0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
STEVAL-IPE005V1

STEVAL-IPE005V1

  • 厂商:

    STMICROELECTRONICS(意法半导体)

  • 封装:

    -

  • 描述:

    STPM01, STR710FZ2T6 - Power Management, Energy/Power Meter Evaluation Board

  • 数据手册
  • 价格&库存
STEVAL-IPE005V1 数据手册
STEVAL-IPE005V1 Demonstration programmer board based on the STPM01 Data Brief Features ■ Full compatible with the STPM01 energy meter and with the appropriate manager software ■ Integrated system designed to provide a complete, ready-to-use energy meter ■ High-end solution for power metering based on the STR710 Microcontroller with embedded RTC ■ External memory interface (EMI) ready to drive 1 Mbyte of on-board SRAM. ■ On-board optical insulated serial line ■ On-board charge pump ■ Access to the STPM01 device registers, using a dedicated SPI bus interface u d o r P e t e l o ) (s Applications ■ ) s ( ct Demonstration purposes: – connecting the demonstration board to an AC power source and changing all the settings parameters through the GUI interface and the hardware programmer/ reader board t c u d o r ■ P e STEVAL-IPE005V1 s b O Moreover, the on-board charge pump allows burning the STPM01 energy meter ASSP device registers. Access to the STPM01 device registers is ensured using a dedicated SPI bus interface. The STPM01 programmer kit demonstrates how effectively the STPM01 can be used in real-world energy meter applications and it helps the user to develop his own application. To evaluate and develop a custom application t e l o Description s b O The STEVAL-IPE005V1 demonstration board works in conjunction with the STPM01 energy meter ASSP device and with the STPM01 manager software. It is an integrated system designed to provide the user with a complete, ready-to-use energy meter application. This board is a high-end solution for power metering based on the STR710 microcontroller with an embedded RTC and an external memory interface (EMI) ready to drive 1Mbyte of on-board SRAM. The demonstration board also integrates an on-board optical insulated serial line allowing isolation of the board ground reference in order to avoid propagation of over-voltage on the PC side. November 2008 Rev 1 For further information contact your local STMicroelectronics sales office. 