STC04IE170HP

STC04IE170HP Monolithic emitter switched bipolar transistor ESBT® 1700 V - 4 A - 0.17 Ω Features VCS(ON) IC RCS(ON) 0.7 V 4A 0.17 Ω ■ High voltage / high current cascode configuration ■ Low equivalent ON resistance ■ Very fast-switch, up to 150 kHz ■ Squared RBSOA, up to 1700 V ■ Very low CISS driven by RG = 47 Ω ■ Very low turn-off cross over time TO247-4L HP Figure 1. Internal schematic diagrams Application ■ Aux SMPS for three-phase mains Description The STC04IE170HP is manufactured in Monolithic ESBT technology, aimed at providing the best performance in high frequency / high voltage applications. It is designed for use in gate driven based topologies. Table 1. Device summary Order code Marking Package Packing STC04IE170HP C04IE170HP TO247-4L HP Tube June 2009 Doc ID 12716 Rev 3 1/9 www.st.com 9 Electrical ratings 1 Electrical ratings Table 2. Absolute maximum ratings Symbol Parameter Value Unit 1700 V VCS(SS) Collector-source voltage (VBS = VGS = 0) VBS(OS) Base-source voltage (IC = 0, VGS = 0) 30 V VSB(OS) Source-base voltage (IC = 0, VGS = 0) 17 V ± 17 V Collector current 4 A Collector peak current (tP < 5 ms) 8 A Base current 4 A IBM Base peak current (tP < 1 ms) 8 A Ptot Total dissipation at Tc ≤ 25°C 50 W Tstg Storage temperature -40 to 150 °C 150 °C Value Unit 2.5 °C/W VGS IC ICM IB TJ Table 3. Symbol RthJC 2/9 STC04IE170HP Gate-source voltage Max. operating junction temperature Thermal data Parameter Thermal resistance junction-case Doc ID 12716 Rev 3 STC04IE170HP 2 Electrical characteristics Electrical characteristics (Tcase = 25 °C unless otherwise specified) Table 4. Symbol Electrical characteristics Parameter Test conditions Min. Typ. Max. Unit ICS(SS) Collector cut-off current VCS = 1700 V (VBS = VGS = 0) 100 µA IBS(OS) Base cut-off current (IC = 0, VGS = 0) VBS = 30 V 10 µA ISB(OS) Source cut-off current (IC = 0, VGS = 0) VSB = 17 V 100 µA IGS(OS) Gate-source leakage current (VBS = 0) VGS = ± 17V 100 nA VCS(ON) Collector-source ON voltage VGS = 10 V IC = 4 A IB = 0.8 A VGS = 10 V IC = 1.5 A IB = 0.15 A 1.5 1.4 V V hFE (1) DC current gain VCS = 1 V VGS = 10 V IC = 4 A VCS = 1 V VGS = 10 V IC = 1.5 A VBS(ON) Base-source ON voltage IB = 0.8 A VGS = 10 V IC = 4 A VGS = 10 V IC = 1.5 A IB = 0.15 A 1.3 0.9 1.5 1.1 V V VGS(th) Gate threshold voltage VBS = VGS IB = 250 µA 3 4 V Input capacitance (VGS = VCB = 0) VCS = 25 V f = 1 MHz Gate-source charge (VCB = 0) VGS = 10 V ts tf Inductive load Storage time Fall time VGS = 10 V VClamp = 1360 V IC = 2 A ts tf Inductive load Storage time Fall time VGS = 10 V VClamp = 1360V IC = 2 A VCS(dyn) Collector-source dynamic voltage (0.5 µs) VCS(dyn) Ciss QGS(tot) VCSW 0.7 0.6 4 7 2 5.5 11 510 pF 3.9 nC RG = 47 Ω tp = 4 µs IB = 0.4 A 770 10 ns ns RG = 47 Ω tp = 4 µs IB = 0.2 A 410 10 ns ns VCC = VClamp = 400 V IC = 1.5 A VGS = 10 V tpeak = 500 ns IB = 0.3 A IBpeak = 3 A (2 IC) RG = 47 Ω 5.36 V Collector-source dynamic voltage (1 µs) VCC = VClamp = 400 V IC = 1.5 A VGS = 10 V tpeak =500 ns IB = 0.3 A IBpeak = 3 A (2IC) RG = 47 Ω 4.32 V Maximum collectorsource voltage at turnoff without snubber RG = 47 Ω hFE = 5 IC = 4 A 1700 V 1. Pulsed duration = 300 µs, duty cycle ≤ 1.5%. Doc ID 12716 Rev 3 3/9 Electrical characteristics 2.1 4/9 STC04IE170HP Electrical characteristics (curves) Figure 2. Output characteristics Figure 3. Collector-source dynamic voltage Figure 4. DC current gain Figure 5. Gate threshold voltage vs temperature Figure 6. Collector-source ON voltage (hFE = 5) Figure 7. Collector-source ON voltage (hFE = 10) Doc ID 12716 Rev 3 STC04IE170HP Figure 8. Electrical characteristics Base-source ON voltage (hFE = 5) Figure 9. Base-source ON voltage (hFE = 10) Figure 10. Inductive load switching time Figure 11. Inductive load switching time (hFE = 5) (hFE = 10) Figure 12. Reverse biased safe operating area Doc ID 12716 Rev 3 5/9 Package mechanical data 3 STC04IE170HP Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. 6/9 Doc ID 12716 Rev 3 STC04IE170HP Package mechanical data TO247-4L HP mechanical data DIM. A A1 A2 A3 b b1 b2 c D D1 E e e1 L L1 L2 L3 øP S mm. TYP 5.65 3.15 1.92 3.18 1.10 MIN. 5.50 2.85 0.95 1.10 2.50 0.40 23.85 24 21.50 15.60 2.54 5.08 15.45 10.20 2.20 2.50 18.50 3 3.55 MAX. 5.80 3.25 1.30 1.50 2.90 0.80 24.15 15.75 10.80 2.80 3.65 5.50 7908765A Doc ID 12716 Rev 3 7/9 Revision history 4 STC04IE170HP Revision history Table 5. 8/9 Document revision history Date Revision Changes 27-Sep-2006 1 First release. 21-Nov-2006 2 Improved application target. 17-Jun-2009 3 Updated Figure 2 on page 4 and mechanical data. Doc ID 12716 Rev 3 STC04IE170HP Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2009 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com Doc ID 12716 Rev 3 9/9