STB5N62K3

STD5N62K3, STF5N62K3 STP5N62K3, STU5N62K3 Datasheet N-channel 620 V, 1.28 Ω typ., 4.2 A MDmesh™ K3 Power MOSFETs in DPAK, TO-220FP, TO-220 and IPAK packages Features TAB 1 2 3 Order code DPAK 1 2 3 STF5N62K3 STP5N62K3 TAB TAB TO-220 1 2 IPAK 1 2 ID • • • • • Package DPAK 620 V 1.6 Ω STU5N62K3 3 D(2, TAB) RDS(on)max. STD5N62K3 TO-220FP 3 VDS 4.2 A TO-220FP TO-220 IPAK 100% avalanche tested Extremely high dv/dt capability Very low intrinsic capacitance Improved diode reverse recovery characteristics Zener-protected G(1) Applications • S(3) Product status link STD5N62K3 AM01475V1 Switching applications Description These MDmesh™ K3 Power MOSFETs are the result of improvements applied to STMicroelectronics’ MDmesh™ technology, combined with a new optimized vertical structure. These devices boast an extremely low on-resistance, superior dynamic performance and high avalanche capability, rendering them suitable for the most demanding applications. STF5N62K3 STP5N62K3 STU5N62K3 DS6792 - Rev 3 - September 2018 For further information contact your local STMicroelectronics sales office. www.st.com STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3 Electrical ratings 1 Electrical ratings Table 1. Absolute maximum ratings Value Symbol Parameter DPAK, TO-220, IPAK Unit TO-220FP VDS Drain-source voltage 620 VGS Gate-source voltage ±30 V V ID Drain current (continuous) at TC = 25 °C 4.2 ID Drain current (continuous) at TC = 100 °C 3 3 (1) A 16.8 16.8 (1) A 70 25 W IDM (2) Drain current (pulsed) PTOT Total dissipation at TC = 25 °C 4.2 (1) A dv/dt (3) Peak diode recovery voltage slope 12 V/ns di/dt (3) Diode reverse recovery current slope 400 A/ns VISO Insulation withstand voltage (RMS) from all three leads to external heat sink 2.5 kV (t = 1 s; TC = 25 °C) Tj Tstg Operating junction temperature range -55 to 150 Storage temperature range °C 1. Limited by maximum junction temperature. 2. Pulse width limited by safe operating area. 3. ISD ≤ 4.2 A, VDSpeak ≤ V(BR)SS, VDD = 80% V(BR)DSS. Table 2. Thermal data Symbol Value Parameter DPAK TO-220 Rthj-case Thermal resistance junction-case 1.79 Rthj-amb Thermal resistance junction-ambient 62.5 Rthj-pcb (1) Thermal resistance junction-pcb IPAK 100 Unit TO-220FP 5 °C/W 62.5 °C/W 50 °C/W 1. When mounted on 1inch² FR-4 board, 2 oz Cu. Table 3. Avalanche characteristics Symbol IAR(1) (2) EAS Parameter Value Unit Avalanche current, repetitive or not-repetitive 4.2 A Single pulse avalanche energy 120 mJ 1. Pulse width limited by Tj max. 2. Starting Tj = 25 °C, ID = IAR, VDD = 50 V. DS6792 - Rev 3 page 2/27 STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3 Electrical characteristics 2 Electrical characteristics (TCASE = 25 °C unless otherwise specified) Table 4. On/off states Symbol V(BR)DSS Parameter Drain-source breakdown voltage Test conditions Min. ID = 1 mA, VGS = 0 V Typ. 620 Zero gate voltage drain current IGSS Gate body leakage current VDS = 0 V, VGS = ±20 V VGS(th) Gate threshold voltage VDS = VGS, ID = 50 µA RDS(on) Static drain-source onresistance VGS = 10 V, ID = 2.1 A VGS = 0 V, VDS = 620 V, TC = 125 °C 1 µA 50 µA ±10 µA 3.75 4.5 V 1.28 1.6 Ω Typ. Max. Unit - pF (1) 3 Unit V VGS = 0 V, VDS = 620 V IDSS Max. 1. Defined by design, not subject to production test. Table 5. Dynamic Symbol Parameter Test conditions Min. Ciss Input capacitance Coss Output capacitance Crss Reverse transfer capacitance Coss eq. (1) Equivalent output capacitance VDS = 0 to 496 V, VGS = 0 V - 16.6 - pF RG Intrinsic gate resistance f = 1 MHz open drain - 4 - Ω Qg Total gate charge Qgs Gate-source charge - nC Qgd Gate-drain charge 680 VDS = 50 V, f = 1 MHz, VGS = 0 V - 50 8 VDD = 496 V, ID = 4.2 A, VGS = 0 to 10 V (see Figure 19. Test circuit for gate charge behavior) 26 - 4 16 1. