STD127DT4

STD127DT4 High voltage fast-switching NPN power transistor Datasheet - production data Features • NPN transistor • High voltage capability TAB • Low spread of dynamic parameters • Minimum lot-to-lot spread for reliable operation 3 1 • Very high switching speed • Integrated anti-parallel collector - emitter diode DPAK Applications • Electronic ballast for fluorescent lighting • Fly back and forward single transistor low power converters Figure 1. Internal schematic diagram Description C (2 or tab) This device is manufactured using high voltage multi epitaxial planar technology for high switching speeds and medium voltage capability. It uses a cellular emitter structure with planar edge termination to enhance switching speeds while maintaining the wide RBSOA. The device is designed for use in lighting applications and low cost switch-mode power supplies. B (1) E (3) Table 1. Device summary Part number Marking Package Packaging STD127DT4 D127D DPAK Tape and reel November 2013 This is information on a product in full production. DocID025553 Rev 1 1/14 www.st.com Contents STD127DT4 Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 5 Packing mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 2/14 DocID025553 Rev 1 STD127DT4 1 Electrical ratings Electrical ratings Table 2. Absolute maximum ratings Symbol Parameter Value Unit VCES Collector-emitter voltage (VBE = 0) 700 V VCEO Collector-emitter voltage (IB = 0) 400 V VEBO Emitter-base voltage (IC = 0; IB = 2 A, tp < 10 μs, TJ = 150 °C) V(BR)EBO V Collector current 4 A Collector peak current (tP < 5 ms) 8 A Base current 2 A IBM Base peak current (tP < 5 ms) 4 A Ptot Total dissipation at Tc ≤ 25 °C 35 W Tstg Storage temperature -65 to 150 °C TJ Max. operating junction temperature 150 °C Value Unit IC ICM IB Table 3. Thermal data Symbol Parameter RthJC Thermal resistance junction-case max 3.57 °C/W RthJA Thermal resistance junction-ambient max 100 °C/W DocID025553 Rev 1 3/14 14 Electrical characteristics 2 STD127DT4 Electrical characteristics (Tcase = 25°C unless otherwise specified) Table 4. Electrical characteristics Symbol Parameter Test conditions Typ. Max. Unit ICBO Collector cut-off current (VBE =0) VCE = 700 V 100 μA ICEO Collector cut-off current (IB =0) VCE = 400 V 250 μA 18 V V(BR)EBO Emitter - base breakdown IE =10 mA voltage (IC = 0) 9 VCEO(sus)(1) Collector-emitter I =100 mA sustaining voltage (IB = 0) C VCE(sat) (1) Collector-emitter saturation voltage IC = 1 A IC = 4 A _ _ IB = 0.2 A _ IB = 1 A 0.3 1.3 V V VBE(sat) (1) Base-emitter saturation voltage IC = 1 A _ 1.2 V DC current gain IC = 10 mA IC = 1 A IC = 4 A VF Diode forward voltage IF = 2 A ts tf Inductive load Storage time Fall time IC = 2 A IB(on)= 0.4 A VBE(off) = -5 V; RBB(off) =0 VCC = 200 V L = 200 μH hFE (1) 1. Pulsed duration = 300 μs, duty cycle ≤ 1.5%. 4/14 Min. DocID025553 Rev 1 400 V _IB = 0.2 A VCE = 5 V VCE = 5 V VCE = 5 V 7 10 5 25 40 2.5 0.6 0.1 V μs ns STD127DT4 2.1 Electrical characteristics Electrical characteristics (curves) Figure 2. Reverse biased safe operating area GIPG191120131118FSR IC (A) Figure 3. DC current gain GIPG191120131135FSR hfe VCE= 5V 30 6 25 4 Vbe(off)= - 5V hfe= 5 Rbb(off)= 0 VCE= 1V 20 15 2 10 0 0 400 200 600 VCE(V) Figure 4. Collector-emitter saturation voltage GIPG191120131153FSR VCE(sat) (V) 0.3 5 0.001 1 IC(A) Figure 5. Base-emitter saturation voltage GIPG191120131159FSR VBE(sat) (V) 0.9 hfe= 5 0.2 0.8 0.15 0.7 0.1 0.6 0.01 0.1 1 IC(A) Figure 6. Base-emitter on-voltage GIPG191120131207FSR VBE(on) (V) 0.5 0.001 hfe= 5 0.01 0.1 1 IC(A) Figure 7. Diode forward voltage vs collector