STB2N62K3

STD2N62K3, STF2N62K3, STU2N62K3 Datasheet N-channel 620 V, 2.9 Ω typ., 2.2 A MDmesh™ K3 Power MOSFETs in DPAK, TO-220FP and IPAK packages Features Order code VDS RDS(on)max. ID STD2N62K3 STF2N62K3 DPAK 620 V 3.6 Ω STU2N62K3 D(2, TAB) • • • • • G(1) S(3) AM01475V1 Package 2.2 A TO-220FP IPAK 100% avalanche tested Extremely high dv/dt capability Very low intrinsic capacitance Improved diode reverse recovery characteristics Zener-protected Applications • Switching applications Description Product status link These MDmesh™ K3 Power MOSFETs are the result of improvements applied to STMicroelectronics’ MDmesh™ technology, combined with a new optimized vertical structure. These devices boast an extremely low on-resistance, superior dynamic performance and high avalanche capability, rendering them suitable for the most demanding applications. STD2N62K3 STF2N62K3 STU2N62K3 DS7248 - Rev 3 - June 2018 For further information contact your local STMicroelectronics sales office. www.st.com STD2N62K3, STF2N62K3, STU2N62K3 Electrical ratings 1 Electrical ratings Table 1. Absolute maximum ratings Symbol Value Parameter DPAK TO-220FP IPAK Unit VDS Drain-source voltage 620 V VGS Gate-source voltage ±30 V ID Drain current (continuous) at TC = 25 °C ID Drain current (continuous) at TC = 100 °C IDM (2) VISO Insulation withstand voltage (RMS) from all three leads to external heat-sink (t = 1 s, TC = 25 °C) 1 (1) 2.2 A 1 A A 45 20 45 W - 2500 - V Peak diode recovery voltage slope Operating junction temperature range Tstg 2.2 (1) 8.8 Total dissipation at TC = 25 °C Tj 1 Drain current (pulsed) PTOT dv/dt (3) 2.2 Storage temperature range 12 V/ns -55 to 150 °C 1. Limited by maximum junction temperature. 2. Pulse width limited by safe operating area. 3. ISD ≤ 2.2 A, di/dt ≤ 400 A/μs, VDSpeak ≤ V(BR)DSS, VDD = 80% V(BR)DSS. Table 2. Thermal data Symbol Value Parameter Rthj-case Thermal resistance junction-case Rthj-amb Thermal resistance junction-ambient Rthj-pcb (1) Thermal resistance junction-pcb Unit DPAK TO-220FP IPAK 2.78 6.25 2.78 °C/W 62.5 100 °C/W 50 °C/W 1. When mounted on 1inch² FR-4 board, 2 oz Cu. Table 3. Avalanche characteristics Symbol Parameter Value Unit IAR(1) Avalanche current, repetitive or not-repetitive 2.2 A EAS(2) Single pulse avalanche energy 85 mJ 1. Pulse width limited by Tj max. 2. Starting Tj = 25 °C, ID = IAR, VDD = 50 V. DS7248 - Rev 3 page 2/27 STD2N62K3, STF2N62K3, STU2N62K3 Electrical characteristics 2 Electrical characteristics (TCASE = 25 °C unless otherwise specified) Table 4. On/off states Symbol Parameter V(BR)DSS Drain-source breakdown voltage Test conditions Min. ID = 1 mA, VGS = 0 V Typ. 620 Zero gate voltage drain current IGSS Gate body leakage current VDS = 0 V, VGS = ±20 V VGS(th) Gate threshold voltage VDS = VGS, ID = 50 µA RDS(on) Static drain-source on resistance VGS = 10 V, ID = 1.1 A VGS = 0 V, VDS = 620 V, TC = 125 °C 1 µA 50 µA ±10 µA 3.75 4.5 V 2.9 3.6 Ω Typ. Max. Unit - pF (1) 3 Unit V VGS = 0 V, VDS = 620 V IDSS Max. 1. Defined by