STD17NF25

STD17NF25, STF17NF25, STP17NF25 Datasheet N-channel 250 V, 0.140 Ω typ., 17 A STripFET™ II Power MOSFETs in DPAK, TO-220FP and TO-220 packages Features TAB DPAK 2 3 1 Order code VDS RDS(on)max. ID 250 V 0.165 Ω 17 A PTOT TAB STD17NF25 TO-220FP 1 2 STF17NF25 3 TO-220 1 2 90 W 25 W 3 STP17NF25 • • • D(2, TAB) 90 W Exceptional dv/dt capability 100% avalanche tested Low gate charge G(1) Applications • S(3) Switching applications AM01475v1_noZen Description These Power MOSFETs have been developed using STMicroelectronics’ unique STripFET process, which is specifically designed to minimize input capacitance and gate charge. This renders the devices suitable for use as primary switch in advanced high-efficiency isolated DC-DC converters for telecom and computer applications, and applications with low gate charge driving requirements. Product status link STD17NF25 STF17NF25 STP17NF25 DS5089 - Rev 3 - May 2018 For further information contact your local STMicroelectronics sales office. www.st.com STD17NF25, STF17NF25, STP17NF25 Electrical ratings 1 Electrical ratings Table 1. Absolute maximum ratings Symbol Value Parameter TO-220, DPAK TO-220FP Unit VDS Drain-source voltage 250 V VGS Gate-source voltage ± 20 V ID Drain current (continuous) at TC = 25 °C ID Drain current (continuous) at TC = 100 °C IDM (2) PTOT dv/dt (3) VISO Tj Tstg 17 17 (1) A 10 10 (1) A 68 (1) A Drain current (pulsed) 68 Total dissipation at TC = 25 °C 90 25 Peak diode recovery voltage slope W 10 V/ns Insulation withstand voltage (RMS) from all three 2.5 leads to external heat sink (t = 1 s; Tc = 25 °C) Operating junction temperature range kV -55 to 150 Storage temperature range °C 1. Limited by maximum junction temperature. 2. Pulse width limited by safe operating area. 3. ISD ≤ 17 A, di/dt ≤ 200 A/μs, VDSpeak ≤ V(BR)DSS, VDD = 80% V(BR)DSS. Table 2. Thermal data Symbol Value Parameter Rthj-case Thermal resistance junction-case Rthj-amb Thermal resistance junction-ambient Rthj-pcb (1) Thermal resistance junction-pcb DPAK TO-220FP TO-220 1.38 5 1.38 62.5 Unit °C/W 50 1. When mounted on 1inch² FR-4, 2 Oz copper board. Table 3. Avalanche characteristics Symbol DS5089 - Rev 3 Parameter Value Unit IAR Avalanche current, repetitive or not-repetitive (pulse width limited by Tj Max) 17 A EAS Single pulse avalanche energy (starting Tj = 25 °C, ID = IAR, VDD = 50 V) 100 mJ page 2/24 STD17NF25, STF17NF25, STP17NF25 Electrical characteristics 2 Electrical characteristics (TCASE = 25 °C unless otherwise specified) Table 4. On/off states Symbol V(BR)DSS Parameter Drain-source breakdown voltage Test conditions Min. ID = 1 mA, VGS = 0 V Typ. 250 Zero gate voltage drain current IGSS Gate body leakage current VDS = 0 V, VGS = ±20 V VGS(th) Gate threshold voltage VDS = VGS, ID = 250 µA RDS(on) Static drain-source on resistance VGS = 10 V, ID = 8.5 A VGS = 0 V, VDS = 250 V, TC = 125 °C 1 µA 10 µA ±100 nA 3 4 V 0.140 0.165 Ω Typ. Max. Unit - pF (1) 2 Unit V VGS = 0 V, VDS = 250 V IDSS Max. 1. Defined by design, not subject to production