STB36NF06L, STP36NF06L
Datasheet
Automotive-grade N-channel 60 V, 32 mΩ typ., 30 A STripFET II Power MOSFET
in a D²PAK and TO-220 packages
Features
TAB
TAB
1
3
D2PAK
TO-220
1
2
Order codes
VDS
RDS(on) max.
ID
STB36NF06LT4
60 V
40 mΩ
30 A
STP36NF06L
60 V
40 mΩ
30 A
3
D(2, TAB)
•
•
•
•
AEC-Q101 qualified
Exceptional dv/dt capability
100% avalanche tested
Low gate charge
Applications
•
G(1)
Switching applications
Description
S(3)
AM01475v1_noZen
This Power MOSFET has been developed using STMicroelectronics' unique
STripFET process, which is specifically designed to minimize input capacitance and
gate charge. This renders the device suitable for use as primary switch in advanced
high-efficiency isolated DC-DC converters for telecom and computer applications,
and applications with low gate charge driving requirements.
Product status links
STB36NF06L
STP36NF06L
Product summary
Order code
STB36NF06LT4
Marking
B36NF06
Package
D²PAK
Packing
Tape and reel
Order code
STP36NF06L
Marking
P36NF06L
Package
TO-220
Packing
Tube
DS3365 - Rev 4 - October 2022
For further information contact your local STMicroelectronics sales office.
www.st.com
STB36NF06L, STP36NF06L
Electrical ratings
1
Electrical ratings
Table 1. Absolute maximum ratings
Symbol
Parameter
Value
Unit
VDS
Drain-source voltage (VGS = 0 V)
60
V
VDGR
Drain-gate voltage (RGS = 20 kΩ)
60
V
Gate-source voltage
±18
V
Drain current (continuous) at TC = 25 °C
30
Drain current (continuous) at TC = 100 °C
21
IDM(1)
Drain current (pulsed)
120
A
PTOT
Total power dissipation at TC = 25 °C
70
W
0.47
W/°C
VGS
ID
Derating factor
A
dv/dt(2)
Peak diode recovery voltage slope
10
V/ns
EAS(3)
Single-pulse avalanche energy
225
mJ
Tstg
TJ
Storage temperature range
Operating junction temperature range
-55 to 175
°C
°C
1. Pulse width limited by safe operating area.
2. ISD ≤ 30 A, di/dt ≤ 400 A/μs, VDD ≤ V(BR)DSS, TJ ≤ TJ max.
3. Starting TJ = 25 °C, ID = 15 A, VDD = 30 V.
Table 2. Thermal data
Symbol
Value
Unit
RthJC
Thermal resistance, junction-to-case
2.14
°C/W
RthJA
Thermal resistance, junction-to-ambient
62.5
°C/W
Maximum lead temperature for soldering purpose
300
°C
Tl
DS3365 - Rev 4
Parameter
page 2/17
STB36NF06L, STP36NF06L
Electrical characteristics
2
Electrical characteristics
TC = 25 °C unless otherwise specified.
Table 3. On/off states
Symbol
V(BR)DSS
Parameter
Test conditions
Drain-source breakdown voltage
VGS = 0 V, ID = 250 μA
Min.
Typ.
Max.
60
V
VGS = 0 V, VDS = 60 V
1
VGS = 0 V, VDS = 60 V, TC = 125 °C
10
IDSS
Zero gate voltage drain current
IGSS
Gate body leakage current
VDS = 0 V, VGS = ±18 V
VGS(th)
Gate threshold voltage
VDS = VGS, ID = 250 µA
RDS(on)
Static drain-source on-resistance
Unit
1.0
µA
±100
nA
2.5
V
VGS = 10 V, ID = 15 A
32
40
VGS = 5 V, ID = 15 A
45
50
Min.
Typ.
Max.
-
15
S
-
660
pF
-
170
pF
-
70
pF
-
13
-
4.2
nC
-
7.8
nC
Min.
Typ.
Max.
