STEVAL-MET001V1

STEVAL-MET001V1 LPS22HB adapter board for a standard DIL 24 socket Data brief Description The STEVAL-MET001V1 is an adapter board designed to facilitate the evaluation of MEMS devices in the LPS22HB product family. The board offers an effective solution for fast system prototyping and device evaluation from directly within the user’s application. The STEVAL-MET001V1 can be plugged into a standard DIL 24 socket. The adapter provides the complete LPS22HB pin-out and comes ready-touse with the required decoupling capacitors on the VDD power supply line. Features    Complete LPS22HB pinout for a standard DIL 24 socket Fully compatible with the STEVALMKI109V2 motherboard RoHS compliant February 2016 This adapter is supported by the STEVALMKI109V2 motherboard, which includes a high performance 32-bit microcontroller functioning as a bridge between the sensor and a PC, on which it is possible to use the downloadable graphical user interface (Unico GUI), or dedicated software routines for customized applications. DocID028883 Rev 2 For further information contact your local STMicroelectronics sales office 1/4 www.st.com Schematic diagram 1 STEVAL-MET001V1 Schematic diagram Figure 1: STEVAL-MET001V1 circuit schematic C1 100nF 8 9 VDD_IO GND_IO VDD VDD_IO 1 GND + VCC 10 C2 10uF U1 LPS22HB INT1 7 INT1 C3 100nF VDD_IO 4 5 SDO 3 6 CS SDO CS SDA SCL SDA 2 TESTE SCL GND 2/4 VCC JP1 1 2 3 4 5 6 7 8 9 10 11 12 Header 12 JP2 24 23 22 21 20 19 18 17 16 15 14 13 SDO SDA SCL CS INT1 Header 12 GSPG1901161430SG DocID028883 Rev 2 STEVAL-MET001V1 2 Revision history Revision history Table 1: Document revision history Date Version Changes 19-Jan-2016 1 Initial release. 09-Feb-2016 2 Updated board photo on the cover page. DocID028883 Rev 2 3/4 STEVAL-MET001V1 IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2016 STMicroelectronics – All rights reserved 4/4 DocID028883 Rev 2