STEVAL-MKI179V1

STEVAL-MKI179V1 LIS2DW12 adapter board for a standard DIL 24 socket Data brief Description The STEVAL-MKI179V1 adapter board is designed to facilitate the evaluation of MEMS devices in the LIS2DW12 product family. The board offers an effective solution for fast system prototyping and device evaluation directly within the user’s own application. The STEVAL-MKI179V1 can be plugged into a standard DIL 24 socket. The adapter provides the complete LIS2DW12 pin-out and comes ready-touse with the required decoupling capacitors on the VDD power supply line. Features    Complete LIS2DW12 pinout for a standard DIL 24 socket Fully compatible with the STEVALMKI109V2 and STEVAL-MKI109V3 motherboards RoHS compliant July 2017 This adapter is supported by the STEVALMKI109V2 and STEVAL-MKI109V3 motherboards, which include a high performance 32-bit microcontroller functioning as a bridge between the sensor and your PC, on which it is possible to use the downloadable graphical user interface (Unico GUI) or dedicated software routines for customized applications. DocID030737 Rev 1 For further information contact your local STMicroelectronics sales office 1/4 www.st.com Schematic diagram 1 STEVAL-MKI179V1 Schematic diagram Figure 1: STEVAL-MKI179V1 circuit schematic JP2 INT2 INT1 GND INT2 SA0 SDA SCL CS U1 LIS2DW 11 24 23 22 21 20 19 18 17 16 15 14 13 12 1 2 3 4 5 6 7 8 9 10 11 12 INT1 JP1 VDD VDDIO SCL 1 CS 2 SA0 3 SDA 4 VDD INT2 INT1 GND SCL/SPC VDDIO Vdd_IO CS Vdd SDO/SA0 GND C1 100nF 9 GND 7 GND GND GND 2/4 GND DocID030737 Rev 1 C2 10µF C3 100nF 8 6 Res 5 RES VDDIO 10 GND SDA/SDI/SDO VDD VDD GND GND STEVAL-MKI179V1 2 Revision history Revision history Table 1: Document revision history Date Version 14-Jul-2017 1 Changes Initial release. DocID030737 Rev 1 3/4 STEVAL-MKI179V1 IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2017 STMicroelectronics – All rights reserved 4/4 DocID030737 Rev 1