STEVAL-IPR001V1

STEVAL-IPR001V1 RFID reader evaluation board Data Brief Features ■ PC or embedded/autonomous usage ■ USB or RS232 interface ■ 3 possible operating modes: demokit, data collection or auto-write ■ 3 possible power supplies: USB, battery or ACDC adapter ■ Up to 3 CRX14 antenna boards (I2C) ■ RTC ■ Industrial temperature range (µPSD) Description STEVAL-IPR001V1 The purpose of this design is to demonstrate the key features of STMicroelectronics SRxx RFID family. The short-range RFID product family with field proven security features addresses all global security and cost requirements by following worldwide ISO 14443-B standards and free licensing policy. This demo kit features several ways of powering, USB and RS232 interfaces, and PC or standalone operating modes. This diversity eases the system development process on the customer side. Target applications are data collection, access control, medical application, traceability, brand protection, e-purse and vending machines. November 2007 Rev 1 For further information contact your local STMicroelectronics sales office. 1/5 www.st.com 5 JP1 2 1 2 3 4 R3 100k +5V DD+ GND C10 4n7 plusplusplus R2 1k R1 6k8 VUSB V3.3 VPSD VPSD V5.0 C13 100n C15 100n 2 P3.6 JP8 JP8 V5.0 V5.0 1 V3.3 2 1 SDA R13 4k7 P3.7 C16 100n I2C Interface JP7 C14 100n V3.3 SCL R14 4k7 C17 100n V5.0 GND RSTn R9 100k Supply decoupling R12 0 R8 0 CON4 J2 R5 R4 C18 100n VPSD 4 3 2 1 1 V5.0 SDA GND SCL 22 22 OUT KF52/DPAK IN U1 CON4 J3 GND 4 3 2 1 USBR+ USBR- VUSB PC7 PC7 PC7 PC7 C1 47u / 16V PSD Voltage selector + Reset USB1X90B JP2 plus Shottky D3 Shottky USB connector VUSB 9V BATT 1 S1 S1 S2 S2 D1 J4 C2 10u / 6.3V V5.0 SDA GND SCL Shottky D4 Shottky 4 3 2 V5.0 1 SDA GND SCL CON4 3 D2 LE33 Vin Vout GNDGND GNDGND INH NC 1 2 3 4 C6 10u / 6.3V V3.3 USBR+ VPSD GND USBRPC2 TCK TMS PD1 PC7 TDO TDI 1 2 3 4 5 6 7 8 9 10 11 12 13 U5 PD1/CLKIN PC7 PC6/TDO PC5/TDI DEBUG 3.3V Vcc USB+/R+ Vdd (PSD) GND USBPC2/Vstby PC1/TCK PC0/TMS X2 XTAL 32768Hz GND 1 2 3 4 U6 XI XO Vss WDO 12 11 10 9 M41T65 nc I/F/O SCL SDA V3.3 P3.2 SCL SDA 39 38 37 36 35 34 33 32 31 30 29 28 27 C8 100n P3.7 P3.6 C12 22p P3.5 P3.4 XTAL 24MHz Ai5 Ai4 Ai3 Ai2 Ai1X1 C11 22p Ai0 VPSD C7 100n 100n 1 HOLE4 1 1 HOLE3 Ai7 PB7 PB6 V5.0 GND 1 3 5 7 9 2 4 6 8 10 CON10AP J5 Ai6 Ai5 Ai4 V3.3 GND EXD I/F - optional 1 Mounting Holes HOLE1 HOLE2 P1.5/SR/Ai5 P1.4/SC/Ai4 P1.3/TXD1(IrDA)/Ai3 P1.2/RXD1(IrDA)/Ai2 