STD30N6LF6AG
Automotive-grade N-channel 60 V, 19 mΩ typ., 24 A
STripFET™ F6 Power MOSFET in a DPAK package
Datasheet - production data
Features
Order code
VDS
RDS(on) max.
ID
PTOT
STD30N6LF6AG
60 V
25 mΩ
24 A
40 W
•
Figure 1: Internal schematic diagram
•
•
•
•
Designed for automotive applications and
AEC-Q101 qualified
Very low on-resistance
Very low gate charge
High avalanche ruggedness
Low gate drive power loss
Applications
D(2, TAB)
•
Switching applications
Description
This device is an N-channel Power MOSFET
developed using the STripFET™ F6 technology
with a new trench gate structure. The resulting
Power MOSFET exhibits very low RDS(on) in all
packages.
G(1)
S(3)
AM01475v1_Tab
Table 1: Device summary
Order code
Marking
Package
Packing
STD30N6LF6AG
30N6LF6
DPAK
Tape and Reel
June 2015
DocID028036 Rev 1
This is information on a product in full production.
1/15
www.st.com
Contents
STD30N6LF6AG
Contents
1
Electrical ratings ............................................................................. 3
2
Electrical characteristics ................................................................ 4
2.1
Electrical characteristics (curves) ...................................................... 6
3
Test circuits ..................................................................................... 8
4
Package information ....................................................................... 9
5
2/15
4.1
DPAK (TO-252) type A package information..................................... 9
4.2
DPAK (TO-252) packing information ............................................... 12
Revision history ............................................................................ 14
DocID028036 Rev 1
STD30N6LF6AG
1
Electrical ratings
Electrical ratings
Table 2: Absolute maximum ratings
Symbol
Parameter
Value
Unit
VDS
Drain-source voltage
60
V
VGS
Gate-source voltage
±20
V
Drain current (continuous) at Tcase = 25 °C
24
Drain current (continuous) at Tcase = 100 °C
17
IDM
Drain current (pulsed)
96
A
PTOT
Total dissipation at Tcase = 25 °C
40
W
(2)
EAS
Single pulse avalanche energy
130
mJ
-55 to 175
°C
Value
Unit
ID
(1)
Tstg
Storage temperature
Tj
Operating junction temperature
A
Notes:
(1)
(2)
Pulse width is limited by safe operating area.
starting Tj = 25 °C, ID = 24 A, VDD = 43.5 V.
Table 3: Thermal data
Symbol
Rthj-case
Rthj-pcb
(1)
Parameter
Thermal resistance junction-case
3.75
Thermal resistance junction-pcb
35
°C/W
Notes:
(1)
When mounted on a 1-inch² FR-4 board, 2 oz Cu.
DocID028036 Rev 1
3/15
Electrical characteristics
2
STD30N6LF6AG
Electrical characteristics
(Tcase = 25 °C unless otherwise specified)
Table 4: Static
Symbol
V(BR)DSS
Parameter
Test conditions
Drain-source breakdown
voltage
VGS = 0 V, ID = 250 µA
Min.
Typ.
Max.
60
Unit
V
VGS = 0 V, VDS = 60 V
1
VGS = 0 V, VDS = 60 V,
Tcase = 125 °C
100
±100
nA
2.5
V
IDSS
Zero gate voltage drain
current
IGSS
Gate-body leakage current
VDS = 0 V, VGS = ±20 V
VGS(th)
Gate threshold voltage
VDS = VGS, ID = 250 µA
RDS(on)
Static drain-source onresistance
VGS = 10 V, ID = 12 A
19
25
VGS = 4.5 V, ID = 12 A
24
30
Min.
Typ.
Max.
-
1320
-
-
88.5
-
-
58
-
1
µA
mΩ
Table 5: Dynamic
Symbol
Parameter
Ciss
Input capacitance
Coss
Output capacitance
Crss
Reverse transfer
capacitance
Qg
Total gate charge
Qgs
Gate-source charge
Qgd
Gate-drain charge
Test conditions
VDS = 25 V, f = 1 MHz,
VGS = 0 V
-
26
-
-
6
-
-
3.3
-
Test conditions
Min.
Typ.
Max.
VDD = 30 V, ID = 12 A,
RG = 4.7 Ω, VGS = 10 V (see
Figure 13: "Switching times
test circuit for resistive load"
and Figure 18: "Switching time
waveform")
-
10
-
-
19
-
-
56
-
-
7
-
VDD = 30 V, ID = 24 A,
VGS = 10 V (see Figure 14:
"Gate charge test circuit")
Unit
pF
nC
Table 6: Switching times
Symbol
td(on)
tr
td(off)
tf
4/15
Parameter
Turn-on delay time
Rise time
Turn-off delay time
Fall time
DocID028036 Rev 1
Unit
ns
STD30N6LF6AG
Electrical characteristics
Table 7: Source-drain diode
Symbol
ISD
Parameter
Test conditions
Min.
Typ.
Max.
