STEVAL-MKI173V1

STEVAL-MKI173V1 LSM303AH adapter board for standard DIL24 socket Data brief Description The STEVAL-MKI173V1 adapter board is designed to facilitate the evaluation of MEMS devices in the LSM303AH product family. The board offers an effective solution for fast system prototyping and device evaluation from directly within the user application. The STEVAL-MKI173V1 can be plugged into a standard DIL24 socket. The adapter provides the complete LSM303AH pinout and comes ready-touse with the required decoupling capacitors on the VDD power supply line. Features    Complete LSM303AH pinout for a standard DIL24 socket Fully compatible with the STEVALMKI109V3 motherboard RoHS compliant October 2016 This adapter is supported by the STEVALMKI109V3 motherboard with a high performance 32-bit microcontroller functioning as a bridge between the sensor and a PC, on which it is possible to use the downloadable graphical user interface (Unico GUI), or dedicated software routines for customized applications. DocID029861 Rev 1 For further information contact your local STMicroelectronics sales office 1/4 www.st.com GND SDA_1 V8 4 0R 3 2 CS_ XL_1V8 R2 1 SCL_ 1V8 SDA GND C4 220nF RES (GND) CS SCL INT1_1V8 12 INT1_XL C1 5 INT2_1V8 11 GND Vdd Vdd_IO DRDY_MAG INT2_XL GND DocID029861 Rev 1 GND 6 2/4 7 INT_MA G_1V8 VDD_1V8 9 8 VDDIO_1 V8 10 LSM303AH U1 GND C1 100nF VDDIO_1V8 GND VDDIO VDD VDDIO_1V8 J2 J1 GND C2 10µF GND C3 100nF VDD_1V8 VDD_1V8 SB2 VDD_1V8 2 1 GND R3 10k VDD VDDIO INT3 INT2 INT1 CS_A CS SCL SD A 1 2 3 4 5 6 7 8 9 10 11 12 JP1 SB7 SB8 SB9 SB10 SB6 SB5 SB4 24 23 22 21 20 19 18 17 16 15 14 13 JP2 GND INT3 INT2 INT1 GND SDA SCL CS CS_A INT_MAG_1V8 INT2_1V8 INT1_1V8 CS_M AG_1V8 CS_XL_1V8 SCL_1 V8 SDA_1 V8 1 2 1 SB3 Schematic diagram STEVAL-MKI173V1 Schematic diagram Figure 1: STEVAL-MKI173V1 circuit schematic GSPG1110161620SG STEVAL-MKI173V1 2 Revision history Revision history Table 1: Document revision history Date Version 18-Oct-2016 1 Changes Initial release. DocID029861 Rev 1 3/4 STEVAL-MKI173V1 IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2016 STMicroelectronics – All rights reserved 4/4 DocID029861 Rev 1