STB16NM50N

STB16NM50N - STF/I16NM50N STP16NM50N - STW16NM50N N-channel 500 V - 0.21 Ω - 15 A MDmesh™ II Power MOSFET D2PAK - I2PAK - TO-220 - TO-247- TO-220FP Features VDSS (@Tjmax) Type RDS(on) max ID 3 3 12 1 STB16NM50N 550 V 0.26 Ω 15 A STI16NM50N 550 V 0.26 Ω 15 A STF16NM50N 550 V 0.26 Ω 15 A (1) D²PAK I²PAK 2 3 1 STP16NM50N 550 V 0.26 Ω 15 A STW16NM50N 550 V 0.26 Ω 15 A TO-247 3 1. Limited only by maximum temperature allowed 1 TO-220 ■ 100% avalanche tested ■ Low input capacitance and gate charge ■ Low gate input resistance Figure 1. 3 2 1 2 TO-220FP Internal schematic diagram Application ■ Switching applications Description This series of devices is designed using the second generation of MDmesh™ technology. This revolutionary Power MOSFET associates a new vertical structure to the company’s strip layout to yield one of the world’s lowest on-resistance and gate charge. It is therefore suitable for the most demanding high efficiency converters. Table 1. Device summary Order codes Marking Package Packaging STB16NM50N B16NM50N D²PAK Tape and reel STI16NM50N I16NM50N I²PAK Tube STF16NM50N F16NM50N TO-220FP Tube STP16NM50N P16NM50N TO-220 Tube STW16NM50N W16NM50N TO-247 Tube March 2008 Rev 2 1/18 www.st.com 18 Contents STB16NM50N - STF/I16NM50N - STP16NM50N - STW16NM50N Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................ 6 3 Test circuit 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 5 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 2/18 ................................................ 9 STB16NM50N - STF/I16NM50N - STP16NM50N - STW16NM50N 1 Electrical ratings Electrical ratings Table 2. Absolute maximum ratings Value Symbol Parameter D²PAK/I²PAK TO-220FP TO-220/TO-247 Unit VDS Drain-source voltage (VGS=0) 500 V VGS Gate-source voltage ± 25 V ID Drain current (continuous) at TC = 25°C 15 15 (1) A ID Drain current (continuous) at TC = 100°C 9.4 9.4 (1) A IDM (2) Drain current (pulsed) 60 60 (1) A PTOT Total dissipation at TC = 25°C 125 30 W dv/dt (3) Peak diode recovery voltage slope 15 VISO Insulation withstand voltage (RMS) from all three leads to external heat sink (t=1s;TC=25°C) Tstg Storage temperature Tj -- V/ns 2500 V -55 to 150 °C 150 °C Max. operating junction temperature 1. Limited only by maximum temperature allowed 2. Pulse width limited by safe operating area 3. ISD ≤15A, di/dt ≤400A/µs, VDD = 80% V(BR)DSS Table 3. Thermal data Value Symbol Parameter Unit TO-220 I²PAK D²PAK TO-247 TO-220FP Rthj-case Thermal resistance junctioncase max Rthj-amb Thermal resistance junctionamb max Rthj-pcb Thermal resistance junctionpcb max Tl Table 4. Symbol 1 62.5 -- -- Maximum lead temperature for soldering purposes 4.2 °C/W -- 50 62.5 °C/W 30 -- -- °C/W 300 °C Avalanche characteristics Parameter IAS Avalanche current, repetitive or not-repetitive (pulse width limited by Tj max) EAS Single pulse avalanche energy (starting Tj=25°C, ID=IAS, VDD= 50V) Max value Unit 6 A 470 mJ 3/18 Electrical characteristics 2 STB16NM50N - STF/I16NM50N - STP16NM50N - STW16NM50N Electrical characteristics (TCASE=25 °C unless otherwise specified) Table 5. Symbol V(BR)DSS dv/dt(1) 1. Parameter Drain-source breakdown voltage Drain-source voltage slope Test conditions ID = 1 mA, VGS= 0 Min. Typ. Max. 500 VDD = 400 V,ID = 15 A, V 30 VGS = 10 V Unit VDS = Max rating, V/ns VDS = Max rating@125 °C 1 100 µA µA Gate body leakage current (VDS = 0) VGS = ±20 V 100 nA VGS(th) Gate