STEVAL-MKI175V1

STEVAL-MKI175V1 LIS2DE12 adapter board for standard DIL24 socket Data brief Description The STEVAL-MKI175V1 is an adapter board designed to facilitate the evaluation of MEMS devices in the LIS2DE12 product family. The board offers an effective solution for fast system prototyping and device evaluation directly inside the user application. The STEVAL-MKI175V1 can be plugged into a standard DIL24 socket. The adapter provides the complete LIS2DE12 pin-out and comes ready-touse with the required decoupling capacitors on the VDD power supply line. Features    Complete LIS2DE12 pinout for a standard DIL24 socket Fully compatible with the STEVALMKI109V2 and STEVAL-MKI109V3 motherboards RoHS compliant October 2016 This adapter is supported by the STEVALMKI109V2 and STEVAL-MKI109V3 motherboards, which include a high performance 32-bit microcontroller functioning as a bridge between the sensor and a PC, on which it is possible to use the downloadable graphical user interface (Unico GUI) or dedicated software routines for customized applications. DocID029833 Rev 1 1/4 www.st.com Schematic diagram 1 STEVAL-MKI175V1 Schematic diagram SCL/SPC 1 CS 2 SDO 3 SDA/SDI/SDO 4 INT1 11 U1 LIS2DE12 INT2 INT1 12 INT2 Figure 1: STEVAL-MKI175V1 circuit schematic SCL/SPC 10 Vdd_IO Vdd_IO VDD CS Vdd SDO/SA0 GND SDA/SDI/SDO GND 9 8 C2 VDD GND 1 2 3 4 5 6 7 8 9 10 11 12 GND JP2 24 23 22 21 20 19 18 17 16 15 14 13 SDO SDA/SDI/SDO SCL/SPC CS Header12 Header12 2/4 GND 7 G ND JP1 Vdd_IO C5 100nF 6 5 Res 100nF + C4 10µF DocID029833 Rev 1 INT2 INT1 GND GSPG0610160950SG STEVAL-MKI175V1 2 Revision history Revision history Table 1: Document revision history Date Version 10-Oct-2016 1 Changes Initial release. DocID029833 Rev 1 3/4 STEVAL-MKI175V1 IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2016 STMicroelectronics – All rights reserved 4/4 DocID029833 Rev 1