STC08DE150HP

STC08DE150HP Hybrid emitter switched bipolar transistor ESBT® 1500 V - 8 A - 0.075 Ω Features VCS(ON) IC RCS(ON) 0.6 V 8A 0.075 Ω ■ Low equivalent ON resistance ■ Very fast-switching: up to 150 kHz ■ Squared RBSOA: up to 1500 V ■ Very low CISS driven by RG = 47 Ω o r P TO247-4L HP Single switch SMPS based on three-phase mains ) s t( Description c u d e t e Application ■ ) s t( l o s b O - Figure 1. Internal schematic diagrams c u d The STC08DE150HP is manufactured in a hybrid structure, using dedicated high voltage bipolar and low voltage MOSFET technologies, aimed at providing the best performance in an ESBT topology. e t le o r P The STC08DE150HP is designed for use in auxiliary flyback SMPS for any three-phase application. o s b O Table 1. Device summary Order code Marking Package Packing STC08DE150HP C08DE150HP TO247-4L HP Tube June 2009 Doc ID 12830 Rev 2 1/9 www.st.com 9 Electrical ratings 1 STC08DE150HP Electrical ratings Table 2. Absolute maximum ratings Symbol Parameter Unit 1500 V VCS(SS) Collector-source voltage (VBS = VGS = 0) VBS(OS) Base-source voltage (IC = 0, VGS = 0) 30 V VSB(OS) Source-base voltage (IC = 0, VGS = 0) 9 V VGS IC ICM IB Collector current 8 Collector peak current (tP < 5 ms) 15 Base peak current (tP < 1 ms) Ptot Total dissipation at Tc ≤ 25 °C Tstg Storage temperature ) s t( Symbol RthJC b O - Parameter uc Thermal resistance junction-case d o r e t e l o s Max. operating junction temperature Thermal data V ct u d o Base current Table 3. ) s ( ± 20 Gate-source voltage IBM TJ P e et l o s Ob 2/9 Value Doc ID 12830 Rev 2 Pr 8 A A A 15 A 42 W -40 to 150 °C 125 °C Value Unit 2.4 °C/W STC08DE150HP 2 Electrical characteristics Electrical characteristics (Tcase = 25 °C unless otherwise specified) Table 4. Electrical characteristics Symbol Parameter Typ. Max. Unit µA Collector cut-off current VCS = 1500 V (VBS = VGS = 0) 100 IBS(OS) Base cut-off current (IC = 0, VGS = 0) VBS = 30 V 10 ISB(OS) Source cut-off current (IC = 0, VGS = 0) VSB = 9 V IGS(OS) Gate-source leakage current (VBS = 0) VGS = ± 20 V VCS(ON) Collector-source ON voltage VGS = 10 V VGS = 10 V hFE (1) DC current gain IC = 8 A IC = 5 A VBS(ON) Base-source ON voltage VGS = 10 V VGS = 10 V IC = 8 A IC = 5 A VGS(th) Gate threshold voltage VBS = VGS IB = 250 µA VCS = 25 V f = 1 MHz ) (s t c u Input capacitance (VGS = VCB = 0) od ) s ( t c u IB = 1.6 A IB = 0.5 A t e l o VCS = 1 V VCS = 1 V s b O VGS = 10 V VGS = 10 V 100 µA 500 nA 1.4 V V 1.5 1 2 V V 2.2 3 V d o r eP IC = 8 A IC = 5 A 0.6 0.6 4.5 8 IB = 1.6 A IB = 0.5 A 1.5 µA 7.5 10 750 pF 12.5 nC Gate-source charge (VCB = 0) VGS = 10 V IC = 8 A VCS = 25 V ts tf Inductive load Storage time Fall time VGS = 10 V VClamp = 1200 V IC = 5 A RG = 47 Ω tp = 4 µs IB = 0.5 A 526 8.5 ns ns ts tf Inductive load Storage time Fall time VGS = 10 V VClamp = 1200 V IC = 5 A RG = 47 Ω tp = 4 µs IB = 1 A 884 16 ns ns Maximum collectorsource voltage at turnoff without snubber RG = 47 Ω VCS(dyn) Collector-source dynamic voltage (0.5 µs) VCC = VClamp = 300 V IC = 4 A VGS = 10 V tpeak = 500 ns IB = 0.8 A IBpeak = 8 A (2IC) RG = 47 Ω 6 V VCS(dyn) Collector-source dynamic voltage (1 µs) VCC = VClamp = 300 V IC = 4 A VGS = 10 V tpeak = 500 ns IB = 0.8 A RG = 47 Ω IBpeak = 8 A (2IC) 2.2 V QGS(tot) r P e t e l o O Min. ICS(SS) Ciss bs Test conditions VCSW hFE = 5 IC = 8 A 1500 V 1. Pulsed duration = 300 µs, duty cycle ≤ 1.5%. Doc ID 12830 Rev 2 3/9 Electrical characteristics 2.1 STC08DE150HP Electrical characteristics (curves) Figure 2. Output characteristics Figure 3. Collector-source dynamic voltage ) s t( c u d Figure 4. DC current gain Figure 5. o r P Gate threshold voltage vs. temperature e t le o s b O ) s ( t c u d o let r P e Figure 6. o s b Collector-source ON voltage (hFE = 5) Figure 7. O 4/9 Doc ID 12830 Rev 2 Collector-source ON voltage (hFE = 10) STC08DE150HP Figure 8. Electrical characteristics Base-source ON voltage (hFE = 5) Figure 9. Base-source ON voltage (hFE = 10) ) s t( c u d Figure 10. Inductive load switching time Figure 11. Inductive load switching time (hFE = 5) (hFE = 10) e t le o r P o s b O ) s ( t c u d o r P e Figure 12. Reverse biased safe operating area t e l o s b O Doc ID 12830 Rev 2 5/9 Package mechanical data 3 STC08DE150HP Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. ) s t( c u d e t le o s b O ) s ( t c u d o r P e t e l o s b O 6/9 Doc ID 12830 Rev 2 o r P STC08DE150HP Package mechanical data TO247-4L HP mechanical data DIM. mm. TYP 5.65 3.15 1.92 3.18 1.10 MIN. 5.50 2.85 A A1 A2 A3 b b1 b2 c D D1 E e e1 L L1 L2 L3 øP S 0.95 1.10 2.50 0.40 23.85 24 21.50 15.60 2.54 5.08 15.45 10.20 2.20 2.50 18.50 3 e t le 3.55 o s b MAX. 5.80 3.25 1.30 1.50 2.90 0.80 24.15 ) s t( c u d 15.75 o r P 10.80 2.80 3.65 5.50 O ) s ( t c u d o r P e t e l o s b O 7908765A Doc ID 12830 Rev 2 7/9 Revision history 4 STC08DE150HP Revision history Table 5. Document revision history Date Revision Changes 26-Oct-2006 1 First release. 15-Jun-2009 2 Document status promoted from preliminary data to datasheet. ) s t( c u d e t le o s b O ) s ( t c u d o r P e t e l o s b O 8/9 Doc ID 12830 Rev 2 o r P STC08DE150HP ) s t( Please Read Carefully: c u d Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. e t le o r P Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. o s b No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. O ) s ( t c UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. u d o UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. r P e t e l o s b O Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2009 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com Doc ID 12830 Rev 2 9/9