Unit
Source-drain current
-
24
A
(1)
Source-drain current
(pulsed)
-
96
A
(2)
Forward on voltage
VGS = 0 V, ISD = 24 A
-
1.3
V
trr
Reverse recovery time
-
22.4
ns
Qrr
Reverse recovery charge
-
22.2
nC
IRRM
Reverse recovery current
ISD = 24 A, di/dt = 100 A/µs,
VDD = 48 V, TJ = 150 °C (see
Figure 15: "Test circuit for
inductive load switching and
diode recovery times")
-
2
A
ISDM
VSD
Notes:
(1)
(2)
Current is limited by package.
Pulse test: pulse duration = 300 µs, duty cycle 1.5%.
DocID028036 Rev 1
5/15
Electrical characteristics
2.1
6/15
STD30N6LF6AG
Electrical characteristics (curves)
Figure 2: Safe operating area
Figure 3: Thermal impedance
Figure 4: Output characteristics
Figure 5: Transfer characteristics
Figure 6: Gate charge vs gate-source voltage
Figure 7: Static drain-source on-resistance
DocID028036 Rev 1
STD30N6LF6AG
Electrical characteristics
Figure 8: Capacitance variations
Figure 9: Normalized gate threshold voltage
vs temperature
Figure 10: Normalized on-resistance vs
temperature
Figure 11: Normalized V(BR)DSS vs
temperature
Figure 12: Source-drain diode forward characteristics
DocID028036 Rev 1
7/15
Test circuits
3
STD30N6LF6AG
Test circuits
Figure 13: Switching times test circuit for resistive
load
Figure 14: Gate charge test circuit
Figure 15: Test circuit for inductive load switching
and diode recovery times
Figure 16: Unclamped inductive load test circuit
Figure 17: Unclamped inductive waveform
Figure 18: Switching time waveform
8/15
DocID028036 Rev 1
STD30N6LF6AG
4
Package information
Package information
In order to meet environmental requirements, ST offers these devices in different grades of
®
®
ECOPACK packages, depending on their level of environmental compliance. ECOPACK
specifications, grade definitions and product status are available at: www.st.com.
®
ECOPACK is an ST trademark.
4.1
DPAK (TO-252) type A package information
Figure 19: DPAK (TO-252) type A package outline
DocID028036 Rev 1
9/15
Package information
STD30N6LF6AG
Table 8: DPAK (TO-252) type A mechanical data
mm
Dim.
Min.
Max.
A
2.20
2.40
A1
0.90
1.10
A2
0.03
0.23
b
0.64
0.90
b4
5.20
5.40
c
0.45
0.60
c2
0.48
0.60
D
6.00
6.20
D1
4.95
E
6.40
E1
4.60
4.70
4.80
e
2.16
2.28
2.40
e1
4.40
4.60
H
9.35
10.10
L
1.00
1.50
(L1)
2.60
2.80
3.00
L2
0.65
0.80
0.95
L4
0.60
R
V2
10/15
Typ.
5.10
5.25
6.60
1.00
0.20
0°
DocID028036 Rev 1
8°
STD30N6LF6AG
Package information
Figure 20: DPAK (TO-252) recommended footprint (dimensions are in mm)
DocID028036 Rev 1
11/15
Package information
4.2
STD30N6LF6AG
DPAK (TO-252) packing information
Figure 21: DPAK (TO-252) tape outline
10 pitches cumulative
tolerance on tape +/- 0.2 mm
T
P0
Top cover
tape
P2
D
E
F
B1
K0
For machine ref. only
including draft and
radii concentric around B0
W
B0
A0
P1
D1
User direction of feed
R
Bending radius
User direction of feed
AM08852v1
12/15
DocID028036 Rev 1
STD30N6LF6AG
Package information
Figure 22: DPAK (TO-252) reel outline
T
40mm min.
access hole
at slot location
B
D
C
N
A
G measured
at hub
Tape slot
in core for
tape start
2.5mm min.width
Full radius
AM06038v1
Table 9: DPAK (TO-252) tape and reel mechanical data
Tape
Reel
mm
mm
Dim.
Dim.
Min.
Max.
A0
6.8
7
A
B0
10.4
10.6
B
1.5
12.1
C
12.8
B1
D
1.5
D1
1.5
E
1.65
F
1.6
Min.
Max.
330
13.2
D
20.2
G
16.4
1.85
N
50
7.4
7.6
T
K0
2.55
2.75
P0
3.9
4.1
Base qty.
2500
P1
7.9
8.1
Bulk qty.
2500
P2
1.9
2.1
R
40
T
0.25
0.35
W
15.7
16.3
DocID028036 Rev 1
18.4
22.4
13/15
Revision history
5
STD30N6LF6AG
Revision history
Table 10: Document revision history
14/15
Date
Revision
30-Jun-2015
1
DocID028036 Rev 1
Changes
First release.
STD30N6LF6AG
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and
improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST
products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order
acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the
design of Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2015 STMicroelectronics – All rights reserved
DocID028036 Rev 1
15/15
很抱歉,暂时无法提供与“STD30N6LF6AG”相匹配的价格&库存,您可以联系我们找货
免费人工找货