STEVAL-MKI170V1

STEVAL-MKI170V1 IIS328DQ adapter board for a standard DIL 24 socket Data brief Description The STEVAL-MKI170V1 adapter board is designed to facilitate the evaluation of MEMS devices in the IIS328DQ product family. The board offers an effective solution for fast system prototyping and device evaluation directly inside the user’s application. The STEVAL-MKI170V1 can be plugged into a standard DIL 24 socket. The adapter provides the complete IIS328DQ pin-out and comes ready-touse with the required decoupling capacitors on the VDD power supply line. Features    Complete IIS328DQ pinout for a standard DIL 24 socket Fully compatible with the STEVALMKI109V2 motherboard RoHS compliant January 2016 This adapter is supported by the STEVALMKI109V2 motherboard, which includes a high performance 32-bit microcontroller functioning as a bridge between the sensor and a PC, on which it is possible to use the downloadable graphical user interface (Unico GUI), or dedicated software routines for customized applications. DocID028872 Rev 1 For further information contact your local STMicroelectronics sales office 1/4 www.st.com Schematic diagram 1 STEVAL-MKI170V1 Schematic diagram 19 NC 20 NC 21 NC 22 NC 23 Reserved 15 SDO/SA0 14 VDD_IO 13 VDD 1 2 3 4 5 6 7 8 9 10 11 12 GND JP2 24 23 22 21 20 19 18 17 16 15 14 13 Header12 Header12 2/4 + C2 10uF C1 100nF 12 JP1 VDD VDD_IO SDI/SDO/SDA CS 7 I NT_1 GND VDD 16 CS GND SPC/SCL VDD_IO INT_1 6 VDD GND 5 17 SDO/SA0 11 VDD 18 SDI/SDO/SDA Reserved 10 GND INT_2 SPC/SCL 4 NC GND 3 NC 9 INT_2 NC GND 2 U1 IIS328DQ NC 8 1 NC NC 24 Figure 1: STEVAL-MKI170V1 circuit schematic DocID028872 Rev 1 SDO/SA0 SDI/SDO/SDA SPC/SCL CS INT_2 INT_1 GND GSPG1501161210SG STEVAL-MKI170V1 2 Revision history Revision history Table 1: Document revision history Date Version Changes 21-Jan-2016 1 Initial release. DocID028872 Rev 1 3/4 STEVAL-MKI170V1 IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2016 STMicroelectronics – All rights reserved 4/4 DocID028872 Rev 1