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0 to 80% VDSS Table 6. Switching times Symbol td(on) tr td(off) tf DS6792 - Rev 3 Parameter Test conditions Turn-on delay time VDD = 310 V, ID = 4.2 A, Rise time RG = 4.7 Ω, VGS = 10 V Turn-off delay time (see Figure 18. Test circuit for resistive load switching times and Figure 23. Switching time waveform) Fall time Min. Typ. Max. Unit - ns 12 - 8 40 21 page 3/27 STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3 Electrical characteristics Table 7. Source-drain diode Symbol Parameter Test conditions ISD Source-drain current ISDM (1) Source-drain current (pulsed) VSD (2) Forward on voltage ISD = 4.2 A, VGS = 0 V trr Reverse recovery time ISD = 4.2 A, di/dt = 100 A/µs Qrr Reverse recovery charge IRRM Reverse recovery current VDD = 60 V (see Figure 20. Test circuit for inductive load switching and diode recovery times) trr Reverse recovery time ISD = 4.2 A, di/dt = 100 A/µs Qrr Reverse recovery charge IRRM Reverse recovery current VDD = 60 V, Tj = 150 °C (see Figure 20. Test circuit for inductive load switching and diode recovery times) Min. Typ. Max. Unit 4.2 - 16.8 - - - 1.5 A V 290 ns 1.9 μC 13 A 320 ns 2.2 μC 14 A 1. Pulse width limited by safe operating area. 2. Pulsed: pulse duration = 300 μs, duty cycle 1.5%. Table 8. Gate-source Zener diode Symbol V(BR)GSO Parameter Gate-source breakdown voltage Test conditions IGS = ±1 mA, ID = 0 A Min. ±30 Typ. Max. - Unit V The built-in back-to-back Zener diodes are specifically designed to enhance the ESD performance of the device. The Zener voltage facilitates efficient and cost-effective device integrity protection, thus eliminating the need for additional external componentry. DS6792 - Rev 3 page 4/27 STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3 Electrical characteristics (curves) 2.1 Electrical characteristics (curves) Figure 1. Safe operating area for DPAK and IPAK AM08240v1 Tj=150°C Tc=25°C Single pulse ID (A) S( on D 100 100µs 10-2 100 100 1ms 10ms 10-1 10-1 GC20460 K 10µs ) O p Li era m ti ite on d i by n m this ax a R rea is 101 Figure 2. Thermal impedance for DPAK and IPAK 101 102 10-2 10-5 VDS(V) Figure 3. Safe operating area for TO-220FP AM08241v1 Tj=150°C Tc=25°C Single pulse ID (A) 10-1 10-4 10-3 10-2 10-1 tp (s) Figure 4. Thermal impedance for TO-220FP K GC20940 ) S( on 10µs 10 -1 D Li per m at ite ion d in by t m his ax ar R ea is 101 100µs 1ms O 100 10ms 10-1 10-2 10-1 101 100 102 10 -2 10 -3 10 -4 VDS(V) Figure 5. Safe operating area for TO-220 10 -3 10 -2 10 -1 10 0 t p (s) Figure 6. Thermal impedance for TO-220 AM08239v1 ID (A) Tj=150°C Tc=25°C Single pulse 101 ) on D S( O Li pe m ra ite tio d n by in m th ax is R are a is 10µs 100µs 10 0 1ms 10ms 10 -1 10 -2 10 -1 DS6792 - Rev 3 10 0 10 1 10 2 V DS(V) page 5/27 STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3 Electrical characteristics (curves) Figure 7. Output characterisics Figure 8. Transfer characteristics AM08243v1 ID (A) AM08244v1 ID (A) V DS =15 V 7 10 V GS =10V 7V 6 8 5 6 4 3 4 6V 2 2 1 5V 0 5 0 10 20 15 25 V DS(V) Figure 9. Normalized V(BR)DSS vs temperature AM08596v1 V(BR) DSS (norm) 0 2 0 4 1.10 V GS(V) Figure 10. Static drain-source on-resistance AM08246v1 RDS(on) (Ω) V GS =10V 1.38 V GS = 0 V 8 6 1.36 I D = 1 mA 1.34 1.05 1.32 1.30 1.00 1.28 0.95 1.26 1.24 0.90 -75 -25 25 75 125 TJ(°C) 1.22 2.0 1.0 Figure 11. Gate charge vs gate-source voltage AM08245v1 VDS (V) V GS (V) V DS 12 V DD =496V I D =4.2A 3.0 4.0 I D (A) Figure 12. Capacitance variations AM08247v1 C (pF) 500 1000 10 Ciss 400 8 300 100 6 Coss 200 4 10 0 0 DS6792 - Rev 3 Crss 100 2 5 10 15 20 25 30 0 Q g(nC) 1 0.1 1 10 100 VDS(V) page 6/27 STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3 Electrical characteristics (curves) Figure 14. Normalized on-resistance vs temperature Figure 13. Normalized gate threshold voltage vs temperature AM08249v1 VGS(th) AM08250v1 RDS(on) (norm) (norm) 1.10 I D =50 µA VGS=10 V 2.5 1.00 2.0 1.5 0.90 1.0 0.80 0.5 0.70 -75 -25 25 75 0 -75 TJ(°C) 125 Figure 15. Source-drain diode forward characteristics 25 -25 75 125 Figure 16. Maximum avalanche energy vs temperature AM08597v1 VSD (V) EAS (mJ) 130 120 110 100 90 80 70 60 50 40 30 20 10 0 0 TJ=-50°C 1.0 0.9 0.8 TJ=25°C 0.7 TJ=150°C 0.6 0.5 0.4 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 TJ(°C) ISD(A) AM08598v1 ID=4.2 A VDD=50 V 20 40 60 80 100 120 140 TJ(°C) Figure 17. Output capacitance stored energy AM08248v1 Eoss (µJ) 4 3 2 1 0 0 DS6792 - Rev 3 100 200 300 400 500 VDS(V) page 7/27 STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3 Test circuits 3 Test circuits Figure 18. Test circuit for resistive load switching times Figure 19. Test circuit for gate charge behavior VDD 12 V 2200 + μF 3.3 μF VDD VD VGS 1 kΩ 100 nF RL IG= CONST VGS RG 47 kΩ + pulse width D.U.T. 2.7 kΩ 2200 μF pulse width D.U.T. 100 Ω VG 47 kΩ 1 kΩ AM01469v1 AM01468v1 Figure 20. Test circuit for inductive load switching and diode recovery times D G A D.U.T. S 25 Ω A L A B B 3.3 µF D G + VD 100 µH fast diode B Figure 21. Unclamped inductive load test circuit RG 1000 + µF 2200 + µF VDD 3.3 µF VDD ID D.U.T. S D.U.T. Vi _ pulse width AM01471v1 AM01470v1 Figure 23. Switching time waveform Figure 22. Unclamped inductive waveform ton V(BR)DSS td(on) VD toff td(off) tr tf 90% 90% IDM VDD 10% 0 ID VDD AM01472v1 VGS 0 VDS 10% 90% 10% AM01473v1 DS6792 - Rev 3 page 8/27 STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3 Package information 4 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. DS6792 - Rev 3 page 9/27 STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3 DPAK (TO-252) type A package information 4.1 DPAK (TO-252) type A package information Figure 24. DPAK (TO-252) type A package outline 0068772_A_25 DS6792 - Rev 3 page 10/27 STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3 DPAK (TO-252) type A package information Table 9. DPAK (TO-252) type A mechanical data Dim. mm Min. Max. A 2.20 2.40 A1 0.90 1.10 A2 0.03 0.23 b 0.64 0.90 b4 5.20 5.40 c 0.45 0.60 c2 0.48 0.60 D 6.00 6.20 D1 4.95 E 6.40 E1 4.60 4.70 4.80 e 2.159 