design, not subject to production test. Table 5. Dynamic Symbol Parameter Ciss Input capacitance Coss Output capacitance Crss Reverse transfer capacitance Test conditions Min. 340 VDS = 50 V, f = 1 MHz, VGS = 0 V - 26 4 Co(tr) (1) Equivalent capacitance time related VDS = 0 to 496 V, VGS = 0 V - 17 - pF RG Intrinsic gate resistance f = 1 MHz open drain - 5 - Ω Qg Total gate charge Qgs Gate-source charge - nC Qgd Gate-drain charge VDD = 496 V, ID = 2.2 A, VGS = 0 to 10 V (see Figure 17. Test circuit for gate charge behavior) 15 - 3 9 1. Co(tr) is a constant capacitance value that gives the same charging time as Coss while VDS is rising from 0 to 80% VDSS. Table 6. Switching times Symbol td(on) tr td(off) tf DS7248 - Rev 3 Parameter Test conditions Turn-on delay time VDD = 310 V, ID = 1.1 A, Rise time RG = 4.7 Ω, VGS = 10 V Turn-off delay time (see Figure 16. Test circuit for resistive load switching times and Figure 21. Switching time waveform) Fall time Min. Typ. Max. Unit - ns 8 - 4.4 21 22 page 3/27 STD2N62K3, STF2N62K3, STU2N62K3 Electrical characteristics Table 7. Source drain diode Symbol Parameter Test conditions ISD Source-drain current ISDM (1) Source-drain current (pulsed) VSD (2) Forward on voltage ISD = 2.2 A, VGS = 0 V trr Reverse recovery time ISD = 2.2 A, di/dt = 100 A/µs Qrr Reverse recovery charge IRRM Reverse recovery current VDD = 60 V (see Figure 18. Test circuit for inductive load switching and diode recovery times) trr Reverse recovery time ISD = 2.2 A, di/dt = 100 A/µs Qrr Reverse recovery charge IRRM Reverse recovery current VDD = 60 V, Tj = 150 °C(see Figure 18. Test circuit for inductive load switching and diode recovery times) Min. Typ. Max. Unit 2.2 - 8.8 - - - 1.6 A V 200 ns 0.9 μC 9 A 240 ns 1.15 μC 10 A 1. Pulse width limited by safe operating area. 2. Pulsed: pulse duration = 300 μs, duty cycle 1.5%. Table 8. Gate-source Zener diode Symbol V(BR)GSO Parameter Gate-source breakdown voltage Test conditions Igs = ±1 mA, ID = 0 A Min. ±30 Typ. Max. Unit V The built-in back-to-back Zener diodes are specifically designed to enhance the ESD performance of the device. The Zener voltage facilitates efficient and cost-effective device integrity protection, thus eliminating the need for additional external componentry. DS7248 - Rev 3 page 4/27 STD2N62K3, STF2N62K3, STU2N62K3 Electrical characteristics curves 2.1 Electrical characteristics curves Figure 1. Safe operating area for DPAK and IPAK Figure 2. Thermal impedance for DPAK and IPAK AM09181v1 ID (A) Tj=150°C Tc=25°C Single pulse 101 10µs is ) n ea ar S(o is th x R D in a n m tio y ra d b pe te O imi L 100 10-1 10-2 10-1 101 100 100µs 1ms 10ms 102 VDS(V) Figure 3. Safe operating area for TO-220FP AM09182v1 ID (A) Figure 4. Thermal impedance for TO-220FP K GC20940_ZTH δ=0.5 0.1 δ=0.2 0.05 10-1 10-2 ) 100µs DS 100 (o n Op Lim erat ite ion i d n by thi m s ar ax e R a is 10µs 0.01 Single pulse 1ms 10ms 10 -2 Tj = 150 °C Tc = 25 °C Single pulse 10-1 100 101 102 VDS(V) Figure 5. Output characterisics DS7248 - Rev 3 0.02 10 -1 10 -3 10-4 10-3 10 -2 10 -1 10 0 tp(s) Figure 6. Transfer characteristics page 5/27 STD2N62K3, STF2N62K3, STU2N62K3 Electrical characteristics curves Figure 7. Gate charge vs gate-source voltage AM09186v1 VGS (V) VDS 12 Figure 8. Static drain-source on-resistance VDS (V) VDD=496V ID=2.2A 500 10 400 8 300 6 200 4 100 2 0 10 5 0 15 0 Qg (nC) Figure 9. Capacitance variations Figure 10. Output capacitance stored energy AM09188v1 C (pF) Ciss 100 10 Coss Crss 1 0.1 1 100 10 VDS(V) Figure 11. Normalized gate threshold voltage vs temperature AM09190v1 VGS(th) (norm) Figure 12. Normalized on-resistance vs temperature AM09191v1 RDS(on) (norm) ID=50µA 1.10 ID=1.1A VGS=10V 2.5 1.05 2.0 1.00 0.95 1.5 0.90 1.0 0.85 0.80 0.5 0.75 0.70 -75 DS7248 - Rev 3 -25 25 75 125 TJ(°C) 0 -75 -25 25 75 125 TJ(°C) page 6/27 STD2N62K3, STF2N62K3, STU2N62K3 Electrical characteristics curves Figure 14. Normalized V(BR)DSS vs temperature Figure 13. Source-drain diode forward characteristics AM09192v1 V(BR)DSS (norm) ID=1mA 1.10 1.05 1.00 0.95 0.90 -75 -25 25 75 125 TJ(°C) Figure 15. Maximum avalanche energy vs starting Tj AM09180v1 EAS (mJ) 90 ID=2.2 A VDD=50 V 80 70 60 50 40 30 20 10 0 0 DS7248 - Rev 3 20 40 60 80 100 120 140 TJ(°C) page 7/27 STD2N62K3, STF2N62K3, STU2N62K3 Test circuits 3 Test circuits Figure 16. Test circuit for resistive load switching times Figure 17. Test circuit for gate charge behavior VDD 12 V 2200 + μF 3.3 μF VDD VD VGS 1 kΩ 100 nF RL IG= CONST VGS RG 47 kΩ + pulse width D.U.T. 2.7 kΩ 2200 μF pulse width D.U.T. 100 Ω VG 47 kΩ 1 kΩ AM01469v1 AM01468v1 Figure 18. Test circuit for inductive load switching and diode recovery times D G A D.U.T. S 25 Ω A L A B B 3.3 µF D G + VD 100 µH fast diode B Figure 19. Unclamped inductive load test circuit RG 1000 + µF 2200 + µF VDD 3.3 µF VDD ID D.U.T. S D.U.T. Vi _ pulse width AM01471v1 AM01470v1 Figure 20. Unclamped inductive waveform Figure 21. Switching time waveform V(BR)DSS ton VD td(on) 90% IDM tf 90% 10% 10% 0 ID VDD toff td(off) tr VDD VGS 0 VDS 90% 10% AM01472v1 AM01473v1 DS7248 - Rev 3 page 8/27 STD2N62K3, STF2N62K3, STU2N62K3 Package information 4 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. DS7248 - Rev 3 page 9/27 STD2N62K3, STF2N62K3, STU2N62K3 DPAK (TO-252) type A package information 4.1 DPAK (TO-252) type A package information Figure 22. DPAK (TO-252) type A package outline 0068772_A_25 DS7248 - Rev 3 page 10/27 STD2N62K3, STF2N62K3, STU2N62K3 DPAK (TO-252) type A package information Table 9. DPAK (TO-252) type A mechanical data Dim. mm Min. Max. A 2.20 2.40 A1 0.90 1.10 A2 0.03 0.23 b 0.64 0.90 b4 5.20 5.40 c 0.45 0.60 c2 0.48 0.60 D 6.00 6.20 D1 4.95 E 6.40 E1 4.60 4.70 4.80 e 2.159 2.286 2.413 e1 4.445 4.572 4.699 H 9.35 10.10 L 1.00 1.50 (L1) 2.60 2.80 3.00 L2 0.65 0.80 0.95 L4 0.60 R V2 DS7248 - Rev 3 Typ. 5.10 5.25 6.60 1.00 0.20 0° 8° page 11/27 STD2N62K3, STF2N62K3, STU2N62K3 DPAK (TO-252) type C package information 4.2 DPAK (TO-252) type C package information Figure 23. DPAK (TO-252) type