threshold voltage VDS= VGS, ID = 250 µA 3 4 V RDS(on) Static drain-source on resistance VGS= 10 V, ID= 7.5 A 0.21 0.26 Ω Typ. Max. Unit IDSS Zero gate voltage drain current (VGS = 0) IGSS 2 Characteristics value at turn off on inductive load Table 6. Symbol Dynamic Parameter gfs(1) Forward transconductance Ciss Coss Crss Input capacitance Output capacitance Reverse transfer capacitance Test conditions VDS =15 V, ID= 7.5 A VDS = 50 V, f =1 MHz, VGS = 0 Min. 10 S 1200 80 10 pF pF pF Equivalent output capacitance VGS = 0, VDS = 0 to 400 V 170 pF Rg Gate input resistance f=1 MHz Gate DC Bias=0 Test signal level=20 mV open drain 5 Ω Qg Qgs Qgd Total gate charge Gate-source charge Gate-drain charge 38 7 19 nC nC nC Coss eq.(2) 1. On/off states VDD = 400 V, ID = 15 A VGS = 10 V (see Figure 19) Pulsed: pulse duration = 300µs, duty cycle 1.5% 2. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0 to 80% VDSS 4/18 STB16NM50N - STF/I16NM50N - STP16NM50N - STW16NM50N Table 7. Symbol td(on) tr td(off) tf Table 8. Symbol ISD ISDM VSD(1) trr Qrr IRRM trr Qrr IRRM 1. Electrical characteristics Switching times Parameter Turn-on delay time Rise time Turn-off delay time Fall time Test conditions Min. Typ Max 20 15 60 16 VDD = 250 V, ID = 7.5 A, RG = 4.7 Ω, VGS = 10 V (see Figure 18) Unit ns ns ns ns Source drain diode Parameter Test conditions Min. Typ Source-drain current Source-drain current (pulsed) Max Unit 15 60 A A 1.3 V Forward on voltage ISD = 15 A, VGS=0 Reverse recovery time Reverse recovery charge Reverse recovery current ISD =15 A, di/dt =100 A/µs, VDD = 100 V (see Figure 23) 400 5 24 ns µC A Reverse recovery time Reverse recovery charge Reverse recovery current VDD = 100 V di/dt =100 A/µs, ISD = 15 A Tj = 150 °C (see Figure 23) 500 6 24 ns µC A Pulsed: pulse duration = 300µs, duty cycle 1.5% 5/18 Electrical characteristics STB16NM50N - STF/I16NM50N - STP16NM50N - STW16NM50N 2.1 Electrical characteristics (curves) Figure 2. Safe operating area for TO-220 / D²PAK / I²PAK Figure 3. Thermal impedance for TO-220 / D²PAK / I²PAK Figure 4. Safe operating area for TO-220FP Figure 5. Thermal impedance for TO-220FP Figure 6. Safe operating area for TO-247 Figure 7. Thermal impedance for TO-247 6/18 STB16NM50N - STF/I16NM50N - STP16NM50N - STW16NM50N Figure 8. Output characteristics Figure 10. Transconductance Figure 9. Electrical characteristics Transfer characteristics Figure 11. Static drain-source on resistance Figure 12. Gate charge vs gate-source voltage Figure 13. Capacitance variations 7/18 Electrical characteristics STB16NM50N - STF/I16NM50N - STP16NM50N - STW16NM50N Figure 14. Normalized gate threshold voltage vs temperature Figure 15. Normalized on resistance vs temperature Figure 16. Source-drain diode forward characteristics Figure 17. Normalized BVDSS vs temperature 8/18 STB16NM50N - STF/I16NM50N - STP16NM50N - STW16NM50N 3 Test circuit Test circuit Figure 18. Switching times test circuit for resistive load Figure 19. Gate charge test circuit Figure 20. Test circuit for inductive load Figure 21. Unclamped Inductive load test switching and diode recovery times circuit Figure 22. Unclamped inductive waveform Figure 23. Switching time waveform 9/18 Package mechanical data 4 STB16NM50N - STF/I16NM50N - STP16NM50N - STW16NM50N Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 10/18 STB16NM50N - STF/I16NM50N - STP16NM50N - STW16NM50N Package mechanical data TO-220 mechanical data mm