test. Table 5. Dynamic Symbol Parameter Test conditions Min. Ciss Input capacitance Coss Output capacitance Crss Reverse transfer capacitance Coss eq. (1) Equivalent output capacitance VDS = 0 to 200 V, VGS = 0 V - 135 - pF Rg Gate input resistance f = 1 MHz, ID = 0 A - 2 - Ω Qg Total gate charge Qgs Gate-source charge - nC Qgd Gate-drain charge 1000 VDS = 25 V, f = 1 MHz, VGS = 0 V - 178 28 VDD = 200 V, ID = 17 A, VGS = 0 to 10 V (see Figure 15. Test circuit for gate charge behavior) 29.5 - 4.8 15.6 1. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0 to 80% VDSS. Table 6. Switching times Symbol td(on) tr td(off) tf DS5089 - Rev 3 Parameter Test conditions Turn-on delay time VDD = 125 V, ID = 8.5 A, Rise time RG = 4.7 Ω, VGS = 10 V Turn-off delay time (see Figure 14. Test circuit for resistive load switching times and Figure 19. Switching time waveform) Fall time Min. Typ. Max. Unit - ns 8.8 - 17.2 21 8.8 page 3/24 STD17NF25, STF17NF25, STP17NF25 Electrical characteristics Table 7. Source drain diode Symbol Parameter Test conditions ISD Source-drain current ISDM (1) Source-drain current (pulsed) VSD (2) Forward on voltage ISD = 17 A, VGS = 0 V trr Reverse recovery time ISD = 17 A, di/dt = 100 A/µs Qrr Reverse recovery charge IRRM Reverse recovery current VDD = 50 V (see Figure 16. Test circuit for inductive load switching and diode recovery times) trr Reverse recovery time ISD = 17 A, di/dt = 100 A/µs Qrr Reverse recovery charge IRRM Reverse recovery current VDD = 50 V (see Figure 16. Test circuit for inductive load switching and diode recovery times) Min. Typ. Max. Unit 17 - 68 - - - 1.6 A V 157 ns 0.91 μC 11.6 A 196 ns 1.34 μC 13.7 A 1. Pulse width limited by safe operating area. 2. Pulsed: pulse duration = 300 μs, duty cycle 1.5%. DS5089 - Rev 3 page 4/24 STD17NF25, STF17NF25, STP17NF25 Electrical characteristics curves 2.1 Electrical characteristics curves Figure 1. Safe operating area for DPAK, TO-220 Figure 2. Thermal impedance for DPAK, TO-220 Figure 3. Safe operating area for TO-220FP Figure 4. Thermal impedance for TO-220FP K GC20940 10 -1 10 -2 10 -3 10 -4 Figure 5. Output characterisics DS5089 - Rev 3 10 -3 10 -2 10 -1 10 0 t p (s) Figure 6. Transfer characteristics page 5/24 STD17NF25, STF17NF25, STP17NF25 Electrical characteristics curves Figure 7. Normalized V(BR)DSS vs temperature Figure 8. Static drain-source on resistance Figure 9. Gate charge vs gate-source voltage Figure 10. Capacitance variations Figure 11. Normalized gate threshold voltage vs temperature Figure 12. Normalized on resistance vs temperature DS5089 - Rev 3 page 6/24 STD17NF25, STF17NF25, STP17NF25 Electrical characteristics curves Figure 13. Source-drain diode forward characteristics DS5089 - Rev 3 page 7/24 STD17NF25, STF17NF25, STP17NF25 Test circuits 3 Test circuits Figure 14. Test circuit for resistive load switching times Figure 15. Test circuit for gate charge behavior VDD 12 V 2200 + μF 3.3 μF VDD VD VGS 1 kΩ 100 nF RL IG= CONST VGS RG 47 kΩ + pulse width D.U.T. 2.7 kΩ 2200 μF pulse width