Unit
mΩ
Table 4. Dynamic
Symbol
Parameter
gfs
Forward transconductance
Ciss
Input capacitance
Coss
Output capacitance
Crss
Reverse transfer capacitance
Qg
Total gate charge
Qgs
Gate-source charge
Qgd
Gate-drain charge
Test conditions
VDS = 15 V, ID = 15 A
VDS = 25 V, f = 1 MHz, VGS = 0 V
VDD = 30 V, ID = 30 A, VGS = 5 V
(see Figure 13. Test circuit for gate
charge behavior)
17
Unit
nC
Table 5. Switching times
Symbol
td(on)
tr
td(off)
tf
DS3365 - Rev 4
Parameter
Test conditions
Turn-on delay time
VDD = 30 V, ID = 15 A,
-
10
-
ns
Rise time
RG = 4.7 Ω, VGS = 5 V
-
80
-
ns
Turn-off delay time
(see Figure 12. Test circuit for
resistive load switching times and
Figure 17. Switching time waveform)
-
19
-
ns
-
13
-
ns
Fall time
page 3/17
STB36NF06L, STP36NF06L
Electrical characteristics
Table 6. Source-drain diode
Symbol
ISD
ISDM
(1)
VSD(2)
Parameter
Test conditions
Min.
Typ.
Max.
Unit
Source-drain current
-
30
A
Source-drain current (pulsed)
-
120
A
1.5
V
Forward on voltage
ISD = 24 A, VGS = 0 V
-
trr
Reverse recovery time
ISD = 20 A, di/dt = 100 A/µs,
-
55
ns
Qrr
Reverse recovery charge
VDD = 20 V, TJ = 150 °C
-
107
nC
IRRM
Reverse recovery current
(see Figure 14. Test circuit for inductive
load switching and diode recovery times)
-
3.9
A
1. Pulse width limited by safe operating area.
2. Pulsed: pulse duration = 300 µs, duty cycle 1.5%.
DS3365 - Rev 4
page 4/17
STB36NF06L, STP36NF06L
Electrical characteristics (curves)
2.1
Electrical characteristics (curves)
Figure 1. Safe operating area
HV15530
Figure 3. Output characteristics
HV15450
Figure 5. Trasconductance
HV15460
DS3365 - Rev 4
Figure 2. Thermal impedance
280TOC
Figure 4. Transfer characteristics
HV15455
Figure 6. Static drain-source on-resistance
HV15470
page 5/17
STB36NF06L, STP36NF06L
Electrical characteristics (curves)
Figure 7. Gate charge vs gate-source voltage
Figure 8. Capacitance variations
HV15490
HV15480
Figure 9. Normalized gate threshold voltage vs
temperature
Figure 10. Normalized on-resistance vs temperature
HV15510
HV15500
Figure 11. Normalized V(BR)DSS vs temperature
HV15520
DS3365 - Rev 4
page 6/17
STB36NF06L, STP36NF06L
Test circuits
3
Test circuits
Figure 12. Test circuit for resistive load switching times
Figure 13. Test circuit for gate charge behavior
VDD
12 V
2200
+ μF
3.3
μF
VDD
VD
VGS
1 kΩ
100 nF
RL
IG= CONST
VGS
RG
47 kΩ
+
pulse width
D.U.T.
2.7 kΩ
2200
μF
pulse width
D.U.T.
100 Ω
VG
47 kΩ
1 kΩ
AM01469v1
AM01468v1
Figure 14. Test circuit for inductive load switching and
diode recovery times
D
G
A
D.U.T.
S
25 Ω
A
A
L
100 µH
fast
diode
B
B
B
G
RG
VD
3.3
µF
D
+
Figure 15. Unclamped inductive load test circuit
1000
+ µF
2200
+ µF
VDD
3.3
µF
VDD
ID
D.U.T.
S
_
D.U.T.
Vi
pulse width
AM01470v1
AM01471v1
Figure 16. Unclamped inductive waveform
Figure 17. Switching time waveform
ton
V(BR)DSS
td(on)
toff
td(off)
tr
tf
VD
90%
90%
IDM
VDD
VDD
VGS
0
AM01472v1
DS3365 - Rev 4
10%
0
ID
VDS
10%
90%
10%
AM01473v1
page 7/17
STB36NF06L, STP36NF06L
Package information
4
Package information
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages,
depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product
status are available at: www.st.com. ECOPACK is an ST trademark.
