STD3NM60-1

N-CHANNEL 600V - 1.3Ω - 3A TO-220/DPAK/IPAK Zener-Protected MDmesh™Power MOSFET TYPE STP4NM60 STD3NM60 STD3NM60-1 s s s s STP4NM60 STD3NM60 - STD3NM60-1 VDSS 600 V 600 V 600 V RDS(on) < 1.5 Ω < 1.5 Ω < 1.5 Ω ID 4A 3A 3A Pw 69 W 42 W 42 W 2 1 3 s s TYPICAL RDS(on) = 1.3 Ω HIGH dv/dt AND AVALANCHE CAPABILITIES IMPROVED ESD CAPABILITY LOW INPUT CAPACITANCE AND GATE CHARGE LOW GATE INPUT RESISTANCE TIGHT PROCESS CONTROL AND HIGH MANUFACTORING YIELDS IPAK TO-220 3 1 DPAK DESCRIPTION The MDmesh™ is a new revolutionary MOSFET technology that associates the Multiple Drain process with the Company’s PowerMESH™ horizontal layout. The resulting product has an outstanding low on-resistance, impressively high dv/dt and excellent avalanche characteristics. The adoption of the Company’s proprietary strip technique yields overall dynamic performance that is significantly better than that of similar completition’s products. INTERNAL SCHEMATIC DIAGRAM APPLICATIONS The MDmesh™ family is very suitable for increase the power density of high voltage converters allowing system miniaturization and higher efficiencies. ORDERING INFORMATION SALES TYPE STP4NM60 STD3NM60T4 STD3NM60-1 MARKING P4NM60 D3NM60 D3NM60 PACKAGE TO-220 DPAK IPAK PACKAGING TUBE TAPE & REEL TUBE September 2002 1/12 STP4NM60 / STD3NM60 / STD3NM60-1 ABSOLUTE MAXIMUM RATINGS Symbol Parameter STP4NM60 Value STD3NM60 STD3NM60-1 Unit VDS VDGR VGS ID ID IDM (l) PTOT dv/dt (1) Tj Tstg Drain-source Voltage (VGS = 0) Drain-gate Voltage (RGS = 20 kΩ) Gate- source Voltage Drain Current (continuous) at TC = 25°C Drain Current (continuous) at TC = 100°C Drain Current (pulsed) Total Dissipation at TC = 25°C Derating Factor Peak Diode Recovery voltage slope Operating Junction Temperature Storage Temperature 4 2.52 16 69 0.55 600 600 ± 30 3 1.9 12 42 0.33 15 -65 to 150 -65 to 150 V V V A A A W W/°C V/ns °C °C (l) Pulse width limited by safe operating area (1) I SD ≤3A, di/dt ≤400 µ A, VDD ≤ V (BR)DSS, Tj ≤ T JMAX. THERMAL DATA TO-220 Rthj-case Rthj-amb Tl Thermal Resistance Junction-case Max Thermal Resistance Junction-ambient Max Maximum Lead Temperature For Soldering Purpose 1.82 62.5 300 DPAK IPAK 3 °C/W °C/W °C AVALANCHE CHARACTERISTICS Symbol IAR EAS Parameter Avalanche Current, Repetitive or Not-Repetitive (pulse width limited by Tj max) Single Pulse Avalanche Energy (starting Tj = 25 °C, ID = IAR, VDD = 50 V) Max Value 1.5 200 Unit A mJ GATE-SOURCE ZENER DIODE Symbol BVGSO Parameter Gate-Source Breakdown Voltage Test Conditions Igs=± 1mA (Open Drain) Min. 30 Typ. Max. Unit V PROTECTION FEATURES OF GATE-TO-SOURCE ZENER DIODES The built-in back-to-back Zener diodes have specifically been designed to enhance not only the device’s ESD capability, but also to make them safely absorb possible voltage transients that may occasionally be applied from gate to source. In this respect the Zener voltage is appropriate to achieve an efficient and cost-effective intervention to protect the device’s integrity. These integrated Zener diodes thus avoid the usage of external components. 