STEVAL-MKI159V1

STEVAL-MKI159V1 LSM9DS1 adapter board for a standard DIL24 socket Data brief Description The STEVAL-MKI159V1 is an adapter board designed to facilitate the evaluation of MEMS inertial devices in the LSM9DS1 product family. The board offers an effective solution for fast system prototyping and device evaluation directly within the user's own application.The STEVALMKI159V1 can be plugged into a standard DIL24 socket. The adapter provides the complete LSM9DS1 pinout and comes ready to use with the required decoupling capacitors on the VDD power supply line. Features    Complete LSM9DS1 pinout for a standard DIL24 socket Fully compatible with STEVAL-MKI109V2 and STEVAL-MKI109V3 motherboards RoHS compliant September 2016 This adapter is supported by the STEVALMKI109V2 and STEVAL-MKI109V3 motherboards which include a high performance 32-bit microcontroller functioning as a bridge between the sensor and a PC, on which it is possible to use the downloadable graphical user interface (Unico GUI) or dedicated software routines for customized applications. DocID027548 Rev 2 For further information contact your local STMicroelectronics sales office 1/4 www.st.com Schematic diagram 1 STEVAL-MKI159V1 Schematic diagram Figure 1: STEVAL-MKI159V1 circuit schematic Vdd C2 C1 100nF 10uF C5 10nF (25V) Vdd JP1 Vdd_IO 19 20 GND GND 22 23 21 CAP VDD C1 INT1_A/G INT2_A/G 11 12 INT1_A/G INT2_A/G DRDY_M SDO_M INT_M SDO_A/G 9 6 Res 10 SDO SDA/SDI/SDO DRDY_M 5 Res INT1_M SDO VDD 24 4 VDD_IO CS_A/G SDA Res Res 7 C3 100nF U1 LSM9DS1 SCL/SPC 8 3 VDD_IO CS_A/G 2 CS_M 1 SCL CS_M Vdd_IO C4 100nF Res DEN_A/G 18 17 16 15 1 2 3 4 5 6 7 8 9 10 11 12 JP2 24 23 22 21 20 19 18 17 16 15 14 13 DEN_A/G SDO SDA SCL CS_A/G CS_M INT1_M DRDY_M INT2_A/G INT1_A/G Header 12 Header 12 14 13 DEN_A/G GSPG24022015DI1030 2/4 DocID027548 Rev 2 STEVAL-MKI159V1 2 Revision history Revision history Table 1: Document revision history Date Rev Changes 06-Mar-2015 1 First release. 06-Sep-2016 2 Updated features and description adding STEVAL-MKI109V3 motherboard compatibility DocID027548 Rev 2 3/4 STEVAL-MKI159V1 IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2016 STMicroelectronics – All rights reserved 4/4 DocID027548 Rev 2