D.U.T. 100 Ω VG 47 kΩ 1 kΩ AM01469v1 AM01468v1 Figure 16. Test circuit for inductive load switching and diode recovery times D G A D.U.T. S 25 Ω A L A B B 3.3 µF D G + VD 100 µH fast diode B Figure 17. Unclamped inductive load test circuit RG 1000 + µF 2200 + µF VDD 3.3 µF VDD ID D.U.T. S D.U.T. Vi _ pulse width AM01471v1 AM01470v1 Figure 18. Unclamped inductive waveform Figure 19. Switching time waveform V(BR)DSS ton VD td(on) 90% IDM tf 90% 10% 10% 0 ID VDD toff td(off) tr VDD VGS 0 VDS 90% 10% AM01472v1 AM01473v1 DS5089 - Rev 3 page 8/24 STD17NF25, STF17NF25, STP17NF25 Package information 4 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. DS5089 - Rev 3 page 9/24 STD17NF25, STF17NF25, STP17NF25 DPAK (TO-252) type A2 package information 4.1 DPAK (TO-252) type A2 package information Figure 20. DPAK (TO-252) type A2 package outline 0068772_type-A2_rev25 DS5089 - Rev 3 page 10/24 STD17NF25, STF17NF25, STP17NF25 DPAK (TO-252) type A2 package information Table 8. DPAK (TO-252) type A2 mechanical data Dim. mm Min. Max. A 2.20 2.40 A1 0.90 1.10 A2 0.03 0.23 b 0.64 0.90 b4 5.20 5.40 c 0.45 0.60 c2 0.48 0.60 D 6.00 6.20 D1 4.95 E 6.40 E1 5.10 5.20 5.30 e 2.159 2.286 2.413 e1 4.445 4.572 4.699 H 9.35 10.10 L 1.00 1.50 L1 2.60 2.80 3.00 L2 0.65 0.80 0.95 L4 0.60 R V2 DS5089 - Rev 3 Typ. 5.10 5.25 6.60 1.00 0.20 0° 8° page 11/24 STD17NF25, STF17NF25, STP17NF25 DPAK (TO-252) type C2 package information 4.2 DPAK (TO-252) type C2 package information Figure 21. DPAK (TO-252) type C2 package outline 0068772_C2_25 DS5089 - Rev 3 page 12/24 STD17NF25, STF17NF25, STP17NF25 DPAK (TO-252) type C2 package information Table 9. DPAK (TO-252) type C2 mechanical data Dim. mm Min. Typ. Max. A 2.20 2.30 2.38 A1 0.90 1.01 1.10 A2 0.00 0.10 b 0.72 0.85 b4 5.13 c 0.47 0.60 c2 0.47 0.60 D 6.00 D1 5.10 E 6.50 E1 5.20 e 2.186 2.286 2.386 H 9.80 10.10 10.40 L 1.40 1.50 1.70 L1 L2 6.20 5.60 6.60 6.70 5.50 0.90 1.25 0.51 BSC 0.60 L6 DS5089 - Rev 3 6.10 5.46 2.90 REF L3 L4 5.33 0.80 1.00 1.80 BSC θ1 5° 7° 9° θ2 5° 7° 9° V2 0° 8° page 13/24 STD17NF25, STF17NF25, STP17NF25 DPAK (TO-252) type C2 package information Figure 22. DPAK (TO-252) recommended footprint (dimensions are in mm) FP_0068772_25 DS5089 - Rev 3 page 14/24 STD17NF25, STF17NF25, STP17NF25 DPAK (TO-252) packing information 4.3 DPAK (TO-252) packing information Figure 23. DPAK (TO-252) tape outline 10 pitches cumulative tolerance on tape +/- 0.2 mm T P0 Top cover tape P2 D E F B1 K0 For machine ref. only including draft and radii concentric around B0 W B0 A0 P1 D1 User direction of feed R Bending radius User direction of feed AM08852v1 DS5089 - Rev 3 page 15/24 STD17NF25, STF17NF25, STP17NF25 DPAK (TO-252) packing information Figure 24. DPAK (TO-252) reel outline T 40mm min. access hole at slot location B D C N A G measured at hub Tape slot in core for tape start 2.5mm min.width Full radius AM06038v1 Table 10. DPAK (TO-252) tape and reel mechanical data Tape Dim. mm mm Dim. Min. Max. A0 6.8 7 A B0 10.4 10.6 B 1.5 12.1 C 12.8 1.6 D 20.2 G 16.4 50 B1 DS5089 - Rev 