STEVAL-IFP017V3

STEVAL-IFP017V3 Evaluation board for IO-Link transceiver device L6362A Data brief  RoHS compliant Description The STEVAL-IFP017V3 is an evaluation board designed to analyze the features of L6362A, including fast demagnetization, reverse polarity, overload, overtemperature, ground and supply open wire protections. The highly robust design of the L6362A allows the STEVAL-IFP017V3 to meet IEC 61000-4-4 (burst), IEC 61000-4-2 (ESD) and EN60947-52/IEC 61000-4-5 (surge) without additional external components. Features              Operating voltage from 7 to 36 V Operating current up to 300 mA Configurable in push-pull, high-side or lowside Overcurrent protection with cutoff function Overtemperature protection Suitable to drive R, L and C loads Delayed cutoff for quick charging of capacitive loads Able to handle up to 500 mJ inductive loads Full reverse polarity protection on VCC, GND, OUTH, OUTL and I/Q pins Green device status LED (ON or OFF) Red diagnostic LEDs for:  cutoff and overtemperature events  overload Supports COM1, COM2 and COM3 Meets IEC 61000-4-4 (burst), IEC 61000-4-2 (ESD) and EN60947-5-2/IEC 61000-4-5 (surge) requirements May 2016 The STEVAL-IFP017V3 offers dedicated input and output screw connectors to facilitate easy and flexible connections for user requirements. The on-board red and green LEDs signal the IC status. On the STEVAL-IFP017V3, the exposed pad of the L6362A is connected to an electrically floating copper area which acts as a heatsink. DocID029010 Rev 3 For further information contact your local STMicroelectronics sales office 1/4 www.st.com Schematic diagram 1 STEVAL-IFP017V3 Schematic diagram Figure 1: STEVAL-IFP017V3 circuit schematic 2/4 DocID029010 Rev 3 STEVAL-IFP017V3 2 Revision history Revision history Table 1: Document revision history Date Version Changes 16-Feb-2016 1 Initial release. 18-Feb-2016 2 - Updated document title and features. - Minor text corrections. 06-May-2016 3 - Updated board photo on the cover page. DocID029010 Rev 3 3/4 STEVAL-IFP017V3 IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2016 STMicroelectronics – All rights reserved 4/4 DocID029010 Rev 3