C package outline 0068772_C_25 DS7248 - Rev 3 page 12/27 STD2N62K3, STF2N62K3, STU2N62K3 DPAK (TO-252) type C package information Table 10. DPAK (TO-252) type C mechanical data Dim. mm Min. Typ. Max. A 2.20 2.30 2.38 A1 0.90 1.01 1.10 A2 0.00 0.10 b 0.72 0.85 b4 5.13 c 0.47 0.60 c2 0.47 0.60 D 6.00 D1 5.25 E 6.50 E1 4.70 e 5.46 6.10 6.20 6.60 6.70 2.186 2.286 2.386 H 9.80 10.10 10.40 L 1.40 1.50 1.70 L1 L2 2.90 REF 0.90 L3 L4 1.25 0.51 BSC 0.60 L6 DS7248 - Rev 3 5.33 0.80 1.00 1.80 BSC θ1 5° 7° 9° θ2 5° 7° 9° V2 0° 8° page 13/27 STD2N62K3, STF2N62K3, STU2N62K3 DPAK (TO-252) type E package information 4.3 DPAK (TO-252) type E package information Figure 24. DPAK (TO-252) type E package outline 0068772_type-E_rev.25 DS7248 - Rev 3 page 14/27 STD2N62K3, STF2N62K3, STU2N62K3 DPAK (TO-252) type E package information Table 11. DPAK (TO-252) type E mechanical data Dim. A mm Min. Typ. Max. 2.18 2.39 A2 0.13 b 0.65 0.884 b4 4.95 5.46 c 0.46 0.61 c2 0.46 0.60 D 5.97 6.22 D1 5.21 E 6.35 E1 4.32 6.73 e 2.286 e1 4.572 H 9.94 10.34 L 1.50 1.78 L1 L2 2.74 0.89 L4 1.27 1.02 Figure 25. DPAK (TO-252) recommended footprint (dimensions are in mm) FP_0068772_25 DS7248 - Rev 3 page 15/27 STD2N62K3, STF2N62K3, STU2N62K3 DPAK (TO-252) packing information 4.4 DPAK (TO-252) packing information Figure 26. DPAK (TO-252) tape outline 10 pitches cumulative tolerance on tape +/- 0.2 mm T P0 Top cover tape P2 D E F B1 K0 For machine ref. only including draft and radii concentric around B0 W B0 A0 P1 D1 User direction of feed R Bending radius User direction of feed AM08852v1 DS7248 - Rev 3 page 16/27 STD2N62K3, STF2N62K3, STU2N62K3 DPAK (TO-252) packing information Figure 27. DPAK (TO-252) reel outline T 40mm min. access hole at slot location B D C N A G measured at hub Tape slot in core for tape start 2.5mm min.width Full radius AM06038v1 Table 12. DPAK (TO-252) tape and reel mechanical data Tape Dim. mm mm Dim. Min. Max. A0 6.8 7 A B0 10.4 10.6 B 1.5 12.1 C 12.8 1.6 D 20.2 G 16.4 50 B1 DS7248 - Rev 3 Reel Min. Max. 330 13.2 D 1.5 D1 1.5 E 1.65 1.85 N F 7.4 7.6 T K0 2.55 2.75 P0 3.9 4.1 Base qty. 2500 P1 7.9 8.1 Bulk qty. 2500 P2 1.9 2.1 R 40 T 0.25 0.35 W 15.7 16.3 18.4 22.4 page 17/27 STD2N62K3, STF2N62K3, STU2N62K3 TO-220FP package information 4.5 TO-220FP package information Figure 28. TO-220FP package outline 7012510_Rev_12_B DS7248 - Rev 3 page 18/27 STD2N62K3, STF2N62K3, STU2N62K3 TO-220FP package information Table 13. TO-220FP package mechanical data Dim. mm Min. Max. A 4.4 4.6 B 2.5 2.7 D 2.5 2.75 E 0.45 0.7 F 0.75 1 F1 1.15 1.70 F2 1.15 1.70 G 4.95 5.2 G1 2.4 2.7 H 10 10.4 L2 DS7248 - Rev 3 Typ. 16 L3 28.6 30.6 L4 9.8 10.6 L5 2.9 3.6 L6 15.9 16.4 L7 9 9.3 Dia 3 3.2 page 19/27 STD2N62K3, STF2N62K3, STU2N62K3 IPAK (TO-251) type A package information 4.6 IPAK (TO-251) type A package information Figure 29. IPAK (TO-251) type A package outline 0068771_IK_typeA_rev14 DS7248 - Rev 3 page 20/27 STD2N62K3, STF2N62K3, STU2N62K3 IPAK (TO-251) type A package information Table 14. IPAK (TO-251) type A package