2/12 STP4NM60 / STD3NM60 / STD3NM60-1 ELECTRICAL CHARACTERISTICS (TCASE =25°C UNLESS OTHERWISE SPECIFIED) ON/OFF Symbol V(BR)DSS IDSS IGSS VGS(th) RDS(on) Parameter Drain-source Breakdown Voltage Zero Gate Voltage Drain Current (VGS = 0) Gate-body Leakage Current (VDS = 0) Gate Threshold Voltage Static Drain-source On Resistance Test Conditions ID = 250 µA, VGS = 0 VDS = Max Rating VDS = Max Rating, TC = 125 °C VGS = ± 20V VDS = VGS, ID = 250µA VGS = 10V, ID = 1.5 A 3 4 1.3 Min. 600 1 10 ±5 5 1.5 Typ. Max. Unit V µA µA µA V Ω DYNAMIC Symbol gfs (1) Ciss Coss Crss Parameter Forward Transconductance Input Capacitance Output Capacitance Reverse Transfer Capacitance Parameter Turn-on Delay Time Rise Time Total Gate Charge Gate-Source Charge Gate-Drain Charge Test Conditions VDS = 15 V, ID = 1.5 A VDS = 25V, f = 1 MHz, VGS = 0 Min. Typ. 2.7 324 132 7.4 Max. Unit S pF pF pF SWITCHING ON Symbol td(on) tr Qg Qgs Qgd Test Conditions VDD = 300 V, ID = 1.5 A RG = 4.7Ω VGS = 10 V (Resistive Load see, Figure 3) VDD = 480V, ID = 3 A, VGS = 10V Min. Typ. 9 4 10 3 4.7 14 Max. Unit ns ns nC nC nC SWITCHING OFF Symbol tr(Voff) tf tc Parameter Off-voltage Rise Time Fall Time Cross-over Time Test Conditions VDD = 480 V, ID = 3 A, RG = 4.7Ω, VGS = 10V (Inductive Load see, Figure 5) Min. Typ. 16.5 10.5 15 Max. Unit ns ns ns SOURCE DRAIN DIODE Symbol ISD ISDM (2) VSD (1) trr Qrr IRRM trr Qrr IRRM Parameter Source-drain Current Source-drain Current (pulsed) Forward On Voltage Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current ISD = 3 A, VGS = 0 ISD = 3 A, di/dt = 100A/µs VDD = 100 V, Tj = 25°C (see test circuit, Figure 5) ISD = 3 A, di/dt = 100A/µs VDD = 100 V, Tj = 150°C (see test circuit, Figure 5) 224 1 9 296 1.4 9.3 Test Conditions Min. Typ. Max. 3 12 1.5 Unit A A V ns µC A ns µC A Note: 1. Pulsed: Pulse duration = 300 µs, duty cycle 1.5 %. 2. Pulse width limited by safe operating area. 3/12 STP4NM60 / STD3NM60 / STD3NM60-1 Safe Operating Area For TO-220 Thermal Impedance For TO-220 Safe Operating Area For DPAK / IPAK Thermal Impedance For DPAK / IPAK Output Characteristics Transfer Characteristics 4/12 STP4NM60 / STD3NM60 / STD3NM60-1 Transconductance Static Drain-source On Resistance Gate Charge vs Gate-source Voltage Capacitance Variations Normalized Gate Threshold Voltage vs Temp. Normalized On Resistance vs Temperature 5/12 STP4NM60 / STD3NM60 / STD3NM60-1 Source-drain Diode Forward Characteristics 6/12 STP4NM60 / STD3NM60 / STD3NM60-1 Fig. 1: Unclamped Inductive Load Test Circuit