STEVAL-MKIT01V2

STEVAL-MKIT01V2 Data brief MEMS sensor sample kit Features • • • • STEVAL-MKI179V1 adapter board for LIS2DW12: – 3-axis MEMS accelerometer, ultra low power, configurable single/doubletap recognition, free-fall, wakeup, portrait/landscape, 6D/4D orientation detection STEVAL-MKI197V1 adapter board for LSM6DSOX: – iNEMO 6DoF inertial module STEVAL-MKI181V1 adapter board for LIS2MDL: – digital 3-axis magnetometer STEVAL-MIC004V1 coupon board for MP23ABS1: – MEMS analog bottom-port microphone Description The STEVAL-MKIT01V2 is a MEMS sensor sample kit containing four sensor adapter boards that can be evaluated in standalone mode by simply connecting an I²C cable and an analog cable for the microphone. The STEVAL-MKIxxxV1 evaluation boards can be plugged into a standard DIL 24 socket and can be used together with the STEVAL-MKI109V3 mother board, based on the STM32F401VET6 microcontroller, for a more in-depth evaluation. The STEVAL-MIC004V1 is a daughter board containing 4 coupon boards with MP23ABS1 microphones. This board can be plugged onto an X-NUCLEO-AMICAM1 expansion board. Product summary LIS2DW12 adapter board for STEVAL-MKI179V1 a standard DIL 24 socket LSM6DSOX adapter board for STEVAL-MKI197V1 a standard DIL24 socket LIS2MDL adapter board for a STEVAL-MKI181V1 standard DIL24 socket Microphone coupon board based on the MP23ABS1 analog MEMS microphone STEVAL-MIC004V1 Applications Audio and Video DB4165 - Rev 1 - March 2020 For further information contact your local STMicroelectronics sales office. www.st.com STEVAL-MKIT01V2 Revision history Table 1. Document revision history DB4165 - Rev 1 Date Version 05-Mar-2020 1 Changes Initial release. page 2/3 STEVAL-MKIT01V2 IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. For additional information about ST trademarks, please refer to www.st.com/trademarks. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2020 STMicroelectronics – All rights reserved DB4165 - Rev 1 page 3/3