mechanical data Dim. mm Min. Typ. A 2.20 2.40 A1 0.90 1.10 b 0.64 0.90 b2 b4 0.95 5.20 B5 5.40 0.30 c 0.45 0.60 c2 0.48 0.60 D 6.00 6.20 E 6.40 6.60 e e1 2.28 4.40 H DS7248 - Rev 3 Max. 4.60 16.10 L 9.00 9.40 L1 0.80 1.20 L2 0.80 V1 10° 1.00 page 21/27 STD2N62K3, STF2N62K3, STU2N62K3 IPAK (TO-251) type C package information 4.7 IPAK (TO-251) type C package information Figure 30. IPAK (TO-251) type C package outline 0068771_IK_typeC_rev14 DS7248 - Rev 3 page 22/27 STD2N62K3, STF2N62K3, STU2N62K3 IPAK (TO-251) type C package information Table 15. IPAK (TO-251) type C package mechanical data Dim. mm Min. Typ. Max. A 2.20 2.30 2.35 A1 0.90 1.00 1.10 b 0.66 0.79 b2 DS7248 - Rev 3 0.90 b4 5.23 5.33 5.43 c 0.46 0.59 c2 0.46 0.59 D 6.00 6.10 6.20 D1 5.20 5.37 5.55 E 6.50 6.60 6.70 E1 4.60 4.78 4.95 e 2.20 2.25 2.30 e1 4.40 4.50 4.60 H 16.18 16.48 16.78 L 9.00 9.30 9.60 L1 0.80 1.00 1.20 L2 0.90 1.08 1.25 θ1 3° 5° 7° θ2 1° 3° 5° page 23/27 STD2N62K3, STF2N62K3, STU2N62K3 Ordering information 5 Ordering information Table 16. Order codes Order code Marking STD2N62K3 STF2N62K3 STU2N62K3 DS7248 - Rev 3 2N62K3 Package Packing DPAK Tape and reel TO-220FP IPAK Tube page 24/27 STD2N62K3, STF2N62K3, STU2N62K3 Revision history Table 17. Document revision history Date Version 31-May-2011 1 Changes First release Added new package: D²PAK 20-Mar-2012 2 – Table 1: Device summary, Section 4: Package mechanical data and Section 5: Packaging mechanical data have been modified. Minor text changes. The part numbers STB2N62K3 and STP2N62K3 have been moved to a separate datasheet. Removed maturity status indication from cover page. The document status is production data. 04-Jun-2018 3 Updated title and features in cover page. Updated Section 1 Electrical ratings, Section 2 Electrical characteristics, Section 2.1 Electrical characteristics curves and Section 4 Package information. Minor text changes. DS7248 - Rev 3 page 25/27 STD2N62K3, STF2N62K3, STU2N62K3 Contents Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 2 Electrical characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.1 Electrical characteristics curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 4 Package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 5 4.1 DPAK (TO-252) type A package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 4.2 DPAK (TO-252) type C package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 4.3 DPAK (TO-252) type E package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 4.4 DPAK (TO-252) packing information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 4.5 TO-220FP package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 4.6 IPAK (TO-251) type A package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 4.7 IPAK (TO-251) type C package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 DS7248 - Rev 3 page 26/27 STD2N62K3, STF2N62K3, STU2N62K3 IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2018 STMicroelectronics – All rights reserved DS7248 - Rev 3 page 27/27