current GIPG191120131324FSR VFEC (V) 1.15 0.9 0.85 1.05 VCE= 5V 0.8 0.95 0.75 0.85 0.7 0.75 0.65 0.01 0.1 1 0.25 0.05 0.001 0.01 0.1 1 IC(A) 0.65 0.01 DocID025553 Rev 1 0.1 1 IF(A) 5/14 14 Electrical characteristics STD127DT4 Figure 8. Resistive load switching time GIPG191120131331FSR t (ns) Figure 9. Inductive load switching time GIPG191120131348FSR t (ns) tstorage tstorage 1000 Vclamp = 200 V, hfe = 5 Vbe(off) = -5 V, Rbb(off) = 0 100 tr 100 tf tf td 10 0.5 6/14 Vcc = 125 V, hfe = 5 Vbe(off) = -5 V, Ib(on) = -Ib(off) 1 1.5 2 2.5 IC(A) 10 0 DocID025553 Rev 1 2 4 6 IC(A) STD127DT4 3 Test circuits Test circuits Figure 10. Inductive load switching test circuit 1. Fast electronic switch 2. Non-inductive resistor 3. Fast recovery rectifier Figure 11. Resistive load switching test circuit DocID025553 Rev 1 7/14 14 Package mechanical data 4 STD127DT4 Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. Table 5. DPAK (TO-252) type C mechanical data mm Dim. 8/14 Min. Typ. Max. A 2.20 2.30 2.38 A1 0.90 1.01 1.10 A2 0.00 0.10 b 0.72 0.85 b4 5.13 c 0.47 0.60 c2 0.47 0.60 D 6.00 D1 5.25 E 6.50 E1 4.70 e 5.33 5.46 6.10 6.20 6.60 6.70 2.186 2.286 2.386 H 9.80 10.10 10.40 L 1.40 1.50 1.70 L2 0.90 L4 0.60 0.80 1.00 Θ1 5° 7° 9° Θ2 5° 7° 9° V2 0° 1.25 8° DocID025553 Rev 1 STD127DT4 Package mechanical data Figure 12. DPAK (TO-252) type C drawing 0068772_M_type_C DocID025553 Rev 1 9/14 14 Package mechanical data STD127DT4 Figure 13. DPAK footprint (a) Footprint_REV_M_ a. All dimensions are in millimeters 10/14 DocID025553 Rev 1 STD127DT4 5 Packing mechanical data Packing mechanical data Table 6. DPAK (TO-252) tape and reel mechanical data Tape Reel mm mm Dim. Dim. Min. Max. A0 6.8 7 A B0 10.4 10.6 B 1.5 12.1 C 12.8 1.6 D 20.2 G 16.4 50 B1 Min. Max. 330 13.2 D 1.5 D1 1.5 E 1.65 1.85 N F 7.4 7.6 T K0 2.55 2.75 P0 3.9 4.1 Base qty. 2500 P1 7.9 8.1 Bulk qty. 2500 P2 1.9 2.1 R 40 T 0.25 0.35 W 15.7 16.3 DocID025553 Rev 1 18.4 22.4 11/14 14 Packing mechanical data STD127DT4 Figure 14. Tape for DPAK (TO-252) 10 pitches cumulative tolerance on tape +/- 0.2 mm T P0 Top cover tape P2 D E F B1 W K0 B0 For machine ref. only including draft and radii concentric around B0 A0 P1 D1 User direction of feed R Bending radius User direction of feed AM08852v1 Figure 15. Reel for DPAK (TO-252) T REEL DIMENSIONS 40mm min. Access hole At slot location B D C N A Full radius Tape slot in core for tape start 25 mm min. width G measured at hub AM08851v2 12/14 DocID025553 Rev 1 STD127DT4 6 Revision history Revision history Table 7. Document revision history Date Revision 19-Nov-2013 1 Changes Initial release. DocID025553 Rev 1 13/14 14 STD127DT4 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. ST PRODUCTS ARE NOT DESIGNED OR AUTHORIZED FOR USE IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFE SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B) AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR ENVIRONMENTS, AND/OR (D) AEROSPACE APPLICATIONS OR ENVIRONMENTS. WHERE ST PRODUCTS ARE NOT DESIGNED FOR SUCH USE, THE PURCHASER SHALL USE PRODUCTS AT PURCHASER’S SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN WRITING OF SUCH USAGE, UNLESS A PRODUCT IS EXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR “AUTOMOTIVE, AUTOMOTIVE SAFETY OR MEDICAL” INDUSTRY DOMAINS ACCORDING TO ST PRODUCT DESIGN SPECIFICATIONS. PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED ARE DEEMED SUITABLE FOR USE IN AEROSPACE BY THE CORRESPONDING GOVERNMENTAL AGENCY. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2013 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 14/14 DocID025553 Rev 1