STEVAL-ILB009V1
2 x 28 W electronic ballast with active PFC based on the
STD3N62K3 and STD845DN40 BJT devices
Data brief − production data
Features
■
Input voltage range: 180 Vac to 264 Vac
■
Nominal output voltage: 400 V
■
Nominal output power: 60 W
■
Target efficiency: ~ 90 %
■
Minimum switching frequency: 35 kHz
■
Expected power factor (PF): 0.99
■
RoHS compliant
Description
The STEVAL-ILB009V1 demonstration board is
able to drive a 2 x 28 W electronic lamp ballast
with active PFC. The ballast is formed by a PFC
section and a self-oscillating half bridge converter.
The circuit has been designed for a nominal input
voltage of 230 Vrms ± 15% and 50-60 Hz.
The key components are the power bipolar
transistor (STD845DN40), MOSFET device
(STD3N62K3) and ST power switching driver for
the PFC section.
The purpose of the STEVAL-ILB009V1 is to show
a simple and cheap lighting application optimized
in terms of power factor (PFC), THD harmonic
distortion, and electrical efficiency.
March 2012
Doc ID 022895 Rev 1
This is information on a product in full production. For further information contact your local STMicroelectronics sales
office.
1/4
www.st.com
4
2/4
,QSXW
&
Q)
7
)LOWHU&DSDFLWDQFH
'
'
'
'
0HQR
Q)
Doc ID 022895 Rev 1
5:
.
&
5
0:
Q)
&
&
0HQR
=&'
&6
*1'
08/7
*'
9&&
&203
,19
Q)
&
X)
5:
N
5:
5:
N
/$
'
Q
&
'
',2'(
5:
0HQR
7
N
5:
5
67'1.
&
',2'(
'
N
5:
N
5
0:
5:
5:
5:
4
5:
17&
&
5
677+/$
'
N
U
5:
N
&
5:
0
5:
0
X)
9EXV
Q
5
.
9EXV
&
'
5
.
/
5
.
/
5:
',$&
5:
'
'%
S)
4
,QGXFWRU
/
,QGXFWRU
&
/
5:
4
&
Q
4
&
Q
5:
5:
5:
,QGXFWRU
'
4
Q)
&
,QGXFWRU
/
Q)
&
QHRQ
QHRQ
8
57
U
U
8
Q)
& Q)
57
&
&
Q)
&
Q)
Figure 1.
1
Circuit schematic
STEVAL-ILB009V1
Circuit schematic
STEVAL-ILB009V1 circuit schematic
$0Y
STEVAL-ILB009V1
2
Revision history
Revision history
Table 1.
Document revision history
Date
Revision
08-Mar-2012
1
Changes
Initial release.
Doc ID 022895 Rev 1
3/4
STEVAL-ILB009V1
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2012 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
4/4
Doc ID 022895 Rev 1
很抱歉,暂时无法提供与“STEVAL-ILB009V1”相匹配的价格&库存,您可以联系我们找货
免费人工找货