STEVAL-MKI015V1

STEVAL-MKI015V1 Data brief LIS344ALH adapter board for a standard DIL24 socket Features • • • Complete LIS344ALH pinout for a standard DIL24 socket Fully compatible with STEVAL-MKI109V2 motherboards RoHS compliant Description The STEVAL-MKI015V1 is an adapter board designed to facilitate the evaluation of the LIS344ALH three-axis analog output linear accelerometer. The board offers an effective solution for fast system prototyping and device evaluation directly within the user's own application. The STEVAL-MKI015V1 can be plugged into a standard DIL24 socket. The adapter provides the complete LIS344ALH pinout and comes ready-to-use with the required decoupling capacitors on the VDD power supply line. This adapter is supported by the STEVAL-MKI109V2 motherboard with high performance 32-bit microcontroller functioning as a bridge between the sensor and a PC, on which it is possible to use the downloadable graphical user interface (Unico GUI), or dedicated software routines for customized applications. Product summary LIS344ALH adapter board for a standard DIL24 socket STEVALMKI015V 3-axis analog accelerometer, ±2 g / ±6 g user selectable full-scale, ultra compact, low power LIS344ALH ST MEMS adapters motherboard based on STM32F103, compatible with all ST MEMS adapter boards STEVALMKI109V2 DB1134 - Rev 3 - November 2018 For further information contact your local STMicroelectronics sales office. www.st.com STEVAL-MKI015V1 Schematic diagram 1 Schematic diagram Figure 1. STEVAL-MKI015V1 board schematic DB1134 - Rev 3 page 2/4 STEVAL-MKI015V1 Revision history Table 1. Document revision history DB1134 - Rev 3 Date Version 08-Oct-2010 1 01-Aug-2017 2 30-Oct-2018 3 Changes Initial release. Updated cover page Features and Description Updated Figure 1 Updated cover page Features and Description page 3/4 STEVAL-MKI015V1 IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2018 STMicroelectronics – All rights reserved DB1134 - Rev 3 page 4/4