inch Dim Min A b b1 c D D1 E e e1 F H1 J1 L L1 L20 L30 ∅P Q Typ 4.40 0.61 1.14 0.48 15.25 Max Min 4.60 0.88 1.70 0.70 15.75 0.173 0.024 0.044 0.019 0.6 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 1.27 10 2.40 4.95 1.23 6.20 2.40 13 3.50 Max 0.181 0.034 0.066 0.027 0.62 0.050 16.40 28.90 3.75 2.65 Typ 0.409 0.106 0.202 0.051 0.256 0.107 0.551 0.154 0.645 1.137 3.85 2.95 0.147 0.104 0.151 0.116 11/18 Package mechanical data STB16NM50N - STF/I16NM50N - STP16NM50N - STW16NM50N TO-220FP mechanical data mm. DIM. Min. A 4.4 inch Typ. Max. Min. Typ. 4.6 0.173 0.181 Max. 0.106 B 2.5 2.7 0.098 D 2.5 2.75 0.098 0.108 E 0.45 0.7 0.017 0.027 F 0.75 1 0.030 0.039 F1 1.15 1.7 0.045 0.067 F2 1.15 1.7 0.045 0.067 G 4.95 5.2 0.195 0.204 G1 2.4 2.7 0.094 0.106 H 10 10.4 0.393 L2 0.409 16 0.630 L3 28.6 30.6 1.126 1.204 L4 9.8 10.6 .0385 0.417 L5 2.9 3.6 0.114 0.141 L6 15.9 16.4 0.626 0.645 9 9.3 0.354 0.366 Ø 3 3.2 0.118 0.126 B D A E L7 L3 L6 F2 H G G1 F F1 L7 L2 12/18 L5 1 23 L4 STB16NM50N - STF/I16NM50N - STP16NM50N - STW16NM50N Package mechanical data TO-247 Mechanical data mm. Dim. A Min. 4.85 A1 2.20 2.60 b 1.0 1.40 b1 2.0 2.40 b2 3.0 3.40 c 0.40 0.80 D 19.85 20.15 E 15.45 15.75 e Typ Max. 5.15 5.45 L 14.20 14.80 L1 3.70 4.30 L2 18.50 øP 3.55 3.65 øR 4.50 5.50 S 5.50 13/18 Package mechanical data STB16NM50N - STF/I16NM50N - STP16NM50N - STW16NM50N I²PAK (TO-262) mechanical data mm inch Dim Min A A1 b b1 c c2 D e e1 E L L1 L2 14/18 4.40 2.40 0.61 1.14 0.49 1.23 8.95 2.40 4.95 10 13 3.50 1.27 Typ Max Min 4.60 2.72 0.88 1.70 0.70 1.32 9.35 2.70 5.15 10.40 14 3.93 1.40 0.173 0.094 0.024 0.044 0.019 0.048 0.352 0.094 0.194 0.393 0.511 0.137 0.050 Typ Max 0.181 0.107 0.034 0.066 0.027 0.052 0.368 0.106 0.202 0.410 0.551 0.154 0.055 STB16NM50N - STF/I16NM50N - STP16NM50N - STW16NM50N Package mechanical data D²PAK (TO-263) mechanical data mm inch Dim Min A A1 b b2 c c2 D D1 E E1 e e1 H J1 L L1 L2 R V2 Typ 4.40 0.03 0.70 1.14 0.45 1.23 8.95 7.50 10 8.50 Max Min 4.60 0.23 0.93 1.70 0.60 1.36 9.35 0.173 0.001 0.027 0.045 0.017 0.048 0.352 0.295 0.394 0.334 10.40 2.54 4.88 15 2.49 2.29 1.27 1.30 Max 0.181 0.009 0.037 0.067 0.024 0.053 0.368 0.409 0.1 5.28 15.85 2.69 2.79 1.40 1.75 0.192 0.590 0.099 0.090 0.05 0.051 8° 0° 0.4 0° Typ 0.208 0.624 0.106 0.110 0.055 0.069 0.016 8° 0079457_M 15/18 Packaging mechanical data 5 STB16NM50N - STF/I16NM50N - STP16NM50N - STW16NM50N Packaging mechanical data D2PAK FOOTPRINT TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. mm MIN. A B 1.5 C 12.8 D 20.2 G 24.4 N 100 T TAPE MECHANICAL DATA DIM. mm MIN. MAX. MIN. A0 10.5 10.7 0.413 0.421 B0 15.7 15.9 0.618 0.626 D 1.5 1.6 0.059 0.063 D1 1.59 1.61 0.062 0.063 E 1.65 1.85 0.065 0.073 F 11.4 11.6 0.449 0.456 K0 4.8 5.0 0.189 0.197 P0 3.9 4.1 0.153 0.161 P1 11.9 12.1 0.468 0.476 P2 1.9 2.1 0.075 0.082 MAX. R 50 1.574 T 0.25 0.35 0.0098 0.0137 W 23.7 24.3 * on sales type 16/18 inch 0.933 0.956 inch MAX. MIN. MAX. 330 12.992 13.2 0.504 0.520 26.4 0.960 1.039 0.059 0795 3.937 30.4 1.197 BASE QTY BULK QTY 1000 1000 STB16NM50N - STF/I16NM50N - STP16NM50N - STW16NM50N 6 Revision history Revision history Table 9. Document revision history Date Revision Changes 12-Oct-2007 1 First release 04-Mar-2008 2 Table 3: Thermal data has been updated. 17/18 STB16NM50N - STF/I16NM50N - STP16NM50N - STW16NM50N Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2008 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 18/18