1/11 www.st.com 11 BOOT BOOT_EN SW2 SW1 +3V3 GND BOOT CLK CK RTCXTI RTCXTO +3V3 GND UARTx GND +3V3 +5V TX_0 RX_0 MISO GND MOSI JTCK 6JTMS 5not JTRST 4 I/O1 I/O5 GND I/O4 I/O2 I/O3 U3 not Reset 6 DBGRQS SCLK 5 4 ESDA6V1-5W 6-SOT323-6L 1 2 3 ESDA6V1-5W 6-SOT323-6L I/O1 I/O5 GND I/O4 I/O2 I/O3 U2 ESD JTDI GND 1 JTDO 2 3 JTDI JTDO JTCK JTMS not JTRst not Reset DBGRQS +3V3 GND nW E0 nW E1 nRD CS.1 D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0 nRD nW E0 nW E1 75 76 77 85 18 23 24 25 26 27 28 29 2 137 136 61 62 63 64 65 78 79 80 81 82 92 93 94 95 96 97 98 99 100 101 102 114 115 116 117 118 119 120 121 122 130 131 132 133 134 135 13 14 15 17 7 8 11 12 +3V3 +3V3 VBKP GND VBKP +1V8 +1V8 +5V +5V P1.4/T1.ICAPA P1.5/T1.ICAPB P1.6/T1.OCMPB P1.7/T1.OCMPA P2.8 P2.9 P2.10 P2.11 P2.12 P2.13 P2.14 P2.15 RD WE.0 WE.1 D.0 D.1 D.2 D.3 D.4 D.5 D.6 D.7 D.8 D.9 D.10 D.11 D.12 D.13 D.14 D.15 A.0 A.1 A.2 A.3 A.4 A.5 A.6 A.7 A.8 A.9 A.10 A.11 A.12 A.13 A.14 A.15 A.16 A.17 A.18 A.19 P2.4/A.20 P2.5/A.21 P2.6/A.22 P2.7/A.23 P2.0/CS.0 P2.1/CS.1 P2.2/CS.2 P2.3/CS.3 POWER 85 75 76 18 23 24 25 26 27 28 29 rn12 rn13 22 rn14 D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 D10 D11 D12 D13 D14 D15 A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 A21 A22 A23 7 Cn 11 12 TP10 P1.6 R9 22 R8 R7 22 22 R5 66 STR710FZ2T6-TQFP144 U1 SUPPLY 10uF C49 CK P1.8 P1.9 RSTIN CKOUT P1.10/USBCLK USBDN USBDP not Reset 52 45 45 RTCXTI 49 RTCXTO 50 106 106 91 91 90 90 46 86 105 105 CK TEST1 TEST2 NC NC NC NC NC NC NC DBGROS NC P0.13/U2.RX/T2.OCMPA P0.14/U4.TX/T2.ICAPA P0.10/U1.RX/U1.TX P0.11/U1.TX/BOOT.1 P0.12/SCCLK P0.8/U0.RX/U0.TX P0.9/U0.TX/BOOT.0 P0.4/S1.MISO P0.5/S1.MOSI P0.6/S1.SCLK P0.7/S1.SSN P0.0/S0.MISO/U3.TX P0.1/S0.MOSI/U3.RX P0.2/S0.SCLK/I1.SCL P0.3/S0.SSN/I1.SDA P1.13/HCLK/IO.SCL P1.14/HCLK/IO.SCL P1.14/HTXD P1.11/CANRX P1.12/CANTX P1.0/T3.OCMPB/AIN.0 P1.1/T3.ICAPA/AIN.1 P1.2/T3.OCMPA/AIN.2 P1.3/T3.ICAPB/AIN.3 BOOTEN JTDI JTDO JTCK JTMS JTRST RTCXTI RTCXTO P1.0 P1.1 P1.2 BOOTEN JTDI JTDO JTCK JTMS not JTRST P0.10 Rx_0 Tx_0 P0.4 P0.5 P0.6 P0.7 P0.0 P0.1 P0.2 48 TX_1_I/0 1 34 4 SYSTEM_DEFAULT 910 10 DBGRQS GND 44 35 GND GND 36 19 38 20 19 37 20 39 37 41 39 43 41 48 43 143 144 127 140 141 142 123 124 125126 126 71 72 73 74 74 88 88 89 89 107 107108 108111 111 16 30 33 32 31 34 +3V3 GND +3V3 GND R6 560 SYSTEM_DEFAULT W AKEUP GND +3V3 GND VBKP VBKP +1V8 +1V8 +3V3 +3V3 +5V +5V P0.5 P0.6 P0.0 P0.2 P0.4 SPI_BUFFER GND STR7_WRITE_EN STR7_READ_EN r P e P0.10 P0.7 STR7_SCS STR7_MOSI STR7_MISO STR7_SCL STR7_SYN 3.3V 5V +5V STPM01_SCS STPM01_SDA STPM01_SCLK STPM01_SYN P1.0 P1.1 P1.2 SPI_BUFFER POWER MANAGEMENT RESET R2 560 R4 560 R3 560 RESET C2 100n SW 2 MOMENTARY C1 100n SW 1 MOMENTARY not Reset +3V3 +3V3 +5V ChargePump GND STR7_SBG STR7_SBS STR7_OTP_EN STPM01_SCS STPM01_SDA STPM01_SCL STPM01_SYN +5V0 CHARGE PUMP Microcontroller and main