STD7NM60N, STF7NM60N, STU7NM60N
Datasheet
N-channel 600 V, 0.8 Ω typ., 5 A MDmesh™ II Power MOSFETs in
DPAK, TO-220FP and IPAK packages
Features
Order code
VDS
RDS(on) max.
ID
STD7NM60N
STF7NM60N
DPAK
600 V
STU7NM60N
D(2, TAB)
•
•
•
G(1)
Package
0.9 Ω
5A
TO-220FP
IPAK
100% avalanche tested
Low input capacitance and gate charge
Low gate input resistance
Applications
•
Switching applications
S(3)
AM01475v1_noZen
Description
These devices are N-channel Power MOSFETs developed using the second
generation of MDmesh™ technology. These revolutionary Power MOSFETs
associate a vertical structure to the company’s strip layout to yield one of the world’s
lowest on-resistance and gate charge. They are therefore suitable for the most
demanding high-efficiency converters.
Product status link
STD7NM60N
STF7NM60N
STU7NM60N
DS6523 - Rev 5 - September 2018
For further information contact your local STMicroelectronics sales office.
www.st.com
STD7NM60N, STF7NM60N, STU7NM60N
Electrical ratings
1
Electrical ratings
Table 1. Absolute maximum ratings
Symbol
Value
Parameter
DPAK, IPAK
TO-220FP
Unit
VDS
Drain-source voltage
600
V
VGS
Gate-source voltage
±25
V
ID
Drain current (continuous) at TC = 25 °C
ID
Drain current (continuous) at TC = 100 °C
IDM
(2)
5
5 (1)
A
3
(1)
A
Drain current (pulsed)
20
PTOT
Total dissipation at TC = 25 °C
45
VISO
Insulation withstand voltage (RMS) from all three
leads to external heat-sink (t = 1 s, TC = 25 °C)
dv/dt (3)
Tj
Peak diode recovery voltage slope
Operating junction temperature range
Tstg
Storage temperature range
3
20
(1)
A
20
W
2.5
kV
15
V/ns
-55 to 150
°C
1. Limited by maximum junction temperature.
2. Pulse width limited by safe operating area.
3. ISD ≤ 5 A, di/dt ≤ 100 A/μs, VDSpeak ≤ V(BR)DSS, VDD = 80% V(BR)DSS.
Table 2. Thermal data
Symbol
Parameter
Rthj-case
Thermal resistance junction-case
Rthj-amb
Thermal resistance junction-ambient
Rthj-pcb
(1)
Thermal resistance junction-pcb
Value
Unit
DPAK
TO-220FP
IPAK
2.78
6.25
2.78
°C/W
62.5
100
°C/W
50
°C/W
1. When mounted on 1inch² FR-4 board, 2 oz Cu.
Table 3. Avalanche characteristics
Symbol
Parameter
IAS(1)
Avalanche current, repetitive or not-repetitive
EAS(2)
Single pulse avalanche energy
Value
Unit
2
A
119
mJ
1. Pulse width limited by Tj max.
2. Starting Tj = 25 °C, ID = IAS, VDD = 50 V.
DS6523 - Rev 5
page 2/26
STD7NM60N, STF7NM60N, STU7NM60N
Electrical characteristics
2
Electrical characteristics
(TCASE = 25 °C unless otherwise specified)
Table 4. On/off states
Symbol
Parameter
V(BR)DSS
Drain-source
breakdown voltage
Test conditions
Min.
ID = 1 mA, VGS = 0 V
Typ.
600
Zero gate voltage drain
current
IGSS
Gate body leakage
current
VDS = 0 V, VGS = ±20 V
VGS(th)
Gate threshold voltage
VDS = VGS, ID = 250 µA
RDS(on)
Static drain-source on
resistance
VGS = 10 V, ID = 2.5 A
VGS = 0 V, VDS = 600 V, TC = 125 °C
1
µA
100
µA
100
nA
3
4
V
0.8
0.9
Ω
Typ.
Max.
Unit
-
pF
(1)
2
Unit
V
VGS = 0 V, VDS = 600 V
IDSS
Max.