P1.1/T2X/Ai1 uPSD34xxT P1.0/T2/Ai0 Vdd (PSD) XTAL2 XTAL1 P3.7/SCL P3.6/SDA P3.5/C1 P3.4/C0 100n C4 C5 RS232 Interface V3.3 V3.3 V3.3 V3.3 V3.3 V3.3 V3.3 V3.3 V3.3 V3.3 V3.3 V3.3 Turbo uPSD Plus 8 7 6 5 RTC (Real-Time Clock) C3 1u / 6.3V V5.0 U2 13 8 V3.3 16 1 3 4 5 2 6 10 P4.3 11 Rx ST3232E VCC C1+ C1C2+ C2V+ V- T2IN T1IN R1IN R2IN U3 14 7 12 9 Tx P4.2 TxTx Rx GND RJTG1 RJTG2 10k 10k V3.3 V3.3 V3.3 RJTG3 RJTG4 10k 10k JTAG connection T1OUT T2OUT R1OUT R2OUT 5 9 4 8 3 7 2 6 1 P1 3 4 470 470 R10 470 R7 P3.2 GREEN LED 10k R11 GREEN LED D7 RED LED D6 6-pin Mini-DIN (PS/2): 1 - Data 2 - Not Implemented 3 - Ground 4 - Vcc (+5V) 5 - Clock 6 - Not Implemented V5.0 6 4 2 M-DIN_6-R J6 V3.3 V3.3 P3.3 5 3 1 + + + + + + + 2 4 6 8 10 12 14 GND R16 4k7 4p-JTAG CON14AP V5.0 R15 4k7 V3.3 V3.3 PS2 Interface - optional 1 2 SW 1 P3.2 P4.7 P4.6 P4.5 CONNECTOR DB9 J1 1 + 3 + 5GND + 7TDI+ 9V3.3 + 11TMS + 13TCK + TDO LED Indicators + button R6 D5 TMS CP1 C P1 SDC-16 SDC-16 1 2 3 16 15 14 13 nc nc Vcc nc Vss nc nc nc 5 6 7 8 V3.3 PB0 PB1 PB2 PB3 PB4 V3.3 PB5 GND RSTn PB6 PB7 Ai7 Ai6 52 51 50 49 48 47 46 45 44 43 42 41 40 PB0 PB1 PB2 PB3 PB4 Vcc/Vref PB5 GND RESET PB6 PB7 P1.7/SS/Ai7 P1.6/ST/Ai6 P4.7/PCACLK1/SPISEL P4.6/TCM5/SPITXD P4.5/TCM4/SPIRXD P4.4/TCM3/SPICLK P4.3/TXD1(IrDA)/PCACLK0 GND P4.2/TCM2/RXD1(IrDA) P4.1/TCM1/T2X P4.0/TCM0/T2 P3.0/RXD0 P3.1/TXD0 P3.2/TG0/EXINT0 P3.3/TG1/EXINT1 14 15 16 17 18 19 20 21 22 23 24 25 26 P4.7 P4.6 P4.5 P4.4 P4.3 GND P4.2 P4.1 P4.0 P3.0 P3.1 P3.2 P3.3 TCK 2/5 TDO P3.4 PP3.4 PP3.4 PP3.4 P3.4 3.4 3.4 3.4 V5.0 GND GND Figure 1. TDI 1 GND Board schematic STEVAL-IPR001V1 Board schematic Schematic 1/2 22nF50V C43 FL1 RFIN 1 2 3 4 5 6 7 8 CRX14 Vref Vcc RF IN RF OUT E0 GND_RF E1 OSC1 E2 OSC2 GND_RF GND GND SCL GND SDA U1 VCC 16 15 14 13 12 11 10 9 J2 FL2 FL3 FL4 FL5 To RFIN 22u C29 C10 100n 22u R6 22K R3 15K 100n C11 L3 10uH C21 VCC 7pF X2 13.56MHz C45 C44 7pF 180p C5 330p C46 C1 18p 22u 100n C30 C7 C36 36p R10 47 22u C25 R2 8.2K R16 68 R13 10K l9 22uH vcc D2 1N4148 C47 100p L10 22uH From Ant Q2 BCP5616 27p C3 10p C40 150p C39 1uH L11 0.15uH L12 68p C42 C41 C48 0 R9 C49 100p 3.3 option R8 R7 ANT Figure 2. 1 2 3 4 STEVAL-IPR001V1 Board schematic Schematic 2/2 3/5 Revision history 2 STEVAL-IPR001V1 Revision history Table 1. 4/5 Document revision history Date Revision 26-Nov-2007 1 Changes Initial release STEVAL-IPR001V1 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 5/5