parts schematic Enable UART0 TX 1 2 JTDI JTDO JTCK JTMS not JTRST not Reset DBGRQS +3V3 GND WE0 WE1 not OE not CS_SRAM D15 D14 D13 D12 D11 D10 D9 D8 D7 D6 D5 D4 D3 D2 D1 D0 Rx_0 CS.1 +3V3 t e l o JTAG +3V3 VOUT GND A19 A18 A17 A16 A15 A14 A13 A12 A11 A10 A9 A8 A7 A6 A5 A4 A3 A2 A1 EMI_SRAM +3V3 VOUT GND A19 A18 A17 A16 A15 A14 A13 A12 A11 A10 A9 A8 A7 A6 A5 A4 A3 A2 A1 GND +3V3 +5V OPTO ISOLATED UART J9 BOOTEN TX_1_I/0 Tx_0 +3V3 GND CK RTCXTI RTCXTO +3V3 GND CLK - RTC EMI GPIO PORT 6 22 40 83 104 113 138 V33.1 V33.2 V33.3 V33.4 V33.5 V33.6 V33.7 66 AVDD WAKEUP 47 ORANGE 51 +3V3 P0.15/WAKEUP STBY +1V8 VBKP 58 129 55 V18.1 V18.2 V18BKP GENERAL SYSTEM USB RTC STS ADC CAN I2C0 SPI0 SPI1 s b O UART0 2/11 d o r t c u ) (s s b O DEBUG UART2 UART1 Figure 1. 1 P e t e l o R1 560 1.1 TIMER1 Demonstration board schematics VSS1 VSS2 VSS3 VSS4 VSS5 VSS6 VSS7 VSS8 VSS9 VSSBKP AVSS NC NC NC NC NC NC NC NC NC NC 1 42 59 84 103 112 128 139 5 21 54 67 110 109 110 87 109 7087 6970 6869 6068 5760 5657 5356 53 Demonstration board schematics STEVAL-IPE005V1 Microcontroller and main parts schematic ) s ( ct u d o CN2 1 2 DC-IN9V DC-IN9V 3 VOUT 3 3 1 C13 50V 10n 4 2 5 6 C22 50V 10n +3V3 CB CG CG CG BNX002 B PSG LF01 LD108533 - D2PAK-A VIN U6 1N4001 D6 VOUT +3V3 t c u +5V C24 47uF 2 Enable VBKP 1 ) (s GND C25 25V 100n +5V s b O 2 1 2 GND LD108518 - D2PAK-A VIN J2 1 t e l o J4 C20 50V 10n 2 s b O t e l o +5V C11 50V 10n P e 1 U5 d o r GND 2 Enable 1V8 1 J3 L1 FBEAD 2 +1V8 +3V3 +5V R25 560 R24 560 C17 25V 100n +1V8 +1V8 C15 25V 100n VBKP VBKP u d o ) s ( ct R26 560 1 1 YELLOW D3 BLU D2 GREEN D1 TEST POINT TP4 TEST POINT TP3 Figure 2. 1 1.2 +5V STEVAL-IPE005V1 Demonstration board schematics Power management Power management schematic r P e 3/11 Demonstration board schematics 1.3 STEVAL-IPE005V1 Reset and clock circuits Figure 3. Reset and clock circuits ) s ( ct u d o r P e t e l o ) (s t c u d o r P e t e l o s b O 4/11 s b O STEVAL-IPE005V1 1.4 Demonstration board schematics Boot management and Jtag circuit Figure 4. Boot management and Jtag circuits ) s ( ct u d o r P e t e l o ) (s s b O t c u d o r P e t e l o s b O 5/11 Demonstration board schematics Figure 5. STEVAL-IPE005V1 Opto-isolated UART ) s ( ct u d o r P e t e l o ) (s t c u d o r P e t e l o s b O 6/11 s b O STEVAL-IPE005V1 1.5 Demonstration board schematics External RAM memory Figure 6. External RAM memory ) s ( ct u d o r P e t e l o ) (s s b O t c u d o r P e t e l o s b O 7/11 8/11 CHARGE PUMP FROM STPM01 TO STR7 sy n3V sy n5V rev_0_c8 STR7_MISO STR7_READ_EN STR7_SY N STPM01_SY