3 Reel Min. Max. 330 13.2 D 1.5 D1 1.5 E 1.65 1.85 N F 7.4 7.6 T K0 2.55 2.75 P0 3.9 4.1 Base qty. 2500 P1 7.9 8.1 Bulk qty. 2500 P2 1.9 2.1 R 40 T 0.25 0.35 W 15.7 16.3 18.4 22.4 page 16/24 STD17NF25, STF17NF25, STP17NF25 TO-220FP package information 4.4 TO-220FP package information Figure 25. TO-220FP package outline 7012510_Rev_12_B DS5089 - Rev 3 page 17/24 STD17NF25, STF17NF25, STP17NF25 TO-220FP package information Table 11. TO-220FP package mechanical data Dim. mm Min. Max. A 4.4 4.6 B 2.5 2.7 D 2.5 2.75 E 0.45 0.7 F 0.75 1 F1 1.15 1.70 F2 1.15 1.70 G 4.95 5.2 G1 2.4 2.7 H 10 10.4 L2 DS5089 - Rev 3 Typ. 16 L3 28.6 30.6 L4 9.8 10.6 L5 2.9 3.6 L6 15.9 16.4 L7 9 9.3 Dia 3 3.2 page 18/24 STD17NF25, STF17NF25, STP17NF25 TO-220 type A package information 4.5 TO-220 type A package information Figure 26. TO-220 type A package outline 0015988_typeA_Rev_21 DS5089 - Rev 3 page 19/24 STD17NF25, STF17NF25, STP17NF25 TO-220 type A package information Table 12. TO-220 type A package mechanical data Dim. mm Min. Max. A 4.40 4.60 b 0.61 0.88 b1 1.14 1.55 c 0.48 0.70 D 15.25 15.75 D1 DS5089 - Rev 3 Typ. 1.27 E 10.00 10.40 e 2.40 2.70 e1 4.95 5.15 F 1.23 1.32 H1 6.20 6.60 J1 2.40 2.72 L 13.00 14.00 L1 3.50 3.93 L20 16.40 L30 28.90 øP 3.75 3.85 Q 2.65 2.95 page 20/24 STD17NF25, STF17NF25, STP17NF25 Ordering information 5 Ordering information Table 13. Order codes Order code Marking STD17NF25 STF17NF25 STP17NF25 DS5089 - Rev 3 17NF25 Package Packing DPAK Tape and reel TO-220FP TO-220 Tube page 21/24 STD17NF25, STF17NF25, STP17NF25 Revision history Table 14. Document revision history Date Version 01-Feb-2007 1 Changes First release. Minor text changes. 07-Nov-2012 2 The part number STI17NF25 has been moved to a separate datasheet. Section 4: Package mechanical data and Section 5: Packaging mechanical data have been updated. Removed maturity status indication from cover page. The document status is production data. 28-May-2018 3 Updated title in cover page, Section 1 Electrical ratings, Section 2 Electrical characteristics and Section 4 Package information. Minor text changes DS5089 - Rev 3 page 22/24 STD17NF25, STF17NF25, STP17NF25 Contents Contents 1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 2 Electrical characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.1 Electrical characteristics curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 4 Package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 5 4.1 DPAK (TO-252) type A2 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 4.2 DPAK (TO-252) type C2 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 4.3 DPAK (TO-252) packing information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 4.4 TO-220FP package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 4.5 TO-220 type A package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22 DS5089 - Rev 3 page 23/24 STD17NF25, STF17NF25, STP17NF25 IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2018 STMicroelectronics – All rights reserved DS5089 - Rev 3 page 24/24