1. Defined by design, not subject to production test.
Table 5. Dynamic
Symbol
Parameter
Ciss
Input capacitance
Coss
Output capacitance
Crss
Reverse transfer
capacitance
Test conditions
Min.
363
VDS = 50 V, f = 1 MHz, VGS = 0 V
-
24.6
1.1
Coss eq. (1)
Equivalent capacitance
time related
VDS = 0 to 480 V, VGS = 0 V
-
130
-
pF
RG
Intrinsic gate resistance
f = 1 MHz open drain
-
5.4
-
Ω
Qg
Total gate charge
Qgs
Gate-source charge
-
nC
Qgd
Gate-drain charge
VDD = 480 V, ID = 5 A, VGS = 0 to 10 V
(see Figure 14. Test circuit for gate charge
behavior)
14
-
2.7
7.7
1. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0
to 80% VDSS.
Table 6. Switching times
Symbol
td(on)
tr
td(off)
tf
DS6523 - Rev 5
Parameter
Test conditions
Turn-on delay time
VDD = 300 V, ID = 2.5 A,
Rise time
RG = 4.7 Ω, VGS = 10 V
Turn-off delay time
(see Figure 13. Test circuit for resistive load
switching times and Figure 18. Switching
time waveform)
Fall time
Min.
Typ.
Max.
Unit
-
ns
7
-
10
26
12
page 3/26
STD7NM60N, STF7NM60N, STU7NM60N
Electrical characteristics
Table 7. Source drain diode
Symbol
Parameter
Test conditions
ISD
Source-drain current
ISDM (1)
Source-drain current
(pulsed)
VSD (2)
Forward on voltage
ISD = 5 A, VGS = 0 V
trr
Reverse recovery time
ISD = 5 A, di/dt = 100 A/µs
Qrr
Reverse recovery charge
IRRM
Reverse recovery current
VDD = 60 V (see Figure 15. Test circuit for
inductive load switching and diode recovery
times)
trr
Reverse recovery time
ISD = 5 A, di/dt = 100 A/µs
Qrr
Reverse recovery charge
IRRM
Reverse recovery current
VDD = 60 V, Tj = 150 °C(see Figure 15. Test
circuit for inductive load switching and
diode recovery times)
Min.
Typ.
Max.
Unit
5
-
20
-
-
-
1.3
A
V
213
ns
1.5
μC
14
A
265
ns
1.8
μC
14
A
1. Pulse width limited by safe operating area.
2. Pulsed: pulse duration = 300 μs, duty cycle 1.5%.
DS6523 - Rev 5
page 4/26
STD7NM60N, STF7NM60N, STU7NM60N
Electrical characteristics curves
2.1
Electrical characteristics curves
Figure 1. Safe operating area for DPAK and IPAK
ID
Figure 2. Thermal impedance for DPAK and IPAK
)
10µs
D
S(
on
O
Li p e r
m at
ite io
d ni
by n
m th is
ax a
R re a
is
AM06474v1
0
100µs
1ms
Tj=150°C
Tc=25°C
-1
10ms
S ingle
puls
-2
-1
0
2
DS
Figure 3. Safe operating area for TO-220FP
Figure 4. Thermal impedance for TO-220FP
AM06475v1
ID
K
GC20940
on
)
10µs
D
S(
O
Li p e r
m at
ite io
d ni
by n
m th is
ax a
R re a
is
101
100
10 -1
100µs
1ms
10ms
10 -2
Tj=150°C
Tc=25°C
10-1
S ingle
puls e
10-2
10-1
100
101
102
10 -3
10 -4
DS
Figure 5. Output characterisics
AM06477v1
ID (A)
9
VGS =10V
10 -2
10 -1
10 0
t p (s)
Figure 6. Transfer characteristics
AM06478v1
ID
9
6V
8
10 -3
VDS =20V
8
7
7
6
6
5
5
4
4
5V
3
3
2
2
1
1
0
0
0
DS6523 - Rev 5
10
20
40
VDS (V)
0
4
8
VGS (V)
page 5/26
STD7NM60N, STF7NM60N, STU7NM60N
Electrical characteristics curves
Figure 7. Gate charge vs gate-source voltage
AM06479v1
VGS
(V)
VDD=480V
ID=5A
12
VDS
