STEVAL-IFS017V8

STEVAL-IFS017V8 STTS2004 temperature sensor daughter card for connection to the STEVAL-IFS017V1 system evaluation board Data brief Features • • • Multiple device temperature sensor USB powered RoHS compliant Description The STEVAL-IFS017V8 is a temperature sensor daughter card based on the STTS2004. The STEVAL-IFS017V7 daughter card can be mounted into STEVAL-IFS017V1 motherboard platform in order to test multiple temperature sensor and real-time clock (RTC). November 2013 DocID025537 Rev 1 For further information contact your local STMicroelectronics sales office 1/4 www.st.com 2/4 DocID025537 Rev 1 SOCKET J6 1 2 3 4 5 6 7 8 9 SOCKET A0 A1 A2 U3 1 2 3 4 STTS200 4 A0 VDD A1 EVE NT SCL A2 GND SDA 8 7 6 5 STTS2004 2 4 6 8 10 12 14 16 18 20 1 2 C7 22pF C6 0.1uF CON20A P VDD #ALE RT _D SCL_D SDA_D 1 3 5 7 9 11 13 15 17 19 J2 1 2 C8 22pF R6 10k VDD SDA_D SCL_D #ALE RT _D VDD VDD 330E R12 D6 POWER_LED R4 10K VCC VCC 1 2 3 0E VCC R5 74V1G14S TR 5 4 U1 R1 C5 R10 9.1K R8 6.8K 10nF VCC 1uF 220E C1 In J5: Short PIN1 and PIN2 for 2.2V Short PIN3 and PIN4 for 2.5 V In SW1: If switch not pressed then normal supply to A0 pi n If switch pressed then 7-10V supply to A0 pi n 1K VCC VCC VCC VCC VDD _D A0 A1 A2 CONNECTORS 7V - 10V 2 4 6 8 10 12 14 16 18 20 CON20A P A1 A2 R7 SW 1 SW ITCH VCC 1 3 5 7 9 11 13 15 17 19 SDA_D SCL_D #ALE RT _D J1 Daughter Card ID : 0x0F 1uF U2 R11 6.8K 1uF TS343 1 D4 BAT54 D1 7V - 10V C9 1uF VCC VDD VDD _D R13 22K 10V ZEN/SOT-23 D5 150E CONN ECT OR J3 C3 1uF R2 In J3: Short PIN1 and PIN2 for 2.2V 2.5 V Short PIN2 and PIN3 for 2.3V 2.7 V 3.0V 3.3V 3.6 V 3 1 2 Anod e 1 BAT54 CONN ECT OR J5 4 2 R9 6.8K C2 D3 Reference Cathod e 3 C4 D2 BAT54 10V 3 2 1 1 2 3 R3 10K 1 VCC STTS2004 Schematic diagram STEVAL-IFS017V8 Schematic diagram Figure 1: STEVAL-IFS017V8 circuit schematic GSPG15112013SG1400 STEVAL-IFS017V8 2 Revision history Revision history Table 1: Document revision history Data Revision 21-Nov-2013 1 DocID025537 Rev 1 Changes Initial release 3/4 STEVAL-IFS017V8 Please Read Carefully Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. ST PRODUCTS ARE NOT DESIGNED OR AUTHORIZED FOR USE IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFE SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B) AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR ENVIRONMENTS, AND/OR (D) AEROSPACE APPLICATIONS OR ENVIRONMENTS. WHERE ST PRODUCTS ARE NOT DESIGNED FOR SUCH USE, THE PURCHASER SHALL USE PRODUCTS AT PURCHASER’S SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN WRITING OF SUCH USAGE, UNLESS A PRODUCT IS EXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR "AUTOMOTIVE, AUTOMOTIVE SAFETY OR MEDICAL" INDUSTRY DOMAINS ACCORDING TO ST PRODUCT DESIGN SPECIFICATIONS. PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED ARE DEEMED SUITABLE FOR USE IN AEROSPACE BY THE CORRESPONDING GOVERNMENTAL AGENCY. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2013 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 4/4 DocID025537 Rev 1