STB55NF06T4

STB55NF06, STP55NF06, STP55NF06FP N-channel 60 V, 0.015 Ω, 50 A STripFET™ II Power MOSFET in D²PAK, TO-220 and TO-220FP packages Datasheet — production data Features TAB TAB Order code VDSS RDS(on) max. 60 V < 0.018 Ω STB55NF06 STP55NF06 ID 50 A 3 1 50 A (1) STP55NF06FP 1 3 2 D2PAK TO-220 1. Refer to soa for the max allowable current value on FP-type due to Rth value ■ 100% avalanche tested ■ Exceptional dv/dt capability 3 1 TO-220FP Applications ■ 2 Switching application Figure 1. Internal schematic diagram Description These Power MOSFETs have been developed using STMicroelectronics’ unique STripFET process, which is specifically designed to minimize input capacitance and gate charge. This renders the devices suitable for use as primary switch in advanced high-efficiency isolated DCDC converters for telecom and computer applications, and applications with low gate charge driving requirements. $OR4!" ' 3 !-V Table 1. Device summary Order code Marking Package Packaging STB55NF06 B55NF06 D²PAK Tape and reel STP55NF06 P55NF06 TO-220 STP55NF06FP P55NF06FP TO-220 Tube May 2012 This is information on a product in full production. Doc ID 7544 Rev 11 1/19 www.st.com 19 Contents STB55NF06, STP55NF06, STP55NF06FP Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................. 6 3 Test circuit 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 5 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 2/19 ................................................ 9 Doc ID 7544 Rev 11 STB55NF06, STP55NF06, STP55NF06FP 1 Electrical ratings Electrical ratings Table 2. Absolute maximum ratings Value Symbol Parameter Unit TO-220, D2PAK TO-220FP VDS Drain-source voltage 60 VGS Gate- source voltage ± 20 ID Drain current (continuous) at TC = 25 °C ID Drain current (continuous) at TC = 100 °C IDM(2) Ptot V 50 (1) A (1) 50 35 35 A Drain current (pulsed) 200 200(1) A Total dissipation at TC = 25 °C 110 30 W Derating factor 0.73 0.20 W/°C EAS (3) Single pulse avalanche energy dv/dt (4) Peak diode recovery voltage slope VISO Insulation withstand voltage (DC) Tstg Storage temperature Tj V 340 mJ 7 V/ns 2500 -55 to 175 V °C Max. operating junction temperature 1. Refer to soa for the max allowable current value on FP-type due to Rth value 2. Pulse width limited by safe operating area. 3. Starting Tj = 25 °C, VDD = 30 V, ID =25 A 4. ISD ≤50 A, di/dt ≤400 A/µs, VDD ≤V(BR)DSS, Tj ≤TJMAX Table 3. Thermal data Value Symbol Parameter Rthj-case Thermal resistance junction-case max Rthj-amb Thermal resistance junction-ambient max Doc ID 7544 Rev 11 D2PAK Unit TO-220 1.36 TO-220FP 5 62.5 °C/W °C/W 3/19 Electrical characteristics 2 STB55NF06, STP55NF06, STP55NF06FP Electrical characteristics (TCASE=25°C unless otherwise specified) Table 4. Symbol Parameter V(BR)DSS Drain-source breakdown voltage ID = 250 µA, VGS =0 IDSS Zero gate voltage drain current (VGS = 0) VDS = 60 V VDS = 60 V,@ TJ= 125 °C IGSS Gate-body leakage current (VDS = 0) VGS = ± 20 V VGS(th) Gate threshold voltage VDS = VGS, ID = 250 µA