4.1
TO-220 type A package information
Figure 18. TO-220 type A package outline
0015988_typeA_Rev_23
DS3365 - Rev 4
page 8/17
STB36NF06L, STP36NF06L
TO-220 type A package information
Table 7. TO-220 type A package mechanical data
Dim.
mm
Min.
Max.
A
4.40
4.60
b
0.61
0.88
b1
1.14
1.55
c
0.48
0.70
D
15.25
15.75
D1
1.27
E
10.00
10.40
e
2.40
2.70
e1
4.95
5.15
F
1.23
1.32
H1
6.20
6.60
J1
2.40
2.72
L
13.00
14.00
L1
3.50
3.93
L20
16.40
L30
28.90
øP
3.75
3.85
Q
2.65
2.95
Slug flatness
DS3365 - Rev 4
Typ.
0.03
0.10
page 9/17
STB36NF06L, STP36NF06L
D²PAK (TO-263) type A package information
4.2
D²PAK (TO-263) type A package information
Figure 19. D²PAK (TO-263) type A package outline
0079457_26
DS3365 - Rev 4
page 10/17
STB36NF06L, STP36NF06L
D²PAK (TO-263) type A package information
Table 8. D²PAK (TO-263) type A package mechanical data
Dim.
mm
Min.
Max.
A
4.40
4.60
A1
0.03
0.23
b
0.70
0.93
b2
1.14
1.70
c
0.45
0.60
c2
1.23
1.36
D
8.95
9.35
D1
7.50
7.75
8.00
D2
1.10
1.30
1.50
E
10.00
E1
8.30
8.50
8.70
E2
6.85
7.05
7.25
e
10.40
2.54
e1
4.88
5.28
H
15.00
15.85
J1
2.49
2.69
L
2.29
2.79
L1
1.27
1.40
L2
1.30
1.75
R
V2
DS3365 - Rev 4
Typ.
0.40
0°
8°
page 11/17
STB36NF06L, STP36NF06L
D²PAK (TO-263) type A package information
Figure 20. D²PAK (TO-263) recommended footprint (dimensions are in mm)
0079457_Rev26_footprint
DS3365 - Rev 4
page 12/17
STB36NF06L, STP36NF06L
D²PAK packing information
4.3
D²PAK packing information
Figure 21. D²PAK tape outline
DS3365 - Rev 4
page 13/17
STB36NF06L, STP36NF06L
D²PAK packing information
Figure 22. D²PAK reel outline
T
40mm min.
access hole
at slot location
B
D
C
N
A
G measured
at hub
Tape slot
in core for
tape start
2.5mm min.width
Full radius
AM06038v1
Table 9. D²PAK tape and reel mechanical data
Tape
Dim.
DS3365 - Rev 4
Reel
mm
mm
Dim.
Min.
Max.
Min.
Max.
A0
10.5
10.7
A
B0
15.7
15.9
B
1.5
D
1.5
1.6
C
12.8
D1
1.59
1.61
D
20.2
E
1.65
1.85
G
24.4
F
11.4
11.6
N
100
K0
4.8
5.0
T
P0
3.9
4.1
P1
11.9
12.1
Base quantity
1000
P2
1.9
2.1
Bulk quantity
1000
R
50
T
0.25
0.35
W
23.7
24.3
330
13.2
26.4
30.4
page 14/17
STB36NF06L, STP36NF06L
Revision history
Table 10. Document revision history
Date
Version
Changes
14-Jun-2003
1
First release.
13-Mar-2006
2
Complete version.
26-Jun-2006
3
New template, no content change.
Updated title, Internal schematic, Device summary, Features and Description on cover page.
07-Oct-2022
4
Updated Section 4 Package information.
Minor text changes.
DS3365 - Rev 4
page 15/17
STB36NF06L, STP36NF06L
Contents
Contents
1
Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
2
Electrical characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.1
Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3
Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
4
Package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
4.1
TO-220 type A package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
4.2
D²PAK (TO-263) type A package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4.3
D²PAK packing information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
DS3365 - Rev 4
page 16/17
STB36NF06L, STP36NF06L
IMPORTANT NOTICE – READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST
products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST
products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgment.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of
purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. For additional information about ST trademarks, refer to www.st.com/trademarks. All other product or service names
are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2022 STMicroelectronics – All rights reserved
DS3365 - Rev 4
page 17/17