055 0.068 M 2.40 3.2 0.094 0.126 8o 0o R V2 0.40 0o - Weight : 1.38 g (typ.) - The planaty of the slug must be within 30 µm 0.016 8o P011P6/G 7/9 Revision history STB13007DT4 4 Revision history Table 4. Revision history Date Revision 19-Jun-2006 1 Initial release. 27-Apr-2007 2 The package’s mechanical data has been update on page 7 8/9 Changes STB13007DT4 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS “AUTOMOTIVE GRADE” MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 9/9