STEVAL-IDI002V2

STEVAL-IDI002V2 Multi-sensor RF platform 6LoWPAN & NFC interface board Data brief Description The STEVAL-IDI002V2 is an evaluation platform for a 6LoWPAN multi-sensor RF network based on the SPIRIT1 Sub-GHz RF transceiver and the STM32L152RBT6 low power Cortex M3 microcontroller. The STM32L152RBT6 runs the open source 6LoWPAN Contiki stack. In addition to the 6LoWPAN stack, an application is provided which communicates with the various sensors on the STEVAL-IDI003V2 daughterboard through a 10-pin connector. Alternatively, this connector can be used to control/interface with any sensor or actuator. This 6LoWPAN multi-sensor RF board communicates with the STEVAL-IDI004V2 IoT wireless bridge evaluation board. Features           SPIRIT1-based 868 MHz RF platform Low power STM32L series microcontroller Contains the M24LR64E dual EEPROM Can be powered by USB or Li-Ion battery Runs the 6LoWPAN Contiki stack SPIRIT1:  Supports from 150 MHz to 956 MHz  9 mA receiving & 21 mA transmitting at +11 dbm  Built-in AES 128-bit encryption  sensitivity up to -118 dbm To be used with multi-sensor board STEVAL-IDI003V2 Can be used to evaluate/develop applications for IoT Android App available to connect to STEVAL-IDI004V2 RoHS compliant October 2015 DocID028223 Rev 1 For further information contact your local STMicroelectronics sales office 1/6 www.st.com Schematic diagrams 1 STEVAL-IDI002V2 Schematic diagrams Figure 1: STEVAL-IDI002V2 circuit schematic (1 of 7) GSPG10082015DI1540 Figure 2: STEVAL-IDI002V2 circuit schematic (2 of 7) GSPG10082015DI1545 2/6 DocID028223 Rev 1 STEVAL-IDI002V2 Schematic diagrams Figure 3: STEVAL-IDI002V2 circuit schematic (3 of 7) GSPG10082015DI1550 Figure 4: STEVAL-IDI002V2 circuit schematic (4 of 7) GSPG10082015DI1555 Figure 5: STEVAL-IDI002V2 circuit schematic (5 of 7) GSPG10082015DI1600 DocID028223 Rev 1 3/6 Schematic diagrams STEVAL-IDI002V2 Figure 6: STEVAL-IDI002V2 circuit schematic (6 of 7) GSPG10082015DI1605 Figure 7: STEVAL-IDI002V2 circuit schematic (7 of 7) GSPG10082015DI1610 4/6 DocID028223 Rev 1 STEVAL-IDI002V2 2 Revision history Revision history Table 1: Document revision history Date Version 06-Oct-2015 1 DocID028223 Rev 1 Changes Initial release. 5/6 STEVAL-IDI002V2 IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2015 STMicroelectronics – All rights reserved 6/6 DocID028223 Rev 1