STEVAL-MKI177V1

STEVAL-MKI177V1 LPS35HW adapter board for a standard DIL24 socket Data brief Description The STEVAL-MKI177V1 is an adapter board designed to facilitate the evaluation of MEMS devices in the LPS35HW product family. The board offers an effective solution for fast system prototyping and device evaluation directly inside the user’s application. The STEVAL-MKI177V1 can be plugged into a standard DIL24 socket. The adapter provides the complete LPS35HW pin-out and comes ready-touse with the required decoupling capacitors on the VDD power supply line. Features    Complete LPS35HW pinout for a standard DIL24 socket Fully compatible with the STEVALMKI109V2 and STEVAL-MKI109V3 motherboards RoHS compliant October 2016 This adapter is supported by the STEVALMKI109V2 and STEVAL-MKI109V3 motherboards which include a high performance 32-bit microcontroller functioning as a bridge between the sensor and a PC running the downloadable graphical user interface (Unico GUI) or dedicated software routines for customized applications. DocID029829 Rev 1 For further information contact your local STMicroelectronics sales office 1/4 www.st.com Schematic diagram 1 STEVAL-MKI177V1 Schematic diagram Figure 1: STEVAL-MKI177V1 circuit schematic C1 100nF Vdd_IO 1 2 3 4 5 6 7 8 9 10 11 12 INT1 6 Cs SDO 7 SDO JP2 24 23 22 21 20 19 18 17 16 15 14 13 Header 12 Header 12 2/4 INT1 5 SDA SDA JP1 U1 LPS35HW Cs 3 VCC GNDIO 9 SCL/SPC Test E 2 Vdd_IO 4 1 C3 100nF SCL GND 10 V DD Vdd_IO 8 VCC + C2 10µF DocID029829 Rev 1 SDO SDA SCL Cs INT1 GSPG0510160950SG STEVAL-MKI177V1 2 Revision history Revision history Table 1: Document revision history Date Version 07-Oct-2016 1 Changes Initial release. DocID029829 Rev 1 3/4 STEVAL-MKI177V1 IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2016 STMicroelectronics – All rights reserved 4/4 DocID029829 Rev 1