STEVAL-IHM037V1

STEVAL-IHM037V1 Ceiling fan remote control unit based on the STM8 microcontroller Data brief Features • Operating voltage: 180-250 VAC • Low-cost capacitive power supply for the STM8S003F3 (receiver), and CR2032 coin cell battery for the STM8L101F2 (IR remote) • Triac-based speed control with firing angle • IR receiver for speed control through RC5 remote • Two pushbuttons for speed change • RoHS compliant Description The STEVAL-IHM037V1 demonstration board implements speed control for an induction motorbased ceiling fan using a remote control. Traditionally, fan speed is controlled using a Triacbased regulator, which must be operated manually. The STEVAL-IHM037V1 replaces the manual regulator with a remote control-based solution. Two pushbuttons are also provided to increase or decrease fan speed. Speed is regulated by controlling the firing angle of a Triac (T435x) with the STM8S003x microcontroller. February 2013 DocID023317 Rev 2 1/5 www.st.com 5 Schematic diagram 1 STEVAL-IHM037V1 Schematic diagram Figure 1. STEVAL-IHM037V1 circuit schematic (1 of 2) 9 - + GDWD +       &211 75%/. /,9( ' 9 - 7623  Q)   & X)9  & 3 & ' 175// - 5 5 9 :   Q)9 9   2$2 ' // 3 5 , .: NH\ &   S) UHVHW - 55 53*"$ 6:  .H\ 5 8      O' 3& 3& 3& 3% 3%      9 45.4'1 3' 3' 3' 1567 26&,1 RVFRXW 966 9&$3 9'' 3$ & GDWD   Q) & 2/5 5 5 5      NH\ . 3' 3' 3' 3& 3& UHVHW 5 .      9 NH\ 9 VZLP NH\ TXJN
DPOOFDUPS 48 48
5"$54145  RKP VZLP 9     Q) & DocID023317 Rev 2 4 %&& . & Q) STEVAL-IHM037V1 Schematic diagram Figure 2. STEVAL-IHM037V1 circuit schematic (2 of 2)     - &21 9 *1' 9  8 4 4   675 &5 5 Q) %7  &                     6:  6: 3 3$'6 6:  6: 3 3$'6 61 %08/ 6:  6:3$'6 ( 670/)3 3 9 ' ,5/(' DocID023317 Rev 2 3/5 Revision history 2 STEVAL-IHM037V1 Revision history Table 1. Document revision history 4/5 Date Revision Changes 15-Jun-2012 1 Initial release. 11-Feb-2013 2 – Minor text edits throughout document. – Replaced Figure 1 and Figure 2 with more detailed schematic diagrams. DocID023317 Rev 2 STEVAL-IHM037V1 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. ST PRODUCTS ARE NOT AUTHORIZED FOR USE IN WEAPONS. NOR ARE ST PRODUCTS DESIGNED OR AUTHORIZED FOR USE IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFE SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B) AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR ENVIRONMENTS, AND/OR (D) AEROSPACE APPLICATIONS OR ENVIRONMENTS. WHERE ST PRODUCTS ARE NOT DESIGNED FOR SUCH USE, THE PURCHASER SHALL USE PRODUCTS AT PURCHASER’S SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN WRITING OF SUCH USAGE, UNLESS A PRODUCT IS EXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR “AUTOMOTIVE, AUTOMOTIVE SAFETY OR MEDICAL” INDUSTRY DOMAINS ACCORDING TO ST PRODUCT DESIGN SPECIFICATIONS. PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED ARE DEEMED SUITABLE FOR USE IN AEROSPACE BY THE CORRESPONDING GOVERNMENTAL AGENCY. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2013 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com DocID023317 Rev 2 5/5