STEVAL-MKI158V1

STEVAL-MKI158V1 AIS3624DQ adapter board for a standard DIL24 socket Description The STEVAL-MKI158V1 is an adapter board designed to facilitate the evaluation of MEMS inertial devices in the AIS3624DQ product family. The board offers an effective solution for fast system prototyping and device evaluation directly within the user’s own application. The STEVAL-MKI158V1 can be plugged into a standard DIL24 socket. The adapter provides the complete AIS3624DQ pinout and comes readyto-use with the required decoupling capacitors on the VDD power supply line. Features    Complete AIS3624DQ pin-out for a standard DIL24 socket Fully compatible with STEVAL-MKI109V2 motherboard RoHS compliant February 2015 This adapter is supported by STEVAL-MKI109V2 motherboard which includes a high performance 32-bit microcontroller functioning as a bridge between the sensor and a PC, on which it is possible to use the downloadable graphical user interface (Unico GUI), or dedicated software routines for customized applications. DocID027467 Rev 1 1/4 www.st.com Schematic diagram 1 STEVAL-MKI158V1 Schematic diagram 19 NC 20 NC 21 NC 22 NC 23 VDD_IO 18 17 VDD 16 SDI/SDO/SDA 15 SDO/SA0 14 VDD_IO 13 VDD + C1 100nF GND C2 10µF 1 2 3 4 5 6 7 8 9 10 11 12 Header 12 JP2 24 23 22 21 20 19 18 17 16 15 14 13 SDO/SA0 SDI/SDO/SDA SPC/SCL CS INT_2 INT_1 Header 12 GND CS 12 7 INT_1 GND Reserved CS GND SPC /SCL VDD INT_1 6 SDO/SA0 GND 5 Reserved 11 VDD SDI/SDO/SDA SPC/SCL GND INT_2 GND 4 NC 10 3 NC 9 INT_2 JP1 VDD VDD_IO NC GND 2 U1 AIS3624DQ NC 8 1 NC NC 24 Figure 1: STEVAL-MKI158V1 circuit schematic GSPG0902151030SG 2/4 DocID027467 Rev 1 STEVAL-MKI158V1 2 Revision history Revision history Table 1: Document revision history Date Rev 26-Feb-2015 1 DocID027467 Rev 1 Changes First release. 3/4 STEVAL-MKI158V1 IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2015 STMicroelectronics – All rights reserved 4/4 DocID027467 Rev 1