2.286 2.413 e1 4.445 4.572 4.699 H 9.35 10.10 L 1.00 1.50 (L1) 2.60 2.80 3.00 L2 0.65 0.80 0.95 L4 0.60 R V2 DS6792 - Rev 3 Typ. 5.10 5.25 6.60 1.00 0.20 0° 8° page 11/27 STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3 DPAK (TO-252) type C2 package information 4.2 DPAK (TO-252) type C2 package information Figure 25. DPAK (TO-252) type C2 package outline 0068772_C2_25 DS6792 - Rev 3 page 12/27 STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3 DPAK (TO-252) type C2 package information Table 10. DPAK (TO-252) type C2 mechanical data Dim. mm Min. Typ. Max. A 2.20 2.30 2.38 A1 0.90 1.01 1.10 A2 0.00 0.10 b 0.72 0.85 b4 5.13 c 0.47 0.60 c2 0.47 0.60 D 6.00 D1 5.10 E 6.50 E1 5.20 e 2.186 2.286 2.386 H 9.80 10.10 10.40 L 1.40 1.50 1.70 L1 L2 6.20 5.60 6.60 6.70 5.50 0.90 1.25 0.51 BSC 0.60 L6 DS6792 - Rev 3 6.10 5.46 2.90 REF L3 L4 5.33 0.80 1.00 1.80 BSC θ1 5° 7° 9° θ2 5° 7° 9° V2 0° 8° page 13/27 STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3 DPAK (TO-252) type E package information 4.3 DPAK (TO-252) type E package information Figure 26. DPAK (TO-252) type E package outline 0068772_type-E_rev.25 DS6792 - Rev 3 page 14/27 STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3 DPAK (TO-252) type E package information Table 11. DPAK (TO-252) type E mechanical data Dim. A mm Min. Typ. Max. 2.18 2.39 A2 0.13 b 0.65 0.884 b4 4.95 5.46 c 0.46 0.61 c2 0.46 0.60 D 5.97 6.22 D1 5.21 E 6.35 E1 4.32 6.73 e 2.286 e1 4.572 H 9.94 10.34 L 1.50 1.78 L1 L2 2.74 0.89 L4 1.27 1.02 Figure 27. DPAK (TO-252) recommended footprint (dimensions are in mm) FP_0068772_25 DS6792 - Rev 3 page 15/27 STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3 DPAK (TO-252) packing information 4.4 DPAK (TO-252) packing information Figure 28. DPAK (TO-252) tape outline 10 pitches cumulative tolerance on tape +/- 0.2 mm T P0 Top cover tape P2 D E F B1 K0 For machine ref. only including draft and radii concentric around B0 W B0 A0 P1 D1 User direction of feed R Bending radius User direction of feed AM08852v1 DS6792 - Rev 3 page 16/27 STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3 DPAK (TO-252) packing information Figure 29. DPAK (TO-252) reel outline T 40mm min. access hole at slot location B D C N A G measured at hub Tape slot in core for tape start 2.5mm min.width Full radius AM06038v1 Table 12. DPAK (TO-252) tape and reel mechanical data Tape Dim. mm mm Dim. Min. Max. A0 6.8 7 A B0 10.4 10.6 B 1.5 12.1 C 12.8 1.6 D 20.2 G 16.4 50 B1 DS6792 - Rev 3 Reel Min. Max. 330 13.2 D 1.5 D1 1.5 E 1.65 1.85 N F 7.4 7.6 T K0 2.55 2.75 P0 3.9 4.1 Base qty. 2500 P1 7.9 8.1 Bulk qty. 2500 P2 1.9 2.1 R 40 T 0.25 0.35 W 15.7 16.3 18.4 22.4 page 17/27 STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3 TO-220FP package information 4.5 TO-220FP package information Figure 30. TO-220FP package outline 7012510_Rev_12_B DS6792 - Rev 3 page 18/27 STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3 TO-220FP package information Table 13. TO-220FP package mechanical data Dim. mm Min. Max. A 4.4 4.6 B 2.5 2.7 D 2.5 2.75 E 0.45 0.7 F 0.75 1 F1 1.15 1.70 F2 1.15 1.70 G 4.95 5.2 G1 2.4 2.7 H 10 10.4 L2 DS6792 - Rev 3 Typ. 16 L3 28.6 30.6 L4 9.8 10.6 L5 2.9 3.6 L6 15.9 16.4 L7 9 9.3 Dia 3 3.2 page 19/27 STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3 