STEVAL-MKI165V1

STEVAL-MKI165V1 LPS25HB adapter board for a standard DIL 24 socket Data brief Description The STEVAL-MKI165V1 is an adapter board designed to facilitate the evaluation of MEMS devices in the LPS25HB product family. The board offers an effective solution for fast system prototyping and device evaluation directly within the user's own application. Features    Complete LPS25HB pinout for a standard DIL 24 socket Fully compatible with the STEVALMKI109V2 motherboard RoHS compliant December 2014 The STEVAL-MKI165V1 can be plugged into a standard DIL 24 socket. The adapter provides the complete LPS25HB pinout and comes ready-touse with the required decoupling capacitors on the VDD power supply line. This adapter is supported by the STEVAL-MKI109V2 motherboard which includes a high performance 32-bit microcontroller functioning as a bridge between the sensor and a PC, on which it is possible to use the downloadable graphical user interface (Unico GUI), or dedicated software routines for customized applications. DocID027280 Rev 1 For further information contact your local STMicroelectronics sales office 1/4 www.st.com Schematic diagram 1 STEVAL-MKI165V1 Schematic diagram Figure 1: STEVAL-MKI165V1 circuit schematic GSPG1012140955SG 2/4 DocID027280 Rev 1 STEVAL-MKI165V1 2 Revision history Revision history Table 1: Document revision history Date Rev 12-Dec-2014 1 DocID027280 Rev 1 Changes First release. 3/4 STEVAL-MKI165V1 IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2014 STMicroelectronics – All rights reserved 4/4 DocID027280 Rev 1