(V)
500
VDS
10
AM06480v1
R DS (on)
(Ohm )
VGS =10V
0.88
0.86
400
8
300
6
200
4
0.84
0.82
0.80
0.78
100
2
0
Figure 8. Static drain-source on-resistance
0
2
6
4
8
10 12
0
14 16 Q g (nC)
Figure 9. Capacitance variations
0.76
0.74
2
1
0
3
4
5
ID(A)
Figure 10. Normalized gate threshold voltage vs
temperature
AM06483v1
VGS (th)
(norm)
1.10
ID=250µA
103
1.00
102
0.90
101
100
10-1
0.80
101
100
0.70
-50
102
Figure 11. Normalized on-resistance vs temperature
AM06484v1
R DS (on)
(norm)
50
75
100
TJ (°C)
AM06485v1
V(BR)DSS
ID=1mA
1.05
1.7
1.03
1.5
1.01
1.3
0.99
1.1
0.9
0.97
0.7
0.95
DS6523 - Rev 5
25
Figure 12. Normalized V(BR)DSS vs temperature
1.07
1.9
0.5
-50 -25
0
(norm)
ID=2.5A
2.1
-25
0
25
50
75 100
TJ (°C)
0.93
-50 -25
0
25
50
75 100
TJ (°C)
page 6/26
STD7NM60N, STF7NM60N, STU7NM60N
Test circuits
3
Test circuits
Figure 13. Test circuit for resistive load switching times
Figure 14. Test circuit for gate charge behavior
VDD
12 V
2200
+ μF
3.3
μF
VDD
VD
VGS
1 kΩ
100 nF
RL
IG= CONST
VGS
RG
47 kΩ
+
pulse width
D.U.T.
2.7 kΩ
2200
μF
pulse width
D.U.T.
100 Ω
VG
47 kΩ
1 kΩ
AM01469v1
AM01468v1
Figure 15. Test circuit for inductive load switching and
diode recovery times
D
G
A
D.U.T.
S
25 Ω
A
L
A
B
B
3.3
µF
D
G
+
VD
100 µH
fast
diode
B
Figure 16. Unclamped inductive load test circuit
RG
1000
+ µF
2200
+ µF
VDD
3.3
µF
VDD
ID
D.U.T.
S
D.U.T.
Vi
_
pulse width
AM01471v1
AM01470v1
Figure 18. Switching time waveform
Figure 17. Unclamped inductive waveform
ton
V(BR)DSS
td(on)
VD
toff
td(off)
tr
tf
90%
90%
IDM
VDD
10%
0
ID
VDD
AM01472v1
VGS
0
VDS
10%
90%
10%
AM01473v1
DS6523 - Rev 5
page 7/26
STD7NM60N, STF7NM60N, STU7NM60N
Package information
4
Package information
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK®
packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions
and product status are available at: www.st.com. ECOPACK® is an ST trademark.
DS6523 - Rev 5
page 8/26
STD7NM60N, STF7NM60N, STU7NM60N
DPAK (TO-252) type A package information
4.1
DPAK (TO-252) type A package information
Figure 19. DPAK (TO-252) type A package outline
0068772_A_25
DS6523 - Rev 5
page 9/26
STD7NM60N, STF7NM60N, STU7NM60N
DPAK (TO-252) type A package information
Table 8. DPAK (TO-252) type A mechanical data
Dim.
mm
Min.
Max.
A
2.20
2.40
A1
0.90
1.10
A2
0.03
0.23
b
0.64
0.90
b4
5.20
5.40
c
0.45
0.60
c2
0.48
0.60
D
6.00
6.20
D1
4.95
E
6.40
E1
4.60
4.70
4.80
e
2.159
2.286
2.413
e1
4.445
4.572
4.699
H
9.35
10.10
L
1.00
1.50
(L1)
2.60
2.80
3.00
L2
0.65
0.80
0.95
L4
0.60
R
V2
DS6523 - Rev 5
Typ.
5.10
5.25
6.60
1.00
0.20
0°
8°
page 10/26
STD7NM60N, STF7NM60N, STU7NM60N
DPAK (TO-252) type C package information
4.2
DPAK (TO-252) type C package information
Figure 20. DPAK (TO-252) type C package outline
0068772_C_25
DS6523 - Rev 5
page 11/26
STD7NM60N, STF7NM60N, STU7NM60N
DPAK (TO-252) type C package information
Table 9. DPAK (TO-252) type C mechanical data
Dim.
mm
Min.