TO-220 type A package information 4.6 TO-220 type A package information Figure 31. TO-220 type A package outline 0015988_typeA_Rev_21 DS6792 - Rev 3 page 20/27 STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3 TO-220 type A package information Table 14. TO-220 type A package mechanical data Dim. mm Min. Max. A 4.40 4.60 b 0.61 0.88 b1 1.14 1.55 c 0.48 0.70 D 15.25 15.75 D1 DS6792 - Rev 3 Typ. 1.27 E 10.00 10.40 e 2.40 2.70 e1 4.95 5.15 F 1.23 1.32 H1 6.20 6.60 J1 2.40 2.72 L 13.00 14.00 L1 3.50 3.93 L20 16.40 L30 28.90 øP 3.75 3.85 Q 2.65 2.95 page 21/27 STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3 IPAK (TO-251) type A package information 4.7 IPAK (TO-251) type A package information Figure 32. IPAK (TO-251) type A package outline 0068771_IK_typeA_rev14 DS6792 - Rev 3 page 22/27 STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3 IPAK (TO-251) type A package information Table 15. IPAK (TO-251) type A package mechanical data Dim. mm Min. Typ. A 2.20 2.40 A1 0.90 1.10 b 0.64 0.90 b2 b4 0.95 5.20 B5 5.40 0.30 c 0.45 0.60 c2 0.48 0.60 D 6.00 6.20 E 6.40 6.60 e e1 2.28 4.40 H DS6792 - Rev 3 Max. 4.60 16.10 L 9.00 9.40 L1 0.80 1.20 L2 0.80 V1 10° 1.00 page 23/27 STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3 Ordering information 5 Ordering information Table 16. Order codes Order code Marking STD5N62K3 STF5N62K3 STP5N62K3 STU5N62K3 DS6792 - Rev 3 5N62K3 Package Packing DPAK Tape and reel TO-220FP TO-220 Tube IPAK page 24/27 STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3 Revision history Table 17. Document revision history Date Version 09-Apr-2010 1 Changes First release – Added new package, mechanical data: IPAK; 20-Oct-2010 2 – Added new package, mechanical data: D²PAK; – Document status promoted from preliminary data to datasheet. The part number STB5N62K3 has been moved to a separate datasheet. Removed maturity status indication from cover page. The document status is production data. 24-Sep-2018 3 Updated title, features and description on cover page. Updated Section 1 Electrical ratings, Section 2 Electrical characteristics and Section 4 Package information. Minor text changes. DS6792 - Rev 3 page 25/27 STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3 Contents Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 2 Electrical characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.1 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 4 Package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 5 4.1 DPAK (TO-252) type A package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 4.2 DPAK (TO-252) type C2 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 4.3 DPAK (TO-252) type E package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 4.4 DPAK (TO-252) packing information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 4.5 TO-220FP package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 4.6 TO-220 type A package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 4.7 IPAK (TO-251) type A package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 DS6792 - Rev 3 page 26/27 STD5N62K3, STF5N62K3, STP5N62K3, STU5N62K3 IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2018 STMicroelectronics – All rights reserved DS6792 - Rev 3 page 27/27