N read_en3V 1 read_en sda5V 2 miso3V 3 4 5 6 7 1G 1A 1Y 2G 2A 2Y GND VCC 4G 4A 4Y 3G 3A 3Y 14 13 12 11 10 9 8 VCC 4G 4A 4Y 3G 3A 3Y M74HC126 1G 1A 1Y 2G 2A 2Y GND U15 M74HC126 5V 14 13 12 11 10 9 8 3.3V scs3V scs5V write_en3V mosi3V sda5V s b O t e l o SPI BUFFER FROM STR7 TO STPM01 s b O t e l o sclk3V sclk5V P e STR7_SCL STPM01_SCLK U14 ) (s 1 2 3 4 5 6 7 t c u 5V d o r 5V GND STR7_MOSI STPM01_SDA STR7_SCS STPM01_SCS 5V R41 4.7k 3.3V STR7_WRITE_EN rev_0_c10 Figure 7. 3.3V 3.3V 1.6 SPI BUFFER SPI SIGNALS BUFFER Demonstration board schematics STEVAL-IPE005V1 SPI signals buffering SPI signals buffering ) s ( ct u d o r P e 1 2 3 4 5 6 7 VCC 4G 4A 4Y 3G 3A 3Y 14 13 12 11 10 9 8 CON10 STR7_SBG STR7_OTP_EN C33 STR7_SBS STPM01_SDA SCL SYN VCC 100nF 2 4 6 8 10 R30 12K 14 13 12 11 10 9 8 SYN SCL VCC C30 STR7_SBG STPM01_SCL C36 56p STPM01_SYN 1 2 3 4 5 6 7 VCC 6A 6Y 5A 5Y 4A 4Y 1 2 3 J8 14 13 12 11 10 9 8 CON3 VCC R31 12K C34 100nF 10n C35 3 Q3 BC807-25 VOTP STPM01_SYN STR7_OTP_EN STR7_SBS STPM01_SCS STR7_SBG STPM01_SCL STPM01_SDA GND t e l o C38 10n C37 r P e M74HC14 1A 1Y 2A 2Y 3A 3Y GND U13 VCC +5V0 s b O M74HC126 1G 1A 1Y 2G 2A 2Y GND U12 STR7_SBG 1 3 5 7 9 J7 VCC 4G 4A 4Y 3G 3A 3Y M74HC126 1G 1A 1Y 2G 2A 2Y GND 100nF d o r t c u SCS VOTP STR7_SBG STPM01_SCS SCS 1 2 3 4 5 6 7 U11 STPM01_SYN STR7_OTP_EN STR7_SBS STPM01_SCS STR7_SBG STPM01_SCL STPM01_SDA GND 3 1 s b O t e l o 2 P e ) (s 21 10n u d o 3 2 3 BAS70-04/SOT D5 BAS70-04/SOT D4 R28 330 2 47K R29 1K 1u C32 Q4 BC807-25 R27 10uF + C31 VCC Figure 8. 1 1.7 1 STEVAL-IPE005V1 Demonstration board schematics Charge pump and SPI connector Charge pump and SPI connect ) s ( ct 9/11 Revision history 2 STEVAL-IPE005V1 Revision history Table 1. Document revision history Date Revision 24-Nov-2008 1 Changes Initial release. ) s ( ct u d o r P e t e l o ) (s t c u d o r P e t e l o s b O 10/11 s b O STEVAL-IPE005V1 ) s ( ct Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. u d o r P e All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. t e l o No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. ) (s s b O UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. t c u UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. d o r P e t e l o Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. s b O ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2008 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 11/11
STEVAL-IPE005V1 价格&库存

很抱歉,暂时无法提供与“STEVAL-IPE005V1”相匹配的价格&库存,您可以联系我们找货

免费人工找货
STEVAL-IPE005V1
    •  国内价格
    • 1+2575.86480
    • 200+2419.25400

    库存:0