RDS(on) Static drain-source on-resistance VGS = 10 V, ID = 27.5 A Table 5. Symbol 4/19 On/off states Test conditions Min. Typ. Max. 60 2 Unit V 3 1 10 µA µA ±100 nA 4 V 0.015 0.018 Ω Dynamic Parameter Test conditions Min. Typ. - 1300 300 105 pF pF pF ns ns ns ns Ciss Coss Crss Input capacitance Output capacitance Reverse transfer capacitance VDS = 25 V, f = 1MHz, VGS = 0 td(on) tr td(off) tf Turn-on delay time Rise time Turn-off delay time Fall time VDD = 30 V, ID = 27.5 A RG = 4.7 Ω VGS = 10 V (see Figure 15) - 20 50 36 15 Qg Qgs Qgd Total gate charge Gate-source charge Gate-drain charge VDD = 48 V, ID = 55 A, VGS = 10 V (see Figure 16) - 44.5 10.5 17.5 Doc ID 7544 Rev 11 Max. 60 Unit nC nC nC STB55NF06, STP55NF06, STP55NF06FP Table 6. Symbol Electrical characteristics Source drain diode Parameter Test conditions ISDM (1) Source-drain current Source-drain current (pulsed) VSD (2) Forward on voltage ISD trr Qrr IRRM ISD = 50 A, VGS = 0 ISD = 50 A, Reverse recovery time di/dt = 100 A/µs, Reverse recovery charge VDD = 30 V, Tj = 150 °C Reverse recovery current (see Figure 17) Min. Max. Unit - 50 200 A A - 1.5 V - Typ. 75 170 4.5 ns nC A 1. Pulse width limited by safe operating area. 2. Pulsed: Pulse duration = 300 µs, duty cycle 1.5% Doc ID 7544 Rev 11 5/19 Electrical characteristics STB55NF06, STP55NF06, STP55NF06FP 2.1 Electrical characteristics (curves) Figure 2. Safe operating area for TO-220, D²PAK Figure 3. Thermal impedance for TO-220, D²PAK Figure 4. Safe operating area for TO-220FP Figure 5. Thermal impedance TO-220FP Figure 6. Output characterisics Figure 7. Transfer characteristics 6/19 Doc ID 7544 Rev 11 STB55NF06, STP55NF06, STP55NF06FP Figure 8. Electrical characteristics Transconductance Figure 9. Static drain-source on-resistance Figure 10. Gate charge vs gate-source voltage Figure 11. Capacitance variations Figure 12. Normalized gate threshold voltage vs temperature Figure 13. Normalized on-resistance vs temperature Doc ID 7544 Rev 11 7/19 Electrical characteristics STB55NF06, STP55NF06, STP55NF06FP Figure 14. Source-drain diode forward characteristics 8/19 Doc ID 7544 Rev 11 STB55NF06, STP55NF06, STP55NF06FP 3 Test circuit Test circuit Figure 15. Switching times test circuit for resistive load Figure 16. Gate charge test circuit VDD 12V 47kΩ 1kΩ 100nF 3.3 μF 2200 RL μF VGS IG=CONST VDD 100Ω Vi=20V=VGMAX VD RG 2200 μF D.U.T. D.U.T. VG 2.7kΩ PW 47kΩ 1kΩ PW AM01468v1 AM01469v1 Figure 17. Test circuit for inductive load Figure 18. Unclamped inductive load test switching and diode recovery times circuit A A D.U.T. FAST DIODE B B L A D G VD L=100μH S 3.3 μF B 25 Ω 1000 μF D VDD 2200 μF 3.3 μF VDD ID G RG S Vi D.U.T. Pw AM01470v1 Figure 19. Unclamped inductive waveform AM01471v1 Figure 20. Switching time waveform ton V(BR)DSS tdon VD toff tr tdoff tf 90% 90% IDM 10% ID VDD 10% 0 VDD VDS 90% VGS AM01472v1 0 Doc ID 7544 Rev 11 10% AM01473v1 9/19 Package mechanical data 4 STB55NF06, STP55NF06, STP55NF06FP Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. Table 7. D²PAK (TO-263) mechanical data mm Dim. Min. Typ. A 4.40 4.60 A1 0.03 0.23 b 0.70 0.93 b2 1.14 1.70 c 0.45 0.60 c2 1.23 1.36 D 8.95 9.35 D1 7.50 E 10 E1 8.50 10.40 e 2.54 e1 4.88 5.28 H 15 15.85 J1 2.49 2.69 L 2.29 2.79 L1 1.27 1.40 L2 1.30 1.75 R V2 10/19 Max. 0.4 0° 8° Doc ID 7544 Rev 11 STB55NF06, STP55NF06, STP55NF06FP Package mechanical data Figure 21. D²PAK (TO-263) drawing 0079457_T Figure 22. D²PAK footprint(a) 16.90 12.20 5.08 1.60 3.50 9.75 Footprint a. All dimensions are in millimeters Doc ID 7544 Rev 11 11/19 Package mechanical data Table 8. STB55NF06, STP55NF06, STP55NF06FP TO-220 type A mechanical data mm Dim. Min. Typ. A 4.40 4.60 b 0.61 0.88 b1 1.14 1.70 c 0.48 0.70 D 15.25 15.75 D1 12/19 Max. 1.27 E 10 10.40 e 2.40 2.70 e1 4.95 5.15 F 1.23 1.32 H1 6.20 6.60 J1 2.40 2.72 L 13 14 L1 3.50 3.93 L20 16.40 L30 28.90 ∅P 3.75 3.85 Q 2.65 2.95 Doc ID 7544 Rev 11 STB55NF06, STP55NF06, STP55NF06FP Package mechanical data Figure 23. TO-220 type A drawing 0015988_typeA_Rev_S Doc ID 7544 Rev 11 13/19 Package mechanical data Table 9. STB55NF06, STP55NF06, STP55NF06FP TO-220FP mechanical data mm Dim. Min. Typ. A 4.4 4.6 B 2.5 2.7 D 2.5 2.75 E 0.45 0.7 F 0.75 1 F1 1.15 1.70 F2 1.15 1.70 G 4.95 5.2 G1 2.4 2.7 H 10 10.4 L2 14/19 Max. 16 L3 28.6 30.6 L4 9.8 10.6 L5 2.9 3.6 L6 15.9 16.4 L7 9 9.3 Dia 3 3.2 Doc ID 7544 Rev 11 STB55NF06, STP55NF06, STP55NF06FP Package mechanical data Figure 24. TO-220FP drawing 7012510_Rev_K_B Doc ID 7544 Rev 11 15/19 Packaging mechanical data 5 STB55NF06, STP55NF06, STP55NF06FP Packaging mechanical data Table 10. D²PAK (TO-263) tape and reel mechanical data Tape Reel mm mm Dim. 16/19 Dim. Min. Max. A0 10.5 10.7 A B0 15.7 15.9 B 1.5 D 1.5 1.6 C 12.8 D1 1.59 1.61 D 20.2 E 1.65 1.85 G 24.4 F 11.4 11.6 N 100 K0 4.8 5.0 T P0 3.9 4.1 P1 11.9 12.1 Base qty 1000 P2 1.9 2.1 Bulk qty 1000 R 50 T 0.25 0.35 W 23.7 24.3 Doc ID 7544 Rev 11 Min. Max. 330 13.2 26.4 30.4 STB55NF06, STP55NF06, STP55NF06FP Packaging mechanical data Figure 25. Tape 10 pitches cumulative tolerance on tape +/- 0.2 mm T P0 Top cover tape P2 D E F W K0 B0 A0 P1 D1 User direction of feed R Bending radius User direction of feed AM08852v2 Figure 26. Reel T REEL DIMENSIONS 40mm min. Access hole At sl ot location B D C N A Full radius Tape slot in core for tape start 25 mm min. width G measured at hub AM08851v2 Doc ID 7544 Rev 11 17/19 Revision history 6 STB55NF06, STP55NF06, STP55NF06FP Revision history Table 11. Document revision history Date Revision 19-Oct-2005 7 Preliminary document 02-Dec-2005 8 New datasheet according to PCN MLD-PMT/05/1115 28-Mar-2006 9 Inserted ecopack indication 26-Jun-2006 10 New template, no content change 11 Removed part number STB55NF06-1 in I²PAK package Section 4: Package mechanical data and Section 5: Packaging mechanical data have been updated Minor text changes 25-May-2012 18/19 Changes Doc ID 7544 Rev 11 STB55NF06, STP55NF06, STP55NF06FP Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2012 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com Doc ID 7544 Rev 11 19/19