Fig. 2: Unclamped Inductive Waveform Fig. 3: Switching Times Test Circuit For Resistive Load Fig. 4: Gate Charge test Circuit Fig. 5: Test Circuit For Inductive Load Switching And Diode Recovery Times 7/12 STP4NM60 / STD3NM60 / STD3NM60-1 TO-220 MECHANICAL DATA DIM. MIN. A C D D1 E F F1 F2 G G1 H2 L2 L4 L5 L6 L7 L9 DIA. 13.0 2.65 15.25 6.2 3.5 3.75 0.49 0.61 1.14 1.14 4.95 2.4 10.0 16.4 14.0 2.95 15.75 6.6 3.93 3.85 0.511 0.104 0.600 0.244 0.137 0.147 4.40 1.23 2.40 1.27 0.70 0.88 1.70 1.70 5.15 2.7 10.40 0.019 0.024 0.044 0.044 0.194 0.094 0.393 0.645 0.551 0.116 0.620 0.260 0.154 0.151 mm TYP. MAX. 4.60 1.32 2.72 MIN. 0.173 0.048 0.094 0.050 0.027 0.034 0.067 0.067 0.203 0.106 0.409 inch TYP. MAX. 0.181 0.051 0.107 A C D1 L2 D F1 G1 E Dia. L5 L7 L6 L4 P011C L9 8/12 F2 F G H2 STP4NM60 / STD3NM60 / STD3NM60-1 TO-252 (DPAK) MECHANICAL DATA mm MIN. A A1 A2 B B2 C C2 D E G H L2 L4 V2 0.60 0o 2.20 0.90 0.03 0.64 5.20 0.45 0.48 6.00 6.40 4.40 9.35 0.8 1.00 8o 0.024 0o TYP. MAX. 2.40 1.10 0.23 0.90 5.40 0.60 0.60 6.20 6.60 4.60 10.10 MIN. 0.087 0.035 0.001 0.025 0.204 0.018 0.019 0.236 0.252 0.173 0.368 0.031 0.039 0o inch TYP. MAX. 0.094 0.043 0.009 0.035 0.213 0.024 0.024 0.244 0.260 0.181 0.398 DIM. P032P_B 9/12 STP4NM60 / STD3NM60 / STD3NM60-1 TO-251 (IPAK) MECHANICAL DATA DIM. MIN. A A1 A3 B B2 B3 B5 B6 C C2 D E G H L L1 L2 0.45 0.48 6 6.4 4.4 15.9 9 0.8 0.8 0.3 0.95 0.6 0.6 6.2 6.6 4.6 16.3 9.4 1.2 1 0.017 0.019 0.236 0.252 0.173 0.626 0.354 0.031 0.031 2.2 0.9 0.7 0.64 5.2 mm TYP. MAX. 2.4 1.1 1.3 0.9 5.4 0.85 0.012 0.037 0.023 0.023 0.244 0.260 0.181 0.641 0.370 0.047 0.039 MIN. 0.086 0.035 0.027 0.025 0.204 inch TYP. MAX. 0.094 0.043 0.051 0.031 0.212 0.033 H A C C2 L2 D B3 B6 A1 L = = 3 B5 B A3 = B2 = G = E L1 1 2 = 0068771-E 10/12 STP4NM60 / STD3NM60 / STD3NM60-1 DPAK FOOTPRINT TUBE SHIPMENT (no suffix)* All dimensions are in millimeters All dimensions are in millimeters TAPE AND REEL SHIPMENT (suffix ”T4”)* REEL MECHANICAL DATA DIM. A B C D G N T 1.5 12.8 20.2 16.4 50 22.4 18.4 13.2 mm MIN. MAX. 330 0.059 0.504 0.520 0.795 0.645 0.724 1.968 0.881 BULK QTY 2500 inch MIN. MAX. 12.992 TAPE MECHANICAL DATA DIM. A0 B0 B1 D D1 E F K0 P0 P1 P2 R W BASE QTY 2500 mm MIN. 6.8 10.4 1.5 1.5 1.65 7.4 2.55 3.9 7.9 1.9 40 15.7 16.3 inch MIN. MAX. 7 0.267 0.275 0.409 0.417 0.476 0.059 0.063 0.059 0.065 0.073 0.291 0.299 0.100 0.108 0.153 0.161 0.311 0.319 0.075 0.082 1.574 0.618 0.641 MAX. 10.6 12.1 1.6 1.85 7.6 2.75 4.1 8.1 2.1 * on sales type 11/12 STP4NM60 / STD3NM60 / STD3NM60-1 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. © The ST logo is a registered trademark of STMicroelectronics © 2002 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco Singapore - Spain - Sweden - Switzerland - United Kingdom - United States. © http://www.st.com 12/12