STEVAL-MKI207V1

STEVAL-MKI207V1 Data brief ISM330DHCX adapter board for a standard DIL24 socket Features • • • • Complete ISM330DHCX pinout for a standard DIL 24 socket Fully compatible with STEVAL-MKI109V3 motherboards RoHS compliant WEEE compliant Description The STEVAL-MKI207V1 is an adapter board designed to facilitate the evaluation of MEMS devices in the ISM330DHCX product family. The board offers an effective solution for fast system prototyping and device evaluation directly within the user’s own application. The STEVAL-MKI207V1 can be plugged into a standard DIL 24 socket. The adapter provides the complete ISM330DHCX pin-out and comes ready-to-use with the required decoupling capacitors on the VDD power supply line. This adapter is supported by the STEVAL-MKI109V3 with high performance 32-bit microcontroller functioning as a bridge between the sensor and a PC, on which it is possible to use the downloadable graphical user interface (Unico GUI), or dedicated software routines for customized applications. Product summary ISM330DHCX adapter board for a standard DIL24 socket STEVALMKI207V1 3D Accelerometer + 3D Gyro iNEMO Inertial measurement unit (IMU) ISM330DHCX with machine learning core ST MEMS adapter motherboard based on STM32F401VE compatible ST MEMS adapters STEVALMKI109V3 DB4011 - Rev 1 - October 2019 For further information contact your local STMicroelectronics sales office. www.st.com STEVAL-MKI207V1 Schematic diagrams 1 Schematic diagrams SDO 1 CS U1 ISM330DHCX CS 12 SCL SDA 14 SCL 13 SDA Figure 1. STEVAL-MKI207V1 board schematic OSDO SDO 11 P3 OSDO 4 INT1 VDD DNM P4 R3 R0 P24 R4 R0 SCx P5 R5 R0 R6 R0 P17 DNM SDx P6 R7 R0 P16 R8 R0 OSDO 8 VDD DNM GND VDDIO VDDIO 5 R2 R0 6 GND 7 GND INT1 SDx P18 OCS GND SCx 2 SDx 3 SCx 10 OCS OCS 9 INT2 INT2 R1 R0 DNM GND 100nF GND DB4011 - Rev 1 VDDIO C1 GND VDD GND C2 100nF GND VDD VDDIO P3 P4 P5 P6 JP1 JP2 24 1 23 2 22 3 21 4 20 5 19 6 18 7 17 8 16 9 15 10 14 11 13 12 Header 12 Header 12 P24 SDO SDA SCL CS P18 P17 P16 INT2 INT1 GND GND page 2/4 STEVAL-MKI207V1 Revision history Table 1. Document revision history DB4011 - Rev 1 Date Version 04-Oct-2019 1 Changes Initial release. page 3/4 STEVAL-MKI207V1 IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. For additional information about ST trademarks, please refer to www.st.com/trademarks. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2019 STMicroelectronics – All rights reserved DB4011 - Rev 1 page 4/4