Typ.
Max.
A
2.20
2.30
2.38
A1
0.90
1.01
1.10
A2
0.00
0.10
b
0.72
0.85
b4
5.13
c
0.47
0.60
c2
0.47
0.60
D
6.00
D1
5.25
E
6.50
E1
4.70
e
5.46
6.10
6.20
6.60
6.70
2.186
2.286
2.386
H
9.80
10.10
10.40
L
1.40
1.50
1.70
L1
L2
2.90 REF
0.90
L3
L4
1.25
0.51 BSC
0.60
L6
DS6523 - Rev 5
5.33
0.80
1.00
1.80 BSC
θ1
5°
7°
9°
θ2
5°
7°
9°
V2
0°
8°
page 12/26
STD7NM60N, STF7NM60N, STU7NM60N
DPAK (TO-252) type E package information
4.3
DPAK (TO-252) type E package information
Figure 21. DPAK (TO-252) type E package outline
0068772_type-E_rev.25
DS6523 - Rev 5
page 13/26
STD7NM60N, STF7NM60N, STU7NM60N
DPAK (TO-252) type E package information
Table 10. DPAK (TO-252) type E mechanical data
Dim.
A
mm
Min.
Typ.
Max.
2.18
2.39
A2
0.13
b
0.65
0.884
b4
4.95
5.46
c
0.46
0.61
c2
0.46
0.60
D
5.97
6.22
D1
5.21
E
6.35
E1
4.32
6.73
e
2.286
e1
4.572
H
9.94
10.34
L
1.50
1.78
L1
L2
2.74
0.89
L4
1.27
1.02
Figure 22. DPAK (TO-252) recommended footprint (dimensions are in mm)
FP_0068772_25
DS6523 - Rev 5
page 14/26
STD7NM60N, STF7NM60N, STU7NM60N
DPAK (TO-252) packing information
4.4
DPAK (TO-252) packing information
Figure 23. DPAK (TO-252) tape outline
10 pitches cumulative
tolerance on tape +/- 0.2 mm
T
P0
Top cover
tape
P2
D
E
F
B1
K0
For machine ref. only
including draft and
radii concentric around B0
W
B0
A0
P1
D1
User direction of feed
R
Bending radius
User direction of feed
AM08852v1
DS6523 - Rev 5
page 15/26
STD7NM60N, STF7NM60N, STU7NM60N
DPAK (TO-252) packing information
Figure 24. DPAK (TO-252) reel outline
T
40mm min.
access hole
at slot location
B
D
C
N
A
G measured
at hub
Tape slot
in core for
tape start
2.5mm min.width
Full radius
AM06038v1
Table 11. DPAK (TO-252) tape and reel mechanical data
Tape
Dim.
mm
mm
Dim.
Min.
Max.
A0
6.8
7
A
B0
10.4
10.6
B
1.5
12.1
C
12.8
1.6
D
20.2
G
16.4
50
B1
DS6523 - Rev 5
Reel
Min.
Max.
330
13.2
D
1.5
D1
1.5
E
1.65
1.85
N
F
7.4
7.6
T
K0
2.55
2.75
P0
3.9
4.1
Base qty.
2500
P1
7.9
8.1
Bulk qty.
2500
P2
1.9
2.1
R
40
T
0.25
0.35
W
15.7
16.3
18.4
22.4
page 16/26
STD7NM60N, STF7NM60N, STU7NM60N
TO-220FP package information
4.5
TO-220FP package information
Figure 25. TO-220FP package outline
7012510_Rev_12_B
DS6523 - Rev 5
page 17/26
STD7NM60N, STF7NM60N, STU7NM60N
TO-220FP package information
Table 12. TO-220FP package mechanical data
Dim.
mm
Min.
Max.
A
4.4
4.6
B
2.5
2.7
D
2.5
2.75
E
0.45
0.7
F
0.75
1
F1
1.15
1.70
F2
1.15
1.70
G
4.95
5.2
G1
2.4
2.7
H
10
10.4
L2
DS6523 - Rev 5
Typ.
16
L3
28.6
30.6
L4
9.8
10.6
L5
2.9
3.6
L6
15.9
16.4
L7
9
9.3
Dia
3
3.2
page 18/26
STD7NM60N, STF7NM60N, STU7NM60N
IPAK (TO-251) type A package information
4.6
IPAK (TO-251) type A package information
Figure 26. IPAK (TO-251) type A package outline
0068771_IK_typeA_rev14
DS6523 - Rev 5
page 19/26
STD7NM60N, STF7NM60N, STU7NM60N
IPAK (TO-251) type A package information
Table 13. IPAK (TO-251) type A package mechanical data
Dim.
mm
Min.
Typ.
A
2.20
2.40
A1
0.90
1.10
b
0.64
0.90
b2
b4
0.95
5.20
B5
5.40
0.30
c
0.45
0.60
c2
0.48
0.60
D
6.00
6.20
E
6.40
6.60
e
e1
2.28
4.40
H
DS6523 - Rev 5
Max.
4.60
16.10
L
9.00
9.40
L1
0.80
1.20
L2
0.80
V1
10°
1.00
page 20/26
STD7NM60N, STF7NM60N, STU7NM60N
IPAK (TO-251) type C package information
4.7
IPAK (TO-251) type C package information
Figure 27. IPAK (TO-251) type C package outline
0068771_IK_typeC_rev14
DS6523 - Rev 5
page 21/26
STD7NM60N, STF7NM60N, STU7NM60N
IPAK (TO-251) type C package information
Table 14. IPAK (TO-251) type C package mechanical data
Dim.
mm
Min.
Typ.
Max.
A
2.20
2.30
2.35
A1
0.90
1.00
1.10
b
0.66
0.79
b2
DS6523 - Rev 5
0.90
b4
5.23
5.33
5.43
c
0.46
0.59
c2
0.46
0.59
D
6.00
6.10
6.20
D1
5.20
5.37
5.55
E
6.50
6.60
6.70
E1
4.60
4.78
4.95
e
2.20
2.25
2.30
e1
4.40
4.50
4.60
H
16.18
16.48
16.78
L
9.00
9.30
9.60
L1
0.80
1.00
1.20
L2
0.90
1.08
1.25
θ1
3°
5°
7°
θ2
1°
3°
5°
page 22/26
STD7NM60N, STF7NM60N, STU7NM60N
Ordering information
5
Ordering information
Table 15. Order codes
Order code
Marking
STD7NM60N
STF7NM60N
STU7NM60N
DS6523 - Rev 5
7NM60N
Package
Packing
DPAK
Tape and reel
TO-220FP
IPAK
Tube
page 23/26
STD7NM60N, STF7NM60N, STU7NM60N
Revision history
Table 16. Document revision history
Date
Version
29-Oct-2009
1
First release.
19-Jul-2010
2
Corrected values in Table 3: Thermal data.
11-Oct-2010
3
Inserted new value in Table 6: Dynamic
04-Nov-2010
Changes
Changed RDS(on) typical value.
The part number STP7NM60N has been moved to a separate datasheet.
Removed maturity status indication from cover page. The document status is
production data.
05-Sep-2018
Updated title and features in cover page.
Updated Section 1 Electrical ratings, Section 2 Electrical characteristics and
Section 4 Package information.
Minor text changes.
DS6523 - Rev 5
page 24/26
STD7NM60N, STF7NM60N, STU7NM60N
Contents
Contents
1
Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
2
Electrical characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.1
Electrical characteristics curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3
Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
4
Package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
5
4.1
DPAK (TO-252) type A package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
4.2
DPAK (TO-252) type C package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4.3
DPAK (TO-252) type E package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4.4
DPAK (TO-252) packing information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4.5
TO-220FP package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
4.6
IPAK (TO-251) type A package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
4.7
IPAK (TO-251) type C package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
DS6523 - Rev 5
page 25/26
STD7NM60N, STF7NM60N, STU7NM60N
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST
products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST
products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of
Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2018 STMicroelectronics – All